MTX Audio TX2275 Manual


Læs gratis den danske manual til MTX Audio TX2275 (36 sider) i kategorien Bilradio. Denne vejledning er vurderet som hjælpsom af 94 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 47.5 anmeldelser. Har du et spørgsmål om MTX Audio TX2275, eller vil du spørge andre brugere om produktet?

Side 1/36
mtxaudio.eu facebook.com/MTXEuropetwitter.com/MTXEurope
TX2275
2-channel Class-AB Amplifier
660W Peak - 2x75W RMS
Designed by MTX in Phoenix, AZ - USA
TX2450
4-channel Class-AB Amplifier
900W Peak - 4x50W RMS
Settings, Power and Speaker connections :
TX2275 TX2450
Thank you for purchasing an MTX Audio TX2 amplifier. Proper installation matched with MTX speakers and subwoofers provide superior sound
and performance for endless hours of waking the neighbors. Congrats and enjoy the ultimate audio experience with MTX !
Thank You !
Specifications :
• 4-Channel Class-AB wide range amplifier
• CEA2006 certified Power Output :
- 4x75W RMS @2Ω and THD+N ≤1%
- 4x50W RMS @4Ω and THD+N ≤1%
- 2x150W RMS bridged @4Ω and THD+N ≤1%
• Crossover :
- High pass 12dB/oct, variable from 50Hz to 120Hz
- Low pass 12dB/oct, variable from 50Hz to 120Hz
• Signal-to-Noise Ratio (1 Watt) : > 73dB
THD+Noise (Distortion) (1 Watt) : ≤ 0,2%
• Frequency Response (±1dB) : 10Hz-60000Hz
• Maximum Input Signal : 6V
• Maximum Sensitivity : 200mV
• Dimensions : 220x135x52mm
• High level inputs
• Optional EBC remote control (EBC-1)
• 2-channel Class-AB wide range amplifier
• CEA2006 certified Power Output :
- 2x110W RMS @2Ω and THD+N ≤1%
- 2x75W RMS @4Ω and THD+N ≤1%
- 1x220W RMS bridged @4Ω and THD+N ≤1%
• Crossover :
- High pass 12dB/oct, variable from 50Hz to 120Hz
- Low pass 12dB/oct, variable from 50Hz to 120Hz
• Signal-to-Noise Ratio (1 Watt) : > 74dB
THD+Noise (Distortion) (1 Watt) : ≤ 0,18%
• Frequency Response (±1dB) : 10Hz-60000Hz
• Maximum Input Signal : 6V
• Maximum Sensitivity : 200mV
• Dimensions : 180x135x52mm
• High level inputs
• Optional EBC remote control (EBC-1)
RCA Inputs (Input) : These RCA inputs are used with source units that have RCA or Line level outputs. (Source units need a minimum level of
200mV output for proper operation of the amplifier).
MTX recommends only high quality twisted pair cables (such as MTX ZNX) to decrease the possibility of radiated noise entering the system.
Gain Control (Gain) : The gain control matches the input sensitivity of the amplifier to the source unit being used. The operating range varies
from 200mv to 6V.
1
2
TX2275
TX2450
1
1
9
9
5
5
5
3
3
3
11
11
7
7
2
2
2
10
10
6
6
4
4
4
12
12
8
8
USA - UK


Produkt Specifikationer

Mærke: MTX Audio
Kategori: Bilradio
Model: TX2275

Har du brug for hjælp?

Hvis du har brug for hjælp til MTX Audio TX2275 stil et spørgsmål nedenfor, og andre brugere vil svare dig