Moman H3 Manual

Moman Headset H3

Læs gratis den danske manual til Moman H3 (2 sider) i kategorien Headset. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Moman H3, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
MOMAN
① BT Key
② M Key
③ On/Off Key
④ Knob
⑤ Function Key
⑥ Charging Interface
⑦ Headset Interface
⑧ Indicator Light
⑨ Speaker
⑩ Headset Plug
⑪ Butterfly Sticker
⑫ Hard Microphone
⑬ Soft Microphone
Press the On/Off Key for 4 seconds. When you hear voice prompt,
the blue indicator flashes twice.
Press the On/Off Key for 4 seconds. When you hear voice
prompt, the red indicator flashes twice.
(1) In power-off state, long press the On/Off Key for 6 seconds until the red and blue indicator
flashes alternatively.
(2) Turn on Bluetooth function in the phone and search the signal. Choose “ ” and
MOMAN
connect. The voice prompts when it is connected successfully.
※ The distance between intercom and mobile phone should be
within 1 meter.
※ If the intercom has pairing record with the mobile phone, they
will be connected after power on, provided that the Bluetooth is
turned on.
After power on, long press the Function Key and On/Off Key at the
same time for 4 seconds until the red and blue indicator flashes
alternatively. Search Bluetooth signal in the phone and choose to
connect.
※ Method 2 works for group intercom connection or music
sharing.
(1) Long press the On/Off Keys of intercom A & B for 4 seconds and the blue indicators flash
slowly. Long press the BT Keys of intercom A & B for 4 seconds until the blue indicators flash
quickly.
(2) Short press the BT Key of intercom A. When intercom A searches B signal, the blue
indicators flash slowly and you hear “Du”. After one second, the blue indicator of intercom B
flashes quickly to search the next device, and flashes slowly to stop searching. Short press the
BT Key of intercom to send the order and build the network. When your hear “Du”, it means
the network is built. Press the BT Key to start intercom. (When intercom B is searching the next
device, pressing the BT Key of intercom A can stop searching.)
※ When two intercoms are connected successfully, no need to pair repeatedly. After power-
on, pressing BT Key can enter intercom mode.
When two intercoms are connected successfully, pressing the Function Key and On/Off Key
can connect phone by Bluetooth. Press the BT Key of any intercom to intercom.
During intercom, there is automatic reconnect within 10 minutes after disconnection. Also
you can short press the BT Key to manually connect.
During intercom, press the BT Key to disconnect.
(1)Long press the On/Off Key for 4 seconds and the blue indicator flashes slowly. In standby
mode, long press the Function Key and the On/Off Key for 4 seconds until the red and blue
indicator flashes alternatively. Turn on your headphone and make it enter pairing mode. Short
press the Functional Key and On/Off key of H3, and connect them until you hear voice prompt.
(2)When you hear “beep”, the blue indicator flashes slowly, which means the connection is
successful. Press the BT Key again and start to intercom.
Restore factory settings of two intercoms. After pairing intercom A and intercom B
successfully, connect intercom A with phone Bluetooth. Short press the BT Key and play music.
Long press the Function Key for 2 seconds to enter music sharing pairing, with blue indicator
flashing quickly. The intercom B prompts and means sharing is successful.
Randomly long press the Functional Key of intercom A or B.
(1) Long press the On/Off Keys of all intercoms for 4 seconds and the blue indicators flash
slowly. Long press the BT Keys of all intercoms for 4 seconds until the blue indicators flash
quickly.
(2) Short press the BT Key of one intercom (define as NO. 1). NO.1 enters auto-pairing mode.
When it is connected with the other intercom (define as NO. 2), the blue indicators of NO. 1
and NO. 2 flash slowly, which means the connection are successful. After one second, the
blue indicator of NO. 2 flashes quickly, searching the next intercom. When it connects to NO. 3
intercom, the blue indicators of NO. 2 and NO. 3 flash slowly, which means the connection are
successful.
(3) Press the BT Keys of all intercoms (firstly press NO. 1) to create group network. Press the
BT Keys again to begin to intercom.
Notes: After group network is completed, short pressing the On/Off Key will report “The
equipment is No.
✳ ”.
※ Due to using environment and exterior interference, it is recommended to create intercom
group network of 4 users to the most within 1000 meter.
Press the BT Keys to end the intercom. It’s recommended to restore the factory settings for
each machine before pairing. Clear method: In the power on state, press and hold the M Key
and On/Off Key for 6 seconds at the same time.
During music playing, press the M Key and switch EQ Audio mode: “Pop”, “Rock”, “Jazz”,
“Classic” and “Country”.
(1) Under Bluetooth connection mode, press the Function Key to play/pause music.
(2) turn the Knob clockwise.
(3) turn the Knob counterclockwise.
EQ Audio Mode Switching Play / Pause music Next / Previous Music
Specications
First unplug the headset, then press the xed buckle in the middle of the back clip with one
nger (push towards the side of the helmet), so that the back clip hook is detached from
the intercom, and push the intercom upwards to let it slide out of the back clip smoothly to
complete the disassembly.
1. Before using the Bluetooth intercom, please use the attached charging cable to charge
the intercom. The small type-C interface on the charging line is connected to the USB
charging interface of the Bluetooth intercom, and the large USB connector on the charging
cable is connected to the following charging interface for power supply:
A. USB interface of computer;
B. A mobile power supply with DC 5V output;
C. A USB power adapter with DC 5V output.
2. When charging, the red LED is always on, and when fully charged, the red light goes out
slowly. It takes up to 2.5 hours to fully charge the unit.
1. If you do not use intercom for up to one month or more, please charge the intercom once
every two months in order to protect the lithium battery;
2. The storage temperature of this product is -20 ℃ to 50 ℃ , and do not store in the
environment with too high or low temperature, otherwise, the service life of the product will
be aected;
3. Do not expose this product to re to avoid explosion;
4. Do not open other screws to the intercom to avoid short circuit of main board or battery
damage.
5. USB emergency shutdown: during working state, the Bluetooth intercom will power o if
insert USB charging, which will not save any data.
2000m
20m
5.0
A2DP, AVRCP
Type-C
up to 500H
30H
1000mA
2H
5V
40mm
2.4GHz
-20~50℃
press the Function Key
When the phone calls and there is no operation
after 8 seconds, it will answer the call automatically.
press and hole the Function Key for 2 seconds.
press the Function Key.
In standby mode, press the On/Off Key twice to dial the last
call number.
(1) continuously turn the Knob clockwise.
(2) continuously turn the Knob counterclockwise.
※ There is voice alarm for two high or two low volume.
(1) under standby mode, press the Function Key twice to switch
to the FM radio.
(2) quickly rotate the Knob and release to adjust and
select channels. Continuously rotate the Knob to select different channels.
Rotate the Knob continuously to enter volume adjustment.
(3) press the Function Key twice to get back to the previous mode.
※ If the signal is weak indoor, you could try to turn on the FM radio near
window or in the open area.
※ When FM radio is turned on and there is a phone calling, the machine
will cut off FM radio automatically and connect to the mobile phone. It gets
back to the FM radio when the call ends.
In standby state, long press the M Key for 4 seconds to enter Voice Wake up Function.
In power-on state, long press the On/Off key + M Key for 6 seconds until the red indicator is on.
Power off and the memory is clear.
In standby state, long press the M Key for 6 seconds and the voice announces battery, divided
into 3 levels.
Mobile Phone
Intercom
Music/FM Radio
There are 8 languages for choice.
When it is on, press the M Key and rotate the Knob at the same time
to change the language of voice prompt.
① Use the screwdriver to loosen the screws of the back clip so that it can open to a proper
extent.
② Open the helmet liner, insert the clip into the right position on the left side of the helmet and
Separate the hook and loop fasteners. First stick the hook onto the Velcro clip; choose
the right installation position on the helmet and stick the loop to the position. Install the
intercom onto the Velcro clip.
The installation of speakers can refer to the description above.
tighten the screw.
③ Slide the intercom into the back clip slot to make sure it locks firmly.
④ Open the helmet liner (ear position), clean the EPS surface of the helmet, and stick a piece
of horn Velcro on the left and right sides of the helmet.
⑤ Stick the speaker on the fixed Velcro surface and the speaker with short line should be
installed close to the machine. Fix the microphone and arrange the helmet lining and cable.
⑥ Insert the headset into the jack of the intercom and tie up the headset cable.

Produkt Specifikationer

Mærke: Moman
Kategori: Headset
Model: H3

Har du brug for hjælp?

Hvis du har brug for hjælp til Moman H3 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Headset Moman Manualer

Moman

Moman H2 Manual

14 December 2024
Moman

Moman H3 Manual

14 December 2024

Headset Manualer

Nyeste Headset Manualer

Turtle Beach

Turtle Beach Recon 70X Manual

3 Juli 2025
Nacon

Nacon RIG 600 Pro HX Manual

2 Juli 2025
Yealink

Yealink BH72 Manual

30 Juni 2025
Gioteck

Gioteck TX70+ Manual

29 Juni 2025
Havit

Havit H2043U Manual

28 Juni 2025
Defender

Defender Dexter 64595 Manual

28 Juni 2025
Havit

Havit H2002YG Manual

28 Juni 2025
Havit

Havit OWS914 Manual

27 Juni 2025
Havit

Havit TW969 Lite Manual

26 Juni 2025
Cellular Line

Cellular Line Glace Lightning Manual

25 Juni 2025