Mikrotik PL7510Gi Manual

Mikrotik Powerline adapter PL7510Gi

Læs gratis den danske manual til Mikrotik PL7510Gi (5 sider) i kategorien Powerline adapter. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Mikrotik PL7510Gi, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

PWR-LINE PRO

The PWR-LINE PRO allow Ethernet-like connectivity between supported devices over regular electrical power

lines. When plugged into the same electrical circuit, the device will establish Ethernet connectivity by using the

HomePlug AV 2 standard. PWR-LINE PRO does not require any system software or configuration, it's ready to use.

Connecting

Plug one PWR-LINE PRO device into a power socket.

Connect to one of the LAN ports of your MikroTik router to the PWR-LINE PRO Ethernet port.

Plug another PWR-LINE PRO unit (or any other compatible device) somewhere in the same electrical

circuit.

Use the sync button to connect the devices and your local network will automatically be extended. Please

see section on how to pair additional PWR-LINE PRO devices.PWR connection button (sync)

PWR-LINE PRO supports PoE out from Ethernet port to power another Mikrotik device, this can be

activated with a switch, please see section.LED lights and PoE switch

Mounting

PWR-LINE PRO can be mounted on the wall using four provided screws:

1. To access mounting points, remove a center screw, that is holding top cover, using PH2 screwdriver.

2. Mark four points for screw holes in the desired place on the wall for PWR-LINE PRO.

3. Drill using 5 mm drill bit for dowel holes and insert them by slight tapping if necessary.

4. Mount PWR-LINE PRO and close top cover, center screw tightening force 0.5 – 0.7 Nm, attach provided

3M sticker to cover center screw.

The IP rating scale for this device is IPX0.

When mounting indoors, please ensure that cable feed is pointing downwards. We recommend using shielded Cat6

cables for our devices.

Powering

The device accepts powering directly from 100-230 V AC , ~50/60 Hz wall socket it is plugged into. ⏦The

power consumption under maximum load can reach 5 W. Max power consumption with PoE-Out 14 W.

In order to reach a speed of 600 Mbps, your electrical sockets needs to be grounded.

To connect with another PWR-LINE device, both need to be on the one electrical phase.

See mikrotik.com/products for the latest version of this document. Document #49004 Modified on: 14.OCT.2019

Expansion slots and ports

•One Gigabit Ethernet port, supporting 24 V PoE output by default settings is set to OFF.

Buttons and Jumpers

PWR connection button (sync)

•Hold 0.5 – 3 seconds. For 120 seconds will try to communicate with another PWR-LINE PRO device. A

blinking amber LED light indicates that it is in search mode. You have to also do the same on the other

PWR device, so they can synchronize. Press button again to cancel the search.

•Hold 5 – 8 seconds. A new security key is generated. This is needed to remove a PWR-LINE PRO device

from an existing PWR network.

•Hold 10 – 15 seconds. Resets all PWR related settings.

•In case of trouble to pair device, hold the SYNC button for 5 - 8 seconds to generate new network key and

then re-attempt to pair it in PWR-LINE PRO network again holding SYNC button for 0.5 – 3 seconds.

LED lights and PoE switch

1. Blue LED indicates device power ON state.

2. Amber LED indicates that the device is paired, blinking amber indicated that the device is in search mode.

Can be activated with sync button. Please refer to the PWR connection button (sync) section.

3. Green LED indicates Ethernet port connectivity.

4. Red LED indicates that PoE is active.

5. PoE switch by default settings is set to OFF. A standard ballpoint pen can be used to switch positions. The

Red light will indicate that PoE is active.

Accessories

Package includes the following accessories that come with the device:

•K-62 fastening set.

•EU/US power cord, D03+QT1 H03VV-F 0x0.75 mm2, 30 cm RoHS, White color.

Specifications

For more information about this product, specification and pictures please visit our web page:

https://mikrotik.com/product/pl7510gi

See mikrotik.com/products for the latest version of this document. Document #49004 Modified on: 14.OCT.2019

Produkt Specifikationer

Mærke:	Mikrotik
Kategori:	Powerline adapter
Model:	PL7510Gi

Har du brug for hjælp?

Hvis du har brug for hjælp til Mikrotik PL7510Gi stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Powerline adapter Mikrotik Manualer

Mikrotik PWR-Line AP Manual

20 September 2024

Mikrotik PWR-LINE US Manual

25 August 2024

Mikrotik PL7510Gi Manual

7 August 2024

Powerline adapter Manualer

Nyeste Powerline adapter Manualer

Netgear XAV5601 Manual

12 Januar 2025

AVM FRITZ!Powerline 510E Set Manual

30 December 2025

AVM FRITZ!Powerline 1220 Set Manual

30 December 2025

D-Link DHP-329AV Manual

29 December 2024

D-Link DHP-P307AV Manual

23 December 2024

D-Link DHP-W307AV Manual

23 December 2024

D-Link DHP-310AV Manual

19 December 2024

D-Link DHP-307AV Manual

19 December 2024

TRENDnet TPL-422E2K Manual

6 Oktober 2024

D-Link DHP-W220AV Manual

6 Oktober 2024