Minuteman SSL-EMD Manual

Minuteman Luftfugter SSL-EMD

Læs gratis den danske manual til Minuteman SSL-EMD (1 sider) i kategorien Luftfugter. Denne vejledning er vurderet som hjælpsom af 68 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 34.5 anmeldelser. Har du et spørgsmål om Minuteman SSL-EMD, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

SSL-EMD User’s Manual

IMPORTANT: Read all of the instructions before

attempting to install the SSL-EMD device.

DESCRIPTION

The SSL-EMD (Environmental Monitoring Device) is a

connectivity device that allows you to remotely monitor the

temperature, humidity, and status of two contact devices.

Through the SNMP-SSL card, the user can monitor it and

receive notifications of the alarms.

When the SSL-EMD is plugged into the SNMP-SSL card’s

COM port, temperature and humidity readings are

automatically displayed on the SNMP-SSL card’s

“Comprehensive View” page. If enabled, the status of the

external contact device is also displayed on the same page.

APPLICATION

Real-time temperature and humidity monitoring. Monitors the

status of two contact devices to protect your critical

equipments. Can be located 15m away with a straight-through

CAT5 network cable. User selectable alarm thresholds allo

you to define acceptable temperature or humidity limits.

Environmental management and flexible configuration via

Web Browser. Automatic events notification via email and

SNMP Traps. Regularly records SSL-EMD parameters fo

statistical analysis and event diagnostics. Quick and eas

installation (Hot-swappable)

INSTALLATION

Before you install the SSL-EMD, the SNMP-SSL card should

sta

fir

1. Connect the straight-through CAT5 network cable from the

SNMP-SSL card’s RJ45 connector labeled “COM” to the

connector labeled “010101” on the SSL-EMD.

2. Verify that the SNMP-SSL card has a network connection and

is powered on.

3. Check the LED (Power/Status) of SSL-EMD, it will flash ever

5-seconds.

4. Open a Web browser and connect to the SNMP-SSL card.

5. Change the setting of “SSL-EMD Status” from “Disable” to

“Auto” on the EMD Configuration page.

6. Place the SSL-EMD in the desired location.

7. The installation of the SSL-EMD is complete. See the

SNMP-SSL User’s Manual.

LIMITED PRODUCT WARRANTY

Para Systems Inc. (Para Systems) warrants this equipment, when

properly applied and operated within specified conditions, against

faulty materials or workmanship for a period of three years from the

date of original purchase by the end user. For equipment sites within

the United States and Canada, this warranty covers repair o

replacement of defective equipment at the discretion of Para

Systems. Repair will be from the nearest authorized service center.

Replacement parts and warranty labor will be borne by Para Systems.

For equipment located outside of the United States and Canada, Para

Systems only covers faulty parts. Para Systems products repaired

or replaced pursuant to this warranty shall be warranted for the

remaining portion of the warranty that applies to the original product.

This warranty applies only to the original purchaser who must have

properly registered the product within 10 days of purchase.

The warranty shall be void if (a) the equipment is damaged by the

customer, is improperly used, is subjected to an adverse operating

environment, or is operated outside the limits of its electrical

specifications; (b) the equipment is repaired or modified by anyone

other than Para Systems or Para Systems-approved personnel; or (c)

has been used in a manner contrary to the product's operating

manual or other written instructions.

ny technical advice furnished before or after delivery in regard to use

or application of Para Systems’s equipment is furnished without

charge and on the basis that it represents Para Systems’s best

udgment under the circumstances, but it is used at the recipient's

sole risk.

EXCEPT AS PROVIDED HEREIN, PARA SYSTEMS MAKES NO

WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

PARTICULAR PURPOSE. Some states do not permit limitation o

implied warranties; therefore, the aforesaid limitation(s) may not appl

to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL PAR

SYSTEMS BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF

THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE

POSSIBILITY OF SUCH DAMAGE. Specifically, Para Systems is

not liable for any costs, such as lost profits or revenue, loss o

equipment, loss of use of equipment, loss of software, loss of data,

cost of substitutes, claims by third parties, or otherwise. The sole

and exclusive remedy for breach of any warranty, expressed o

implied, concerning Para Systems’s products and the only obligation

of Para Systems hereunder, shall be the repair or replacement o

defective equipment, components, or parts; or, at Para Systems’s

option, refund of the purchase price or substitution with an equivalent

replacement product. This warranty gives you specific legal rights

and you may also have other rights, which vary from state to state.

OBTAINING TECHNICAL ASSISTANCE

Para Systems (Minuteman UPS) Technical Support:

Phone: 1-972-446-7363

Fax: 1-972-446-9011

Web: www.minutemanups.com/support/con_tech2.php

www.minutemanu

s.com © Co

ht 2008 34000362 R1

Produkt Specifikationer

Mærke:	Minuteman
Kategori:	Luftfugter
Model:	SSL-EMD

Har du brug for hjælp?

Hvis du har brug for hjælp til Minuteman SSL-EMD stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Luftfugter Minuteman Manualer

Minuteman SSL-EMD Manual

14 August 2024

Luftfugter Manualer

Nyeste Luftfugter Manualer

Philips 2000 series HU4811 Manual

31 Oktober 2025

Scarlett SC-AH986E28 Manual

10 Oktober 2025

Crane EE-7272 Manual

4 Oktober 2025

Crane EE-5950 Manual

4 Oktober 2025

Crane EE-5953AD Manual

3 Oktober 2025

3 Oktober 2025

3 Oktober 2025

3 Oktober 2025

3 Oktober 2025

ElectriQ DESD9LW Manual

2 Oktober 2025