Milwaukee M18 Fuel 2724-20 Manual

Milwaukee Løvblæser M18 Fuel 2724-20

Læs gratis den danske manual til Milwaukee M18 Fuel 2724-20 (12 sider) i kategorien Løvblæser. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 3 anmeldelser. Har du et spørgsmål om Milwaukee M18 Fuel 2724-20, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

Cat. No. / No de cat.

2724-20

M18™ FUEL™ BLOWER

SOUFFLANTE FUEL™ M18™

SOPLADOR FUEL™ M18™

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

WARNING To reduce the risk of injury, user must read and understand operator's manual.

AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien

comprendre le manuel.

ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

IMPORTANT

SAFETY

INSTRUCTIONS

WARNING

Read all safety warnings,

instructions, illustrations

and specications provided with this power tool.

Failure to follow all instructions listed below may result

in electric shock, re and/or serious injury. Save all

warnings and instructions for future reference.

READ ALL INSTRUCTIONS

BEFORE USE

WORK AREA SAFETY

•Do not use in the presence of explosive dust, liquids

or vapors. Power tools have motors and other parts

that can produce sparks during normal use. Do not

use within 30 feet of areas where explosive materials

may be present (such as gasoline pumps and places

where liquids like paint thinners, cleaners, solvents,

etc. are stored).

• Do not use where oxygen or anesthetics are used.

• Do not allow to be used as a toy. Close attention

is necessary when used by or near children. Store

idle power tools out of the reach of children and do

not allow persons unfamiliar with the power tool or

these instructions to operate the power tool. Power

tools are dangerous in the hands of untrained users.

•Use extra care when using on stairs. Do not over-

reach. Keep proper footing and balance at all times.

Keep work area clean and well lit. This enables

better control of the tool in unexpected situations.

•Avoid dangerous environmental conditions. To

reduce the risk of electric shock, do not expose to

rain. Store tool indoors.

• Inspect the area before using the power tool. Remove

all debris and hard objects such as rocks, glass, wire,

etc. that can ricochet, be thrown, or otherwise cause

injury or damage during operation.

PERSONAL SAFETY

• Stay alert, watch what you are doing and use com-

mon sense when operating a power tool. Do not

use a power tool while you are tired or under the

inuence of drugs, alcohol or medication. A moment

of inattention while operating power tools may result in

serious personal injury.

•Always wear eye protection. Use of this tool can

result in foreign objects being blown into eyes,

which can result in eye damage.

•Wear a face or dust mask when working in dust situ-

ations. Dust particles can harm your lungs.

• Use personal protective equipment. Protective equip-

ment such as hearing protection, protective clothing, and

non-skid safety shoes used for appropriate conditions

will reduce personal injuries.

• Dress properly. Do not wear loose clothing or

jewelry. Keep your hair and clothing away from

moving parts. Loose clothes, jewelry or long hair can

be caught in moving parts.

• Do not point tool at self or bystanders. Keep bystand-

ers 50' away during use. Objects may be thrown or

ricochet in all directions.

• Do not let familiarity gained from frequent use of

tools allow you to become complacent and ignore

tool safety principles. A careless action can cause

severe injury within a fraction of a second.

POWER TOOL USE AND CARE

• Use the power tool, accessories, etc. in accordance

with these instructions, taking into account the

working conditions and the work to be performed.

Use of the power tool for operations di󰀨erent from those

intended could result in a hazardous situation.

• Prevent unintentional starting. Ensure the switch

is in the o󰀨-position before connecting to power

source and/or battery pack, picking up or carrying

the tool. Carrying power tools with your nger on the

switch or energizing power tools that have the switch

on invites accidents.

• Use the correct power tool for your application. The

correct power tool will do the job better and safer at the

rate for which it was designed.

• Use only as described in this manual. Use only

manufacturer’s recommended attachments.

• Do not point tool at anything that is burning or

smoking such as cigarettes, matches, or hot ashes.

•To reduce the risk of health hazards from vapors or

dust, do not use tool near tool toxic, carcinogenic

or other hazardous materials such as asbestos,

arsenic, barium, beryllium, lead, pesticides or other

health endangering materials.

•

WARNING

Some dust created by power

sanding, sawing, grinding,

drilling, and other construction activities contains

chemicals known to cause cancer, birth defects or

other reproductive harm. Some examples of these

chemicals are:

• lead from lead-based paint

• crystalline silica from bricks and cement and other

masonry products, and

• arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on

how often you do this type of work. To reduce your

exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, such

as those dust masks that are specially designed to lter

out microscopic particles.

• Do not use power tool if the switch does not turn it

on and o󰀨. Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

•Avoid accidental starting. Ensure the switch is

in the o󰀨-position before inserting battery pack.

Inserting battery packs in tools that have the switch on

invites accidents.

• Do not put hands or objects into openings. Do not

use with any opening blocked; keep free of dust, lint,

hair, and anything else that may reduce air ow.

• Keep handles and grasping surfaces dry, clean

and free from oil and grease. Slippery handles and

grasping surfaces do not allow for safe handling and

control of the tool in unexpected situations.

• Maintain power tools and accessories. Check for

misalignment or binding of moving parts, breakage

of parts and any other condition that may a󰀨ect the

power tool’s operation. If damaged, have the power

tool repaired before use. Many accidents are caused

by poorly maintained power tools.

BATTERY PACK USE AND CARE

• Remove the battery pack from the power tool before

making any adjustments, changing accessories,

storing, or any time the power tool is not in use.

Such preventive safety measures reduce the risk of

starting the power tool accidentally.

•Turn o󰀨 power tool before removing battery pack.

• Do not handle battery pack, tool, or charger (including

charger plug and terminals) with wet hands.

Produkt Specifikationer

Mærke:	Milwaukee
Kategori:	Løvblæser
Model:	M18 Fuel 2724-20

Har du brug for hjælp?

Hvis du har brug for hjælp til Milwaukee M18 Fuel 2724-20 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Løvblæser Milwaukee Manualer

Milwaukee M18 Fuel 3017-20 Manual

13 August 2025

Milwaukee M18 Fuel 2724-20 Manual

12 August 2025

Milwaukee M18 FUEL F2BL Manual

8 August 2025

Milwaukee M12 BBL Manual

8 August 2025

Milwaukee M18 Fuel F2BPB Manual

7 Juli 2025

Milwaukee M18 Fuel 3017-21HD Manual

3 Januar 2025

Milwaukee M18 BBL Manual

2 September 2024

Milwaukee M18 Fuel 2728-21HD Manual

26 Juli 2024

Milwaukee M18 FBL Manual

24 December 2023

Milwaukee M18 Fuel 2724-21HD Manual

24 December 2022

Løvblæser Manualer

Nyeste Løvblæser Manualer

Weibang INTREPID 80 LVP Manual

13 August 2025

Black Decker BEBLV230 Manual

10 August 2025

Sun Joe SBJ601E Manual

9 August 2025

Stihl BGA 300.0 Manual

9 August 2025

DeWalt DCM572 Manual

8 August 2025

DeWalt DCMBA572 Manual

8 August 2025

Stiga BL 300e Manual

8 August 2025

Flymo Twister 2500 Manual

3 August 2025

Cecotec AirForce 3300 Crush&Go Manual

3 August 2025

Cecotec AirForce 2in1 MultiFunction Manual

3 August 2025