Milwaukee M18 Fuel 2724-21HD Manual

Milwaukee Løvblæser M18 Fuel 2724-21HD

Læs gratis den danske manual til Milwaukee M18 Fuel 2724-21HD (26 sider) i kategorien Løvblæser. Denne vejledning er vurderet som hjælpsom af 48 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 24.5 anmeldelser. Har du et spørgsmål om Milwaukee M18 Fuel 2724-21HD, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/26
Cat. No. / No de cat.
2724-20
M18™ FUEL™ BLOWER
SOUFFLANTE FUEL™ M18™
SOPLADOR FUEL™ M18™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
2
IMPORTANT
SAFETY
INSTRUCTIONS
WARNING
Read all safety warnings,
instructions, illustrations
and specications provided with this power tool.
Failure to follow all instructions listed below may result
in electric shock, re and/or serious injury. Save all
warnings and instructions for future reference.
READ ALL INSTRUCTIONS
BEFORE USE
WORK AREA SAFETY
•Do not use in the presence of explosive dust, liquids
or vapors. Power tools have motors and other parts
that can produce sparks during normal use. Do not
use within 30 feet of areas where explosive materials
may be present (such as gasoline pumps and places
where liquids like paint thinners, cleaners, solvents,
etc. are stored).
• Do not use where oxygen or anesthetics are used.
• Do not allow to be used as a toy. Close attention
is necessary when used by or near children. Store
idle power tools out of the reach of children and do
not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
•Use extra care when using on stairs. Do not over-
reach. Keep proper footing and balance at all times.
Keep work area clean and well lit. This enables
better control of the tool in unexpected situations.
•Avoid dangerous environmental conditions. To
reduce the risk of electric shock, do not expose to
rain. Store tool indoors.
• Inspect the area before using the power tool. Remove
all debris and hard objects such as rocks, glass, wire,
etc. that can ricochet, be thrown, or otherwise cause
injury or damage during operation.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use com-
mon sense when operating a power tool. Do not
use a power tool while you are tired or under the
inuence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in
serious personal injury.
•Always wear eye protection. Use of this tool can
result in foreign objects being blown into eyes,
which can result in eye damage.
•Wear a face or dust mask when working in dust situ-
ations. Dust particles can harm your lungs.
• Use personal protective equipment. Protective equip-
ment such as hearing protection, protective clothing, and
non-skid safety shoes used for appropriate conditions
will reduce personal injuries.
• Dress properly. Do not wear loose clothing or
jewelry. Keep your hair and clothing away from
moving parts. Loose clothes, jewelry or long hair can
be caught in moving parts.
• Do not point tool at self or bystanders. Keep bystand-
ers 50' away during use. Objects may be thrown or
ricochet in all directions.
• Do not let familiarity gained from frequent use of
tools allow you to become complacent and ignore
tool safety principles. A careless action can cause
severe injury within a fraction of a second.
POWER TOOL USE AND CARE
• Use the power tool, accessories, etc. in accordance
with these instructions, taking into account the
working conditions and the work to be performed.
Use of the power tool for operations di󰀨erent from those
intended could result in a hazardous situation.
• Prevent unintentional starting. Ensure the switch
is in the o󰀨-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your nger on the
switch or energizing power tools that have the switch
on invites accidents.
• Use the correct power tool for your application. The
correct power tool will do the job better and safer at the
rate for which it was designed.
• Use only as described in this manual. Use only
manufacturer’s recommended attachments.
• Do not point tool at anything that is burning or
smoking such as cigarettes, matches, or hot ashes.
•To reduce the risk of health hazards from vapors or
dust, do not use tool near tool toxic, carcinogenic
or other hazardous materials such as asbestos,
arsenic, barium, beryllium, lead, pesticides or other
health endangering materials.
•
WARNING
Some dust created by power
sanding, sawing, grinding,
drilling, and other construction activities contains
chemicals known to cause cancer, birth defects or
other reproductive harm. Some examples of these
chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to lter
out microscopic particles.
• Do not use power tool if the switch does not turn it
on and o󰀨. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
•Avoid accidental starting. Ensure the switch is
in the o󰀨-position before inserting battery pack.
Inserting battery packs in tools that have the switch on
invites accidents.
• Do not put hands or objects into openings. Do not
use with any opening blocked; keep free of dust, lint,
hair, and anything else that may reduce air ow.
• Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
• Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage
of parts and any other condition that may a󰀨ect the
power tool’s operation. If damaged, have the power
tool repaired before use. Many accidents are caused
by poorly maintained power tools.
BATTERY PACK USE AND CARE
• Remove the battery pack from the power tool before
making any adjustments, changing accessories,
storing, or any time the power tool is not in use.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
•Turn o󰀨 power tool before removing battery pack.
• Do not handle battery pack, tool, or charger (including
charger plug and terminals) with wet hands.

Produkt Specifikationer

Mærke: Milwaukee
Kategori: Løvblæser
Model: M18 Fuel 2724-21HD

Har du brug for hjælp?

Hvis du har brug for hjælp til Milwaukee M18 Fuel 2724-21HD stil et spørgsmål nedenfor, og andre brugere vil svare dig


Løvblæser Milwaukee Manualer

Milwaukee

Milwaukee M18 Fuel 3017-20 Manual

13 August 2025
Milwaukee

Milwaukee M18 Fuel 2724-20 Manual

12 August 2025
Milwaukee

Milwaukee M18 FUEL F2BL Manual

8 August 2025
Milwaukee

Milwaukee M12 BBL Manual

8 August 2025
Milwaukee

Milwaukee M18 Fuel F2BPB Manual

7 Juli 2025
Milwaukee

Milwaukee M18 Fuel 3017-21HD Manual

3 Januar 2025
Milwaukee

Milwaukee M18 BBL Manual

2 September 2024
Milwaukee

Milwaukee M18 Fuel 2728-21HD Manual

26 Juli 2024
Milwaukee

Milwaukee M18 FBL Manual

24 December 2023
Milwaukee

Milwaukee M18 Fuel 2724-21HD Manual

24 December 2022

Løvblæser Manualer

Nyeste Løvblæser Manualer

Weibang

Weibang INTREPID 80 LVP Manual

13 August 2025
Black Decker

Black Decker BEBLV230 Manual

10 August 2025
Sun Joe

Sun Joe SBJ601E Manual

9 August 2025
Stihl

Stihl BGA 300.0 Manual

9 August 2025
DeWalt

DeWalt DCM572 Manual

8 August 2025
DeWalt

DeWalt DCMBA572 Manual

8 August 2025
Stiga

Stiga BL 300e Manual

8 August 2025
Flymo

Flymo Twister 2500 Manual

3 August 2025
Cecotec

Cecotec AirForce 3300 Crush&Go Manual

3 August 2025
Cecotec

Cecotec AirForce 2in1 MultiFunction Manual

3 August 2025