Miyota JS25 Manual


Læs gratis den danske manual til Miyota JS25 (16 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Miyota JS25, eller vil du spørge andre brugere om produktet?

Side 1/16
UNIVERSAL MASTERPIECE BORN IN JAPAN
MADE IN JAPAN
METAL MOVEMENT
INSTRUCTION MANUAL FOR MIYOTA WATCH MOVEMENT
CALIBRE NO. JS05/15/25
STOPWATCH FUNCTION: SMALL SECOND HAND TIME MEASUREMENT UP TO 29min 59 sec
BATTERY: SR621SW
A) DISPLAYS AND BUTTONS
B) SETTING THE TIME
C) SETTING THE DATE
D) USING THE STOPWATCH
E) STOPWATCH RESET
A) DISPLAYS AND BUTTONS
B) SETTING THE TIME
1. Pull the crown out to the 2nd Click Position.
2. Turn the crown to set hour and minute hands.
3. After the time has been set, push the crown back to the Normal position.
C) SETTING THE DATE
1. Pull the crown out to the 1st Click Position.
2. Turn the crown clockwise to set the date.
* If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may not change on the following day.
3. After the date has been set, push the crown back to the Normal position.
Stopwatch
Minute Hand
Second Hand
Stopwatch
Second Hand
24 Hour Hand
Stopwatch
Minute Hand
Stopwatch
Second Hand
24 Hour Hand
24 Hour Hand
Calendar
Button A
Normal Position
1st Click Position
2nd Click Position
Button B
Second Hand
Second Hand
Stopwatch
Second Hand
Stopwatch
Minute Hand
D) USING THE STOPWATCH
This stopwatch is able to measure and display time in 1/1 second united up to maximum of 30 minutes.
Stopwatch will stop automatically after running continuously for 30 minutes.
[Measuring time with the stopwatch]
1. Press button "A" to start the stopwatch.
2. The stop watch can be started and stopped each time button "A" is pressed.
3. Pressing button "B" resets the stopwatch and stopwatch minute and second hands return to their Zero positions.
E) STOPWATCH RESET (INCL. AFTER REPLACING BATTERY)
This procedure should be performed when the stopwatch second & minute hand does not return to the Zero position.
1. Pull the crown out to the 2nd Click Position.
2. Press the button "A" to set the stopwatch second hand forward.
Press the button "B" to set the stopwatch second hand back.
* The stopwatch minute hand is synchronized with stopwatch second hand.
* The stopwatch second hand can be advanced rapidly by continuously pressing button "A" or "B".
3. Once the both hands been zeroed, reset the time and return the crown to its normal position.
These specifications might be changed without prior notice.
“A” “A” “B”
Time Measurement Stop Reset
“A”


Produkt Specifikationer

Mærke: Miyota
Kategori: Ikke kategoriseret
Model: JS25

Har du brug for hjælp?

Hvis du har brug for hjælp til Miyota JS25 stil et spørgsmål nedenfor, og andre brugere vil svare dig