Milwaukee M18 Fuel 3017-20 Manual

Milwaukee Løvblæser M18 Fuel 3017-20

Læs gratis den danske manual til Milwaukee M18 Fuel 3017-20 (16 sider) i kategorien Løvblæser. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 13 anmeldelser. Har du et spørgsmål om Milwaukee M18 Fuel 3017-20, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

Cat. No. / No de Cat.

3017-20

M18 FUEL™ BLOWER

SOUFFLANTE M18 FUEL™

SOPLADOR M18 FUEL™

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

WARNING To reduce the risk of injury, user must read and understand operator's manual.

AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien

comprendre le manuel.

ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

WARNING To reduce the risk of injury, user must read and understand operator's manual.

AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien

comprendre le manuel.

ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

IMPORTANT

SAFETY

INSTRUCTIONS

WARNING

Read all safety warn-

ings, instructions, il-

lustrations and specications provided with this

power tool. Failure to follow all instructions listed

below may result in electric shock, re and/or serious

injury. Save all warnings and instructions for fu-

ture reference.

READ ALL INSTRUCTIONS

BEFORE USE

WORK AREA SAFETY

•Do not use in the presence of explosive dust,

liquids or vapors. Power tools have motors

and other parts that can produce sparks during

normal use. Do not use within 30 feet of areas

where explosive materials may be present (such

as gasoline pumps and places where liquids like

paint thinners, cleaners, solvents, etc. are stored).

• Do not use where oxygen or anesthetics are

used.

• Do not permit children to use blower. It is not a

toy. Close attention is necessary when used near

children. Store idle power tools out of the reach

of children and do not allow persons unfamiliar

with the power tool or these instructions to oper-

ate the power tool. Power tools are dangerous in

the hands of untrained users.

•Use extra care when using on stairs. Do not over-

reach. Keep proper footing and balance at all

times. Keep work area clean and well lit. This en-

ables better control of the tool in unexpected situations.

•Avoid dangerous environmental conditions. To

reduce the risk of electric shock, do not expose

to rain. Store tool indoors.

• Inspect the area before using the power tool.

Remove all debris and hard objects such as rocks,

glass, wire, etc. that can ricochet, be thrown, or

otherwise cause injury or damage during operation.

PERSONAL SAFETY

• Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the inuence of drugs, alcohol or medication. A

moment of inattention while operating power tools

may result in serious personal injury.

•Always wear eye protection. Use of this tool can

result in foreign objects being blown into eyes,

which can result in eye damage.

•Wear a face or dust mask when working in dust

situations. Dust particles can harm your lungs.

• Use personal protective equipment. Protective

equipment such as protective clothing, and non-skid

safety shoes used for appropriate conditions will

reduce personal injuries.

• Dress properly. Do not wear loose clothing or

jewelry. Keep your hair and clothing away from

moving parts. Loose clothes, jewelry or long hair

can be caught in moving parts.

• Do not point tool at self or bystanders. Keep

bystanders 50' away during use. Objects may be

thrown or ricochet in all directions.

• Do not let familiarity gained from frequent use

of tools allow you to become complacent and

ignore tool safety principles. A careless action can

cause severe injury within a fraction of a second.

POWER TOOL USE AND CARE

• Use the power tool, accessories, etc. in ac-

cordance with these instructions, taking into

account the working conditions and the work

to be performed. Use of the power tool for opera-

tions di󰀨erent from those intended could result in a

hazardous situation.

• Prevent unintentional starting. Ensure the switch

is in the o󰀨-position before connecting to power

source and/or battery pack, picking up or carrying

the tool. Carrying power tools with your nger on

the switch or energizing power tools that have the

switch on invites accidents.

• Use the correct power tool for your application.

The correct power tool will do the job better and

safer at the rate for which it was designed.

• Use only as described in this manual. Use only

manufacturer’s recommended attachments.

• Do not point tool at anything that is burning or

smoking such as cigarettes, matches, or hot ashes.

•To reduce the risk of health hazards from vapors

or dust, do not use tool near tool toxic, carcino-

genic or other hazardous materials such as as-

bestos, arsenic, barium, beryllium, lead, pesticides

or other health endangering materials.

•

WARNING

Some dust created by

power sanding, sawing,

grinding, drilling, and other construction activities

contains chemicals known to cause cancer, birth

defects or other reproductive harm. Some examples

of these chemicals are:

• lead from lead-based paint

• crystalline silica from bricks and cement and other

masonry products, and

• arsenic and chromium from chemically-treated

lumber.

Your risk from these exposures varies, depending

on how often you do this type of work. To reduce

your exposure to these chemicals: work in a well

ventilated area, and work with approved safety

equipment, such as those dust masks that are spe-

cially designed to lter out microscopic particles.

• Do not use power tool if the switch does not

turn it on and o󰀨. Any power tool that cannot be

controlled with the switch is dangerous and must be

repaired.

• Avoid accidental starts. Make sure the switch is

in the o󰀨 position before inserting the battery

pack. Inserting the battery pack into the tool with

the switch on increases the risk of accidents.

• Do not put hands or objects into openings. Do

not use with any opening blocked; keep free of dust,

lint, hair, and anything else that may reduce air ow.

• Keep handles and grasping surfaces dry, clean

and free from oil and grease. Slippery handles and

grasping surfaces do not allow for safe handling and

control of the tool in unexpected situations.

Produkt Specifikationer

Mærke:	Milwaukee
Kategori:	Løvblæser
Model:	M18 Fuel 3017-20

Har du brug for hjælp?

Hvis du har brug for hjælp til Milwaukee M18 Fuel 3017-20 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Løvblæser Milwaukee Manualer

Milwaukee M18 BLHSB Manual

8 Oktober 2025

Milwaukee M18 Fuel 3017-20 Manual

13 August 2025

Milwaukee M18 Fuel 2724-20 Manual

12 August 2025

Milwaukee M18 FUEL F2BL Manual

8 August 2025

Milwaukee M12 BBL Manual

8 August 2025

Milwaukee M18 Fuel F2BPB Manual

7 Juli 2025

Milwaukee M18 Fuel 3017-21HD Manual

3 Januar 2025

Milwaukee M18 BBL Manual

2 September 2024

Milwaukee M18 Fuel 2728-21HD Manual

26 Juli 2024

Milwaukee M18 FBL Manual

24 December 2023

Løvblæser Manualer

Nyeste Løvblæser Manualer

NEO Tools 04-625 Manual

7 Oktober 2025

Shindaiwa EB770 Manual

6 Oktober 2025

Shindaiwa EB2510 Manual

6 Oktober 2025

Kress KG584.9 Manual

6 Oktober 2025

Shindaiwa EB262 Manual

6 Oktober 2025

Shindaiwa EB8520RT Manual

6 Oktober 2025

Shindaiwa EB810 Manual

6 Oktober 2025

Shindaiwa EB600RT Manual

6 Oktober 2025

Shindaiwa EB3410 Manual

6 Oktober 2025

Shindaiwa EBS256S Manual

6 Oktober 2025