Microchip PL360-EK Manual


Læs gratis den danske manual til Microchip PL360-EK (71 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Microchip PL360-EK, eller vil du spørge andre brugere om produktet?

Side 1/71
PL360
PL360-EK User Guide
Introduction
PL360-EK is an evaluation kit for the PL360 modem for Power Line Communication (PLC) from Microchip
Technology Inc. PL360 is a multi-protocol device implementing a very flexible architecture, which allows
implementation of standard and customized PLC solutions.
PL360 has been conceived to be bundled with an external Microchip MCU, which controls the PL360 PLC modem.
PL360MB is PLC multi-purpose modem board based on the PL360 transceiver and on the SAM4CMS16C ARM
®
Cortex M4 microcontroller. This development board provides a full featured platform to develop a complete
communications system over PLC technology and to demonstrate the high accuracy single phase energy metering
functions of ATSAM4CMS16C device. Microchip provides coupling reference designs for different load options,
targeting common configurations in standard frequency bands complying with existing regulations (CENELEC, FCC
and ARIB).
Contents
Welcome letter introducing the evaluation kit and its contents
• Boards:
Two PL360MBv1 modem boards
Two PLCOUP007v2.5 coupling boards (CENELEC A-
Band)
Two PLCOUP006v2 coupling boards (FCC frequency
band)
• Cables:
Two micro A/B-type USB cables
Two power cord cables IEC320-C8
• Jumpers:
Two jumpers with pitch 5.08 mm
Two jumpers with pitch 2.54 mm
Features
PL360 is a compact and highly efficient device for a wide range of Smart Grid applications such as smart
metering (smart meters and data concentrators), lighting, industrial/home automation, home and building energy
management systems, solar energy and Plug-in Hybrid Electric Vehicle (PHEV) charging stations, among others
PL360 used as G3-PLC or PRIME device includes enhanced features such as additional robust modes and
frequency band extension (up to 472 kHz)
PL360MB board mounts a PL360 transceiver and a SAM4CMS16C ARM Cortex M4 microcontroller. This
development board provides a full featured platform to develop a complete communications system based on
PLC technology, and lets designers evaluate the accuracy of single phase energy metering SoC and develop
code for smart energy applications. PL360MB board provides support for:
PLC band characterization
Noise level measurement
PLC and metrology sensitivity level measurement
Maximum reachable distance
Power consumption
Check PLC performance in different bands (CENELEC, FCC, ARIB) setting different PLC coupling boards
(provided with this evaluation kit)
© 2020 Microchip Technology Inc. User Guide DS50002730B-page 1
Evaluate the high accuracy of single phase energy metering measurements with CT, shunt or Rogowski coil
sensors
Opto Port Interface compliant with ANSI C12.20 protocol
Metering Pulses output pins (Wh, VArh, VAh)
Battery-backed Real-Time Clock (RTC)
Power fail detection
On board Relay Driver circuitry
PL360MB board can be supplied with 100/115/230 V
AC 50-60 Hz power input
PL360MB board includes a JTAG interface for MCU debugging and programming purposes and two debugging
UARTs. And also it provides battery backup and a slow crystal oscillator to support SAM4CMS16C embedded
RTC and low power modes. Several wake-up conditions are available, such as mains crossover detection,
voltage rails recovery condition, anti-tampering sources (TMP0 pad) and Force Wake-up (FWUP) pin
PL360
© 2020 Microchip Technology Inc. User Guide DS50002730B-page 2


Produkt Specifikationer

Mærke: Microchip
Kategori: Ikke kategoriseret
Model: PL360-EK

Har du brug for hjælp?

Hvis du har brug for hjælp til Microchip PL360-EK stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Microchip Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer