Microchip ATMXT2113TD-MK Manual

Microchip Ikke kategoriseret ATMXT2113TD-MK

Læs gratis den danske manual til Microchip ATMXT2113TD-MK (12 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Microchip ATMXT2113TD-MK, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

 2022 Microchip Technology Inc. and its subsidiaries Product Brief DS40002424A-page 1

mXT2113TD-ATMK/

mXT2113TD-ABMK 1.0

Description

The mXT2113TD-ATMK/mXT2113TD-ABMK 1.0 uses a unique charge-transfer acquisition engine to implement Microchip’s

patented capacitive sensing method. Coupled with a state-of-the-art CPU, the entire touchscreen sensing solution can measure,

classify and track a number of individual finger touches with a high degree of accuracy in the shortest response time.

Automotive Applications

Microchip/Panasonic Knob Technology

• Detect and report the detent (click position) of specific

capacitive mechanical rotary encoders (knobs)

mounted on the touch panel

• Support for up to 4 Knob instances with different size

and number of detents (64 detents maximum)

• Position and size of each knob is individually

configurable. No specific touch pattern required

• Report relative detent position as well as the direction

of rotation

• Configurable suppression area around the knob to

suppress accidental touches from fingers holding the

knob

• Optional push/release function

• Design guidance, tools and other services available

from Microchip and Panasonic

maXTouch® Adaptive Sensing Technology

Keys

Touch Sensor Technology

• Discrete/out-cell support including glass and PET film-

based sensors

• On-cell/touch-on display support including TFT, LCD

(ITPS, IPS) and OLED

• Synchronization with display refresh timing capability

• Support for standard (for example, Diamond) and

proprietary sensor patterns (review of designs by

Microchip or a Microchip-qualified touch sensor

module partner is recommended)

Front Panel Material and Design

• Support for non-rectangular sensor designs (for

example, circular, rounded or with cutouts)

Touch Performance

• Moisture/Water Compensation

- No false touch with condensation

• P2P mutual capacitance measurements supported for

extra sensitive multi-touch sensing

• Noise suppression technology to combat ambient and

power-line noise

• Burst Frequency

- Flexible and dynamic Tx burst frequency selection

to reduce EMC disturbance

- Controlled Tx burst frequency drift over process

and temperature range

• AEC-Q100 Qualified

• CISPR 25 compliant

• Up to 33 X (transmit) lines and 64 Y (receive) lines for

use by a touchscreen and/or 2 key arrays

• A maximum of 2112 nodes can be allocated to the

touch sensor

• Touchscreen size of 16.9 inches (2:1 aspect ratio),

assuming a sensor electrode pitch of 6 mm. The

achievable touchscreen size depends on the knob

requirements

• Multiple touch support with up to 16 concurrent

touches tracked in real time depending on the number

of knobs implemented

• Up to 32 nodes can be allocated as mutual

capacitance sensor keys in addition to the

touchscreen, defined as 2 key arrays (subject to

availability of X and Y lines and other configurations)

• Adjacent Key Suppression (AKS) technology is

supported for false key touch prevention

• Works with PET or glass (dependent on sensor size,

touch size, configuration, stack-up, and dimension and

number of detents of the knob)

• Configuration and stack-up to be approved by

Microchip or a Microchip-qualified touch sensor

module partner

- Up to 240 VPP between 1 Hz and 1 kHz sinusoidal

waveform (no touches)

- Up to 20 VPP between 1 kHz and 1 MHz

sinusoidal waveform

maXTouch 2112-node Touchscreen Controller

Product Brief

mXT2113TD-ATMK/mXT2113TD-ABMK 1.0

DS40002424A-page 2 Product Brief  2022 Microchip Technology Inc. and its subsidiaries

• Scan Speed

- Typical report rate for 10 touches 120 Hz (subject to configuration)

- Initial touch latency <20 ms for first touch from idle (subject to configuration)

- Panasonic Knob rotation speed maximum 80 rpm

- Configurable for power and speed optimization

• Touch panel failure detection

- Automatic touch sensor diagnostics during run time to support the implementation of safety critical features

- Diagnostics reported using dedicated output pin or by standard Object Protocol messages

- Configurable test limits

Enhanced Algorithms

• Dedicated drift calibration algorithm for the knob locations

• Lens bending algorithms to remove display noise

• Touch suppression algorithms to remove unintentional large touches

• Palm Recovery Algorithm for quick restoration to normal state

Data Store

• 60-byte CRC-checksummed data area for use as a run-time Product Data Store Area

• Up to 64 bytes of user’s custom data (not CRC checksummed)

Power Saving

• Programmable timeout for automatic transition from Active to Idle state

• Pipelined analog sensing detection and digital processing to optimize system power efficiency

Application Interfaces

Power Supply

Package

• 144-lead LQFP 20 × 20 × 1.4 mm, 0.5 mm pitch

Operating Temperature

Design Services

• Review of device configuration, stack-up and sensor patterns

• Specific design and tuning tools available as maXTouch Studio plug-ins

• Client interface for main communication with the device. Can be one of:

- I2C interface, with support for Standard mode (up to 100 kHz), Fast mode (up to 400 kHz),

Fast-mode Plus (up to 1 MHz)

- SPI interface (up to 8 MHz)

• Interrupt to indicate when a message is available

• Additional SPI Debug Interface to read the raw data for tuning and debugging purposes

• Digital (Vdd) 3.3V nominal

• Digital I/O (VddIO) 3.3V nominal

• Analog (AVdd) 3.3V nominal

• High voltage external X line drive (XVdd) up to 8.5V

• ATMXT2113TD-ATMK: –40C to +85C (Grade 3)

• ATMXT2113TD-ABMK: –40C to +105C (Grade 2)

Produkt Specifikationer

Mærke:	Microchip
Kategori:	Ikke kategoriseret
Model:	ATMXT2113TD-MK

Har du brug for hjælp?

Hvis du har brug for hjælp til Microchip ATMXT2113TD-MK stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Microchip Manualer

Microchip ATmega1281 Manual

19 Juli 2025

Microchip ATtiny461 Manual

19 Juli 2025

Microchip ATxmega128D3 Manual

19 Juli 2025

Microchip ATxmega128D4 Manual

19 Juli 2025

Microchip ATTINY28 Manual

19 Juli 2025

Microchip ATTINY861 Manual

19 Juli 2025

Microchip ATmega1280 Manual

19 Juli 2025

Microchip ATtiny84A Manual

19 Juli 2025

Microchip ATmega645P Manual

19 Juli 2025

Microchip ATmega16A Manual

19 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Navman MiVue Smartbox 3 Manual

1 August 2025

Navman MiVue 850 Manual

1 August 2025

Navman MiVue 690 Manual

1 August 2025

Navman MiVue 145 GPS TAG Manual

1 August 2025

Navman MY30 Manual

1 August 2025

Tripp Lite SPS610HGRA Manual

1 August 2025

AEG E1WYHSK1 Manual

1 August 2025

Thermaltake Pacific R1 Plus Manual

1 August 2025

Olivetti d-Copia 4523MFplus Manual

1 August 2025

Gossen GL SpectroSoft Manual

1 August 2025