Milan CPSMC0200-210 Manual

Milan Ikke kategoriseret CPSMC0200-210

Læs gratis den danske manual til Milan CPSMC0200-210 (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Milan CPSMC0200-210, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/5
User’s Guide
CPSMC0200-2x0
Dual-Slot PointSystem™
Chassis
The Transition Networks CPSMC0200-
2x0 series dual-slot PointSystem™
chassis is designed for installation of
one or two selectable Transition
Networks mediaPointSystem™
converter slide-in modules.
Installation . . . . . . . . . . . . . . . . . . . . .2
Technical Specifications . . . . . . . . . . .4
Troubleshooting . . . . . . . . . . . . . . . .5
Compliance Information . . . . . . . . . .6
Contact Us . . . . . . . . . . . . . . . . . . . .7
Part Number Description
CPSMC0200-200 Dual-Slot PointSystem™ chassis intended for installation of any
PointSystem™ media converter slide-in modules.
CPSMC0200-210 Dual-Slot PointSystem™ chassis intended for installation of any
PointSystem™ media converter slide-in modules. Also provides
a Last Gasp trap generation.
Optional Accessories (sold separately)
Part Number Description
SPS-1872-SA Optional External Power Supply; 18-72VDC Stand-Alone
Output: 12.6VDC, 1.0 A
WMBP Optional Wall Mount Bracket; Length: 5.0 in. (127 mm)
WMBV Optional Vertical Mount Bracket; 5.0 in. (127 mm)
WMBD Optional DIN Rail Mount Bracket; 5.0 in. (127 mm)
224-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600
CPSMC0200-200 / CPSMC0200-210
Installation
Installing a slide-in module
CAUTION: Do NOT install Two (2) PointSystem™ media converter slide-in
modules whose total power requirements exceed 12 W (with a maximum of 6 W per
slot). Failure to observe this caution could cause data transfer to fail and also could
result in damage to, and subsequent failure of, the media converter slide-in module.
CAUTION: Wear a grounding device and observe electrostatic discharge
precautions when installing the media converter slide-in module in to the dual-slot
chassis. Failure to observe this caution could result in damage to, and subsequent
failure of, the media converter slide-in module.
NOTE: If only one slide-in module is to be installed into the dual-slot chassis,
ensure network standards compliance by obtaining a custom faceplate
(P/N CPSFP-200) from Transition Networks for installation into the
second, unused slot.
To install a slide-in module into the dual-slot chassis:
1. Refer to the user’s guide that comes with the slide-in module to ensure that any
switches or jumpers on the slide-in module circuit board are set correctly for
the site installation.
2. Carefully align the slide-in module with the chassis installation guides and
slide the module into the installation slot.
3. Ensure that the slide-in module is firmly seated inside the chassis.
4. Push in and rotate the attached panel faster screw clockwise to secure the slide-
in module to the chassis front.
5. Repeat steps 1-4 for the second slide-in module.
Panel Fastener
techsupport@transition.com “Transition Now”-- Click the link for a live Web chat. 3
Installation -- Continued
Power the Chassis
To supply AC power to the dual-slot chassis:
1. Locate an appropriate 12 volt power adapter for the installed media converter
slide-in module(s).
2. Connect the barrel connector on the power adapter to the dual-slot chassis
power port (located on the back of the chassis).
3. Connect the power adapter plug to AC power.
4. Verify that the dual-slot chassis is powered by observing the illuminated
LED(s) on the installed slide-in module(s).
To supply DC power to the dual-slot chassis:
Consult the user’s guide for the Transition Networks SPS1872-xx DC external
power supply for powering the dual-slot chassis.
Last Gasp Option (CPSMC0200-210 model only)
The CPSMC0200-210 model features the Last Gasp option, which enables the
device to send out an SNMP trap to the device in the event of a power failure;
alerting the management console that the device has failed.

Produkt Specifikationer

Mærke: Milan
Kategori: Ikke kategoriseret
Model: CPSMC0200-210

Har du brug for hjælp?

Hvis du har brug for hjælp til Milan CPSMC0200-210 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Milan Manualer

Milan

Milan SESPM-4P-PMB Manual

30 August 2024
Milan

Milan CPSMC0200-210 Manual

30 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

EasyMaxx

EasyMaxx 00632 Manual

3 Oktober 2025
Sony

Sony ODBK-201 Manual

3 Oktober 2025
Sony

Sony CCMC-SA10 Manual

3 Oktober 2025
Arctic

Arctic Céramique 2 Manual

3 Oktober 2025
EasyMaxx

EasyMaxx 12803 Manual

3 Oktober 2025
Sony

Sony BKM-200M Manual

3 Oktober 2025
EasyMaxx

EasyMaxx 01950 Manual

3 Oktober 2025
EasyMaxx

EasyMaxx 00629 Manual

3 Oktober 2025
EasyMaxx

EasyMaxx 15642 Manual

3 Oktober 2025
Vestil

Vestil EHLTP-3064-1-60-A3 Manual

3 Oktober 2025