NAV-TV GVIF-RR NTV-KIT167 Manual

NAV-TV Ikke kategoriseret GVIF-RR NTV-KIT167

Læs gratis den danske manual til NAV-TV GVIF-RR NTV-KIT167 (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 10 anmeldelser. Har du et spørgsmål om NAV-TV GVIF-RR NTV-KIT167, eller vil du spørge andre brugere om produktet?

Side 1/6
BHM
01/07/13
NTV-DOC158
Agreement End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for :
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
1 | P a g e
3950 NW 120th Ave, Coral Springs, FL 33 TEL 561-955-9770 FAX 561-955-9760 065
www.nav-tv.com info@nav-tv.com
GVIF- RR
NTV-KIT 167
Overview
The GVIF- Kit allows the user to add up to 3 video inputs and a backup camera input to the RR
factory media screen in select Range Rover (LR3/HSE) vehicles. This kit has a dedicated rear
view camera input, 3 composite (RCA) audio/video inputs, an RGB input and an AV output with
AV switching.
Kit Contents
AV Input Harness
Power/CAN Harness
LVDS Video cable
GVIF- Interface RR
Remote
RGB Input cable
Input Toggle Switch
IR Eye Harness
BHM
01/07/13
NTV-DOC158
Agreement End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for :
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
2 | P a g e
Interface Connectors
Dip Switch Sengs* Congure prior to installaon
Dip SW:
1
2
3
4
6
7
8
UP
Enables
RGB
Enables
V1
Enables
V2
Enables
V3
Aermarket
NAV
Factory or
no Rev-Cam
N/A
DOWN
Skips
RGB
Skips
V1
Skips
V2
Skips
V3
Factory
NAV
Acvates
aermarket
Rev-Cam
N/A
AV IN/OUT
Power/CAN
Dip Switches
Status LEDs
*Note: If the dip switches are not congured prior to
installaon you must remove power to the unit prior to
making adjustments to the dip switches. When power is
reconnected aer the dip switch adjustment the new
sengs will be stored into memory.
LCD IN/OUT
(LVDS Cable)


Produkt Specifikationer

Mærke: NAV-TV
Kategori: Ikke kategoriseret
Model: GVIF-RR NTV-KIT167

Har du brug for hjælp?

Hvis du har brug for hjælp til NAV-TV GVIF-RR NTV-KIT167 stil et spørgsmål nedenfor, og andre brugere vil svare dig