Moultrie NXT Hunter Feeder Kit Manual

Moultrie Ikke kategoriseret NXT Hunter Feeder Kit

Læs gratis den danske manual til Moultrie NXT Hunter Feeder Kit (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Moultrie NXT Hunter Feeder Kit, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Instructions for NXT Hunter Feeder Kit

Thank you for your purchase of a Moultrie NXT Hunter Feeder Kit. Please read this sheet before operating

the unit. If you should have any questions about this product or any other Moultrie product, please contact

us using the information on the back of this sheet. Allow us to better serve you by activating your 1-year

warranty online at http://www.moultriefeeders.com/warranty

ATTENTION:

Always position safety switch to OFF position before

performing any maintenance or while setting up feeder

to avoid shock.

OPERATING ELECTRIC VARMINT GUARD

Electric Varmint Guard

There are two wires, one is positive and the other is negative. To maintain

Moultrie’s standard in high battery eciency, the guard is inactive until both

wires are rst touched at the same time. When both wires are touched a

second time, the circuit is completed, creating a shock.

If mounting the Moultrie Quick-Lock Feeder Kit to:

• a Moultrie 30 or 55-gallon barrel* or Moultrie 6.5-gallon bucket, refer to Section C.

• a Moultrie 30-Gallon Quick-Lock Hopper, refer to Section D.

• any other containers, please visit our website at www.moultriefeeders.com

STOP

READ THIS FIRST

BEFORE

PROCEEDING

ADJUSTING FUNNEL HEIGHT

ATTENTION: Make sure the electric varmint guard is turned OFF and

battery is disconnected before adjusting funnel!

Once the funnel is in desired position,

retighten the screw with Phillips-head

screwdriver. Do not over-tighten.

Adjusting the funnel height may be desired when

using dierent types or sizes of feed.

To adjust funnel height:

With a Phillips-head screwdriver,

loosen screw.

With screw loosened, use tabs to position funnel

in one of the two positions by either pushing

down or up depending on desired position.

Safety

Switch

Produkt Specifikationer

Mærke:	Moultrie
Kategori:	Ikke kategoriseret
Model:	NXT Hunter Feeder Kit

Har du brug for hjælp?

Hvis du har brug for hjælp til Moultrie NXT Hunter Feeder Kit stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Moultrie Manualer

Moultrie Edge 2 Pro Manual

7 Oktober 2025

Moultrie Edge 2 Manual

7 Oktober 2025

Moultrie Edge Pro Manual

7 Oktober 2025

Moultrie NXT Hunter Feeder Kit Manual

1 Oktober 2025

Moultrie Pro Magnum Feeder Manual

1 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Dahua Technology DHL32-F600 Manual

28 Oktober 2025

Dahua Technology VTS5240B Manual

28 Oktober 2025

Dahua Technology HAC-HFW1230S-POC Manual

28 Oktober 2025

Dahua Technology HAC-HDW1400TLMQ-A Manual

28 Oktober 2025

Dahua Technology EVS7124D Manual

27 Oktober 2025

Dahua Technology XVR7816S-4KL-X-LP Manual

27 Oktober 2025

Dahua Technology HAC-HDW1220EM Manual

27 Oktober 2025

Dahua Technology ISC-M6550 Manual

27 Oktober 2025

Dahua Technology EVS7148D Manual

27 Oktober 2025

Dahua Technology HAC-HFW2249E-A Manual

27 Oktober 2025