MetroVac Air Force Master Blaster MB-3CDSWB220 Manual

MetroVac Støvsuger Air Force Master Blaster MB-3CDSWB220

Læs gratis den danske manual til MetroVac Air Force Master Blaster MB-3CDSWB220 (4 sider) i kategorien Støvsuger. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 2 anmeldelser. Har du et spørgsmål om MetroVac Air Force Master Blaster MB-3CDSWB220, eller vil du spørge andre brugere om produktet?

Side 1/4
Master Blaster Series
ALL MODELS ARE: All Steel Construction; Black Matte Finish; Two 4.0 Peak HP Twin Fan Motor; 18
Amps; 2280 Watts; Air Volume (CFM/ . FPM): 229/58500; 12’ Grounded 3 Conductor Cord
ACCESSORIES: Large Blower Nozzle, Air Flare & Adapter.
Different models and what they come with:
MB-3 (114-141488): Pet Dryer: 2 Speed; 10 ft. Commercial Hose; Crevice Tool; Stationary Wheels.
Wheels.
MB-3CD (103-141709): Car Dryer: 2 Speed; 10 ft. Commercial Hose; Crevice Tool; Inflator Adapter;
Stationary Wheels.
MB-3CDSWB (103-103066): Car Dryer: 2 Speed; 10 ft. Commercial Hose; Crevice Too; Inflator Adapter;
Wall Mount Bracket; Hose Hanger; Swivel Wheels.
MB-3-CDSWB-30 (103-142690): Car Dryer: 2 Speed; 30 ft. Commercial Hose; Crevice Too; Inflator
Adapter; Wall Mount Bracket; Hose Hanger; Swivel Wheels. (Model Shown)
MB-3INDWB (110-578598): Industrial Dryer: 10 ft. Commercial Hose; Wall Mount Backet; Stationary
Wheels.
INSTRUCTIONS (Instructions are general for all MB-3 Models. Some of the below information may
not pertain to your specific model. Check list above for parts and accessories that go with your particular
machine):
Insert the grounded Power Supply Cord into a grounded outlet.
o IMPORTANT: THE PRODUCT MUST BE GROUNDED.
o WARNING: INPROPER CONNECTION OF THE EQUIPMENT GROUNDING
CONDUCTOR CAN RESULT IN A RISK OF ELECTRIC SHOCK!
Fit the hose over the steel tube protruding from the front-end cap of the power unit. Tighten the
adjustable clamp to keep the hose securely on the dryer.
Start the blower:
o 1-Speed: Push the On/Off Switch from left to right.
o Variable: Turn knob from low, clockwise to high.
o ***If you are only using one motor at a time, alternate use of each as to wear the
carbon brushes evenly***.
Attach or remove the attachments to or from the hose to control the air velocity.
CAUTION: If your machine has suction but does not clean when the hose is attached, remove the
hose from the suction end and place it on the blower end. Blow out the hose, it may be clogged.
ADDITIONAL PARTS FOR PURCHASE (the below items are available for purchase on our website
www.MetroVac.com; use the provided product # in the search):
MetroVac Vac Pac for Master Blaster -VACPAC MB
Foam Filters MVC 56F
Hoses:
o 10’ Hose MVC- 56D
o 30’ Hose For Blaster – MVC 56MB 30
Carbon Brushes ABC3
Mounting Bracket MVC- 331
Adapter Cuff MVC-184
Heavy Duty Blower Nozzle MVC-195AA
“Airflare” Utility Nozzle – MVC-195AB
Motorcycle Dryer 5-Piece Attachment Kit BCK-5
Soft Pack Carry All Bag MVC- 420G
Switches (you cannot replace a variable speed switch with a one speed switch or vice versa):
o 1 Speed: MVC- 74
o Variable Speed: MVC- -OHM 46A
Motor MVC-157D
Sealing Gasket MVC 155A
Replacing carbon brushes (ABC-3: should be changed after about 500 hours of use):
1. The front motor needs to be removed to access the back motor.
a. Long Phillips and long flathead are needed to remove the rear motor’s carbon brushes.
2. Remove front endcap.
3. Find wire going to carbon brush and use flathead screwdriver to loosen tab.
4. Use Philips screwdriver to remove carbon brush mounting bracket.


Produkt Specifikationer

Mærke: MetroVac
Kategori: Støvsuger
Model: Air Force Master Blaster MB-3CDSWB220

Har du brug for hjælp?

Hvis du har brug for hjælp til MetroVac Air Force Master Blaster MB-3CDSWB220 stil et spørgsmål nedenfor, og andre brugere vil svare dig