Microchip AT91RM9200 Manual
Microchip
Ikke kategoriseret
AT91RM9200
Læs gratis den danske manual til Microchip AT91RM9200 (18 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Microchip AT91RM9200, eller vil du spørge andre brugere om produktet?
Side 1/18
SMART ARM-based Microcontrollers
AT15004:Using SAM-BA for Linux on SAM
Devices
APPLICATION NOTE
Introduction
A few of the SAM devices are pre-loaded with the Atmel® SAM Boot
Assistant (Atmel SAM-BA®). This bootloader allows In-System Programming
(ISP) from USB host without using any other external programming interface.
SAM-BA has been validated on various Linux distributions such as Ubuntu,
Debian, Fedora, openSUSE, and Mint. However, it will work on other
distributions as well. Tested distributions are listed at www.at91.com/
linux4sam.
This application note describes the steps to install and use SAM-BA on
some popular Linux distributions to program Atmel ARM® based devices.
Features
•Allows to program, verify, and secure an Atmel SAM device without
using a device programmer
•Uses USB CDC class for communicating to the host
•Use SAM-BA Command Line mode to program SAM devices
•Source code for SAM-BA applet is available and can be customized to
user’s needs such as Encrypted loader and custom protocol
Atmel-42728A-Using-SAM-BA-for-Linux-on-SMART-ARM-based-Microcontrollers_AT15004_Application Note-08/2016
Table of Contents
Introduction......................................................................................................................1
Features.......................................................................................................................... 1
1. Introduction to SAM-BA............................................................................................. 3
2. Installing SAM-BA on Different Linux Distributions ...................................................4
2.1. Setup............................................................................................................................................ 4
2.2. Installing SAM-BA.........................................................................................................................4
3. Using SAM-BA ..........................................................................................................6
3.1. Understanding SAM-BA Architecture........................................................................................... 6
3.1.1. SAM-BA Monitor............................................................................................................ 6
3.1.2. Applet Workflow.............................................................................................................7
3.2. Connect device.............................................................................................................................8
3.3. Understanding SAM-BA GUI........................................................................................................9
3.3.1. Memory Display Area.................................................................................................. 10
3.3.1.1. Read Memory............................................................................................10
3.3.1.2. Edit Memory Content................................................................................. 11
3.3.2. Memory Download Area...............................................................................................11
3.3.2.1. Flashing Firmware..................................................................................... 11
3.3.2.2. Reading From Memory.............................................................................. 11
3.3.2.3. Compare Memory with a File.....................................................................12
3.3.3. Script File Functionality................................................................................................12
3.3.3.1. Start/Stop/Reset Recording.......................................................................12
3.3.3.2. Edit the Script File..................................................................................... 12
3.3.3.3. Execute the Script File...............................................................................12
3.4. SAM-BA in command line...........................................................................................................13
4. Tested Devices........................................................................................................ 14
5. FAQ..........................................................................................................................15
6. References.............................................................................................................. 16
7. Revision history....................................................................................................... 17
Atmel AT15004:Using SAM-BA for Linux on SAM Devices [APPLICATION NOTE]
Atmel-42728A-Using-SAM-BA-for-Linux-on-SMART-ARM-based-Microcontrollers_AT15004_Application Note-08/2016
2
Produkt Specifikationer
| Mærke: | Microchip |
| Kategori: | Ikke kategoriseret |
| Model: | AT91RM9200 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Microchip AT91RM9200 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Ikke kategoriseret Microchip Manualer
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
Ikke kategoriseret Manualer
- Light4Me
- Matterport
- Cambo
- Digi-Pas
- Bitspower
- Black Box
- Auto XS
- Intex
- Springfree
- Lucide
- CkeyiN
- BENNING
- Seidio
- Luxli
- Melitta
Nyeste Ikke kategoriseret Manualer
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025