Milwaukee M18 Fuel 2728-21HD Manual

Milwaukee Løvblæser M18 Fuel 2728-21HD

Læs gratis den danske manual til Milwaukee M18 Fuel 2728-21HD (16 sider) i kategorien Løvblæser. Denne vejledning er vurderet som hjælpsom af 41 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 21 anmeldelser. Har du et spørgsmål om Milwaukee M18 Fuel 2728-21HD, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

Cat. No. / No de cat.

2728-20

M18™ BLOWER

SOUFFLANTE M18™

SOPLADOR M18™

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

WARNING To reduce the risk of injury, user must read and understand operator's manual.

AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien

comprendre le manuel.

ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

IMPORTANT

SAFETY

INSTRUCTIONS

WARNING

Read all safety warnings,

instructions, illustrations

and specications provided with this power tool.

Failure to follow all instructions listed below may

result in electric shock, re and/or serious injury.

Save all warnings and instructions for future

reference.

READ ALL INSTRUCTIONS

BEFORE USE

WORK AREA SAFETY

•Do not use in the presence of explosive dust,

liquids or vapors. Power tools have motors

and other parts that can produce sparks during

normal use. Do not use within 30 feet of areas

where explosive materials may be present (such

as gasoline pumps and places where liquids like

paint thinners, cleaners, solvents, etc. are stored).

• Do not use where oxygen or anesthetics are

used.

• Do not allow to be used as a toy. Close attention

is necessary when used by or near children.

Store idle power tools out of the reach of chil-

dren and do not allow persons unfamiliar with

the power tool or these instructions to operate

the power tool. Power tools are dangerous in the

hands of untrained users.

•Use extra care when using on stairs. Do not over-

reach. Keep proper footing and balance at all

times. Keep work area clean and well lit. This en-

ables better control of the tool in unexpected situations.

•Avoid dangerous environmental conditions. To

reduce the risk of electric shock, do not expose

to rain. Store tool indoors.

• Inspect the area before using the power tool.

Remove all debris and hard objects such as rocks,

glass, wire, etc. that can ricochet, be thrown, or

otherwise cause injury or damage during operation.

PERSONAL SAFETY

• Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the inuence of drugs, alcohol or medication. A

moment of inattention while operating power tools

may result in serious personal injury.

•Always wear eye protection. Use of this tool can

result in foreign objects being blown into eyes,

which can result in eye damage.

•Wear a face or dust mask when working in dust

situations. Dust particles can harm your lungs.

• Use personal protective equipment. Protective

equipment such as hearing protection, protective

clothing, and non-skid safety shoes used for ap-

propriate conditions will reduce personal injuries.

• Dress properly. Do not wear loose clothing or

jewelry. Keep your hair and clothing away from

moving parts. Loose clothes, jewelry or long hair

can be caught in moving parts.

• Do not point tool at self or bystanders. Keep

bystanders 50' away during use. Objects may be

thrown or ricochet in all directions.

• Do not let familiarity gained from frequent use

of tools allow you to become complacent and

ignore tool safety principles. A careless action can

cause severe injury within a fraction of a second.

POWER TOOL USE AND CARE

• Use the power tool, accessories, etc. in ac-

cordance with these instructions, taking into

account the working conditions and the work

to be performed. Use of the power tool for opera-

tions different from those intended could result in a

hazardous situation.

• Prevent unintentional starting. Ensure the switch

is in the off-position before connecting to power

source and/or battery pack, picking up or carrying

the tool. Carrying power tools with your nger on

the switch or energizing power tools that have the

switch on invites accidents.

• Use the correct power tool for your application.

The correct power tool will do the job better and

safer at the rate for which it was designed.

• Use only as described in this manual. Use only

manufacturer’s recommended attachments.

• Do not point tool at anything that is burning or

smoking such as cigarettes, matches, or hot ashes.

•To reduce the risk of health hazards from vapors

or dust, do not use tool near tool toxic, carcino-

genic or other hazardous materials such as as-

bestos, arsenic, barium, beryllium, lead, pesticides

or other health endangering materials.

•

WARNING

Some dust created by

power sanding, sawing,

grinding, drilling, and other construction activities

contains chemicals known to cause cancer, birth

defects or other reproductive harm. Some examples

of these chemicals are:

• lead from lead-based paint

• crystalline silica from bricks and cement and other

masonry products, and

• arsenic and chromium from chemically-treated

lumber.

Your risk from these exposures varies, depending

on how often you do this type of work. To reduce

your exposure to these chemicals: work in a well

ventilated area, and work with approved safety

equipment, such as those dust masks that are spe-

cially designed to lter out microscopic particles.

• Do not use power tool if the switch does not

turn it on and off. Any power tool that cannot be

controlled with the switch is dangerous and must be

repaired.

•Avoid accidental starting. Ensure the switch is

in the off-position before inserting battery pack.

Inserting battery packs in tools that have the switch

on invites accidents.

• Do not put hands or objects into openings. Do

not use with any opening blocked; keep free of dust,

lint, hair, and anything else that may reduce air ow.

• Keep handles and grasping surfaces dry, clean

and free from oil and grease. Slippery handles and

grasping surfaces do not allow for safe handling and

control of the tool in unexpected situations.

• Maintain power tools and accessories. Check for

misalignment or binding of moving parts, break-

age of parts and any other condition that may

affect the power tool’s operation. If damaged,

have the power tool repaired before use. Many

accidents are caused by poorly maintained power

tools.

Produkt Specifikationer

Mærke:	Milwaukee
Kategori:	Løvblæser
Model:	M18 Fuel 2728-21HD

Har du brug for hjælp?

Hvis du har brug for hjælp til Milwaukee M18 Fuel 2728-21HD stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Løvblæser Milwaukee Manualer

Milwaukee M18 Fuel 3017-20 Manual

13 August 2025

Milwaukee M18 Fuel 2724-20 Manual

12 August 2025

Milwaukee M18 FUEL F2BL Manual

8 August 2025

Milwaukee M12 BBL Manual

8 August 2025

Milwaukee M18 Fuel F2BPB Manual

7 Juli 2025

Milwaukee M18 Fuel 3017-21HD Manual

3 Januar 2025

Milwaukee M18 BBL Manual

2 September 2024

Milwaukee M18 Fuel 2728-21HD Manual

26 Juli 2024

Milwaukee M18 FBL Manual

24 December 2023

Milwaukee M18 Fuel 2724-21HD Manual

24 December 2022

Løvblæser Manualer

Nyeste Løvblæser Manualer

Weibang INTREPID 80 LVP Manual

13 August 2025

Black Decker BEBLV230 Manual

10 August 2025

Sun Joe SBJ601E Manual

9 August 2025

Stihl BGA 300.0 Manual

9 August 2025

DeWalt DCM572 Manual

8 August 2025

DeWalt DCMBA572 Manual

8 August 2025

Stiga BL 300e Manual

8 August 2025

Flymo Twister 2500 Manual

3 August 2025

Cecotec AirForce 3300 Crush&Go Manual

3 August 2025

Cecotec AirForce 2in1 MultiFunction Manual

3 August 2025