Microchip SY58035U Manual


Læs gratis den danske manual til Microchip SY58035U (11 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 13 anmeldelser. Har du et spørgsmål om Microchip SY58035U, eller vil du spørge andre brugere om produktet?

Side 1/11
1
M9999-073010
hbwhelp@micrel.com or (408) 955-1690
DESCRIPTION
Provides six ultra-low skew copies of the selected
input
2:1 MUX input included for clock switchover
applications
Guaranteed AC performance over temperature and
voltage:
Clockfrequencyrange: DCto>4.5GHz
• <320psIN-to-OUTtpd
• <110pstr
/ tf times
• <20psskew(output-to-output)
Ultra-low jitter design:
• 50fsRMSphasejitter(typ)
Lowsupplyvoltageoperation: 2.5Vand3.3V
UniqueinputterminationandVTpinacceptsDC-
coupledandAC-coupledinputs(CML,PECL,LVDS)
Uniqueinputisolationdesignminimizescrosstalk
100KLVPECLcompatibleoutputswing
–40°Cto+85°Ctemperaturerange
Availablein32-pin(5mmx5mm)MLF® package
FEATURES
4.5GHz,1:6LVPECLFANOUT
BUFFERWITH2:1 MUX INPUT
AND INTERNAL TERMINATION
Precision Edge®
SY58035U
APPLICATIONS
Redundantclockdistribution
AllSONET/SDHclock/datadistribution
AllFibreChanneldistribution
AllGigabitEthernetclockdistribution
The SY58035U is a 2.5V/3.3V precision, high-speed, 1:6
fanout capable of handling clocks up to 4.5GHz. A differential
2:1 MUX input is included for redundant clock switchover
applications.
The differential input includes Micrel’s unique, 3-pin input
termination architecture that allows the device to interface
to any differential signal (AC- or DC-coupled) as small as
100mV without any level shifting or termination resistor
networks in the signal path. The outputs are LVPECL (100K,
temperature compensated), with extremely fast rise/fall times
guaranteed to be less than 110ps.
The SY58035U operates from a 2.5V ±5% supply or a
3.3V ±10% supply and is guaranteed over the full industrial
temperature range of 40°C to +85°C. For applications that
require CML outputs, consider the SY58034U or for 400mV
LVPECL outputs the SY58036U. The SY58035U is part of
Micrel’s high-speed, Precision Edge® product line.
All support documentation can be found on Micrel’s web
site at www.micrel.com.
FUNCTIONALBLOCKDIAGRAM
Precision Edge®
Q0
/Q0
Q1
/Q1
Q2
/Q2
Q3
/Q3
Q4
/Q4
Q5
/Q5
IN0
/IN0
V
T0
50
50
IN1
/IN1
V
T1
50
50
0
1
Mux
SEL
(TTL/CMOS)
S
V
REF-AC0
V
REF-AC1
2:1 Mux
1:6 Fanout
Rev.: F Amendment: /0
Issue Date: July 2010
Precision Edge is a registered trademark of Micrel, Inc.
MicroLeadFrame and MLF are registered trademarks of Amkor Technology, Inc.
2
Precision Edge®
SY58035U
Micrel, Inc.
M9999-073010
hbwhelp@micrel.com or (408) 955-1690
PACKAGE/ORDERINGINFORMATION
PinNumber PinName PinFunction
1, 4 IN0, /IN0 Differential Input: These input pairs are the differential signal inputs to the device. These
5, 8 IN1, /IN1 inputs accept AC- or DC-coupled signals as small as 100mV. Each pin of a pair internally
terminates to a VT pin through 50ý. Note that these inputs will default to an indeterminate
state if left open. Please refer to the “Input Interface Applications” section for more details.
2, 6 VT0, VT1 Input Termination Center-Tap: Each side of the differential input pair terminates to a VT
pin. The VT0 and VT1 pins provide a center-tap to a termination network for maximum
   interfaceexibility.See“InputInterfaceApplications”sectionformoredetails.
31 SEL This single-ended TTL/CMOS-compatible input selects the inputs to the multiplexer. Note
   thatthisinputisinternallyconnectedtoa25kΩpull-upresistorandwilldefaulttoalogic
HIGH state if left open. The MUX select switchover function is asynchronous.
10 NC No connect.
11, 16, 18, VCC Positive Power Supply: Bypass with 0.1µF || 0.01µF low ESR capacitors and place as
23, 25, 30 close to the VCC pin as possible.
29, 28 Q0, /Q0, Differential Outputs: These 100K (temperature compensated) LVPECL output pairs are
27, 26 Q1, /Q1, low skew copies of the selected input. Please refer to the “Truth Table” for details.
22, 21 Q2, /Q2,
20, 19 Q3, /Q3,
15, 14 Q4, /Q4,
13, 12 Q5, /Q5
9, 17, 24, 32 GND, Ground: Ground pin and exposed pad must be connected to the same ground plane.
Exposed Pad
3, 7 VREF-AC0 Reference Voltage: These output biases to V
CC–1.2V. It is used for AC-coupling inputs
VREF-AC1 (IN, /IN). Connect VREF-AC directly to the VT pin. Bypass with 0.01µF low ESR capacitor to
VCC. See “Input Interface Applications” section. Maximum sink/source current is ±1.5mA.
Due to the limited drive capability, the VREF-AC pin is only intended to drive its respective
VT pin.
PIN DESCRIPTION
24
23
22
21
20
19
18
17
GND
VCC
Q2
/Q2
Q3
/Q3
VCC
GND
IN0
VT0
VREF-AC0
/IN0
IN1
VT1
VREF-AC1
/IN1
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16
32 31 30 29 28 27 26 25
/Q0
Q0
VCC
SEL
GND
Q1
/Q1
VCC
Q5
/Q5
VCC
NC
GND
/Q4
Q4
VCC
32-PinMLF®(MLF-32)
TRUTHTABLE
SEL
0 IN0 Input Selected
1 IN1 Input Selected
Ordering Information(1)
Package Operating Package Lead
PartNumber Type Range Marking Finish
SY58035UMI MLF-32 Industrial SY58035U Sn-Pb
SY58035UMITR(2) MLF-32 Industrial SY58035U Sn-Pb
SY58035UMG(3) MLF-32 Industrial SY58035U with NiPdAu
Pb-Free bar-line indicator Pb-Free
SY58035UMGTR(2, 3) MLF-32 Industrial SY58035U with NiPdAu
Pb-Free bar-line indicator Pb-Free
Notes:
1. Contact factory for die availability. Dice are guaranteed at T
A = 25°C, DC electricals only.
2. Tape and Reel.
3. Pb-Free package recommended for new designs.


Produkt Specifikationer

Mærke: Microchip
Kategori: Ikke kategoriseret
Model: SY58035U

Har du brug for hjælp?

Hvis du har brug for hjælp til Microchip SY58035U stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Microchip Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer