Moulinex ID5200 Manual


Læs gratis den danske manual til Moulinex ID5200 (8 sider) i kategorien Strygejern. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 13 anmeldelser. Har du et spørgsmål om Moulinex ID5200, eller vil du spørge andre brugere om produktet?

Side 1/8
FOR YOUR SAFETY
This appliance complies with the technical rules and standards
for safety currently in force (Electromagnetic Compatibility,
Low Voltage, Environnement).
This appliance is not designed to be used by children or other
persons unassisted or unattented if their physical, sensory or
mental capacities prevent them from using the appliance in
complete safety. Children should be supervised to ensure that
they do not play with the appliance.
Caution, before plugging in your iron, check that your mains
voltage corresponds to the voltage indicated on the
information panel on the iron. Connecting to the wrong
voltage may cause irreversible damage to the iron and will
invalidate the guarantee.
This iron must always be plugged into an earthed socket. If
using a mains extension lead, ensure that it is correctly rated.
If you use an extension lead, check that it is adapted to the
power indicated on the information panel on the iron.
If the electrical cord becomes damaged, it must be
immediately replaced by an Approved Service Centre to
avoid any danger.
The appliance should not be used if it has fallen, if it has
obvious damage or has functional anomalies. Never
dismantle your appliance : have it inspected by an Approved
Service Centre, so as to avoid any danger.
Never immerse your iron in water !
1
3
4
5
2
DESCRIPTION
ENGLISH
1. Thermostat button
2. Thermostat indicator light
3. Electrical cord
4. Cord tidy heel
5. Soleplate
21448
Notice fer sec 21448 Moulinex:Fer Moulinex 10/10/06 10:35 Page 1
Never leave the appliance unattended when it is connected
to a power source; if it has not cooled down for approximately
1 hour.
Do not unplug your appliance by pulling on the cord. Always
unplug your appliance before cleaning it, after each use.
Your iron should be used and placed on a stable surface.
When you put your iron onto its iron rest, make sure that the
surface on which you put it is stable.
This product has been designed solely for domestic use. Any
inappropriate use or use contrary to the instructions releases
the brand from all responsibility and renders the guarantee
invalid.
USE
ADJUST THE TEMPERATURE
Select the temperature (see table below) setting the
thermostat facing the indicator.
The thermostat light comes on. It will go out when the
soleplate is hot enough.
Your iron heats up quickly : so begin by ironing fabrics that are
ironed at low temperatures first, then go on to those requiring a
higher temperature.
When ironing fabrics with mixed fibres, set the ironing temperature
for the most delicate fibre. For delicate fabrics we recommend
testing the fabric first on an unconspicious place eg (inside the
hem).
It is normal for the indicator light to switch on and off during
ironing. If you turn down the thermostat, wait until the thermo-
stat light comes back on before beginning to iron again.
STORE YOUR IRON
Unplug the iron.
Wait until the soleplate cools down and wind the cord around
the heel of the iron.
Store the cold iron on its heel
Always set your iron on its heel, in order to avoid damage or
scratching to the soleplate. Caution: placing your iron flat
onto a metallic surface might damage or scratch the sole-
plate.
CLEANING THE SOLEPLATE
Unplug the iron, and when the soleplate is just warm, wipe it
with a soft cloth.
Never use abrasive or aggressive products.
Fabric Position of
thermostat cursor
Linen MAX
Cotton •••
Wool ••
Silk
Synthetic
(Polyester, Acetate, Acrylic, Nylon)
STORAGE AND MAINTENANCE
Notice fer sec 21448 Moulinex:Fer Moulinex 10/10/06 10:35 Page 2


Produkt Specifikationer

Mærke: Moulinex
Kategori: Strygejern
Model: ID5200

Har du brug for hjælp?

Hvis du har brug for hjælp til Moulinex ID5200 stil et spørgsmål nedenfor, og andre brugere vil svare dig