NAV-TV PCM3-CAM NTV-KIT100 Manual

NAV-TV Ikke kategoriseret PCM3-CAM NTV-KIT100

Læs gratis den danske manual til NAV-TV PCM3-CAM NTV-KIT100 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om NAV-TV PCM3-CAM NTV-KIT100, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

PCM3CAM

NTV-KIT100

Rev 2 BHM 03/18/15

NTV-DOC045

3950 NW 120th Ave Coral Springs,, FL 33432

Tel. 561-955-9770 Fax. 561-955-9760

www.nav-tv.com info@nav-tv.com

PCM3CAM-USB

Front and rear camera interface

Enables a backup camera and a secondary on the factory 2009 and Up Porsche PCM 3.0 Radios

Certain features are intended for passenger and off-road use only. User must obey

all State and Federal regulations

Make sure yo radio looks li ur ke this prior to installation

Kit Contents

1 | P a g e

Filter Harness Description and Diagram

Wire Functions Wire Colors Fig. 2 - Connection plug on Can Filter

1. CAN Hi to Vehicle.

2. CAN Lo to Vehicle

3. Chassis Ground.

4. +12V Output to Camera.

5. CAN Hi to PCM.

6. CAN Lo to PCM.

7. +12V Battery

8. +12V Output to switcher and front Flir IR camera.

1. Yellow

2. Blue

3. Black

4. White/Red

5. Yellow

6. Blue

7. Red

8. White/Blue

8 pin Molex connector

Wire side view

PCM3-CAM Module

NTV-ASY107

Plug & Play Harness

NTV-HAR111

USB Cable (Updates)

NTV-CAB009

VSW-R Harness

NTV-HAR257

VSW-R Trigger

Harness

NTV-HAR066

VSW-R Board

NTV-ASY187

V1 Switcher shown

here, this has been

replaced with the

VSW-R in 03/15

Installation Part 1

1. Insert a soft pry tool into the space between the lower black fascia

piece and the lower side of the dash and gently pry the fascia towards

the rear of the vehicle to release the mounting clips. Follow the fascia

around either clockwise or counterclockwise to release the remainder of

the mounting clips. Set aside the fascia.

2. Remove (4) t20 torx screws from the sides of the

radio and pull the radio gently out of the dash in order

to disconnect all stock cables and antenna

connectors.

3. View of rear of radio and stock radio harness.

Remove the fiber optic connector from the original

harness by gently prying up on the locking tab with a

pick tool.

4. With the fiber unplugged from the factory harness

plug the aftermarket harness into the original harness

and secure it by closing the stock locking tab. Attach

the PCM3CAM module to the aftermarket harness

and secure the filter to the back of the radio cavity with

either double sided tape or Velcro. Fold the harness in

the cavity as shown to allow clearance for the radio.

2 | P a g e

Produkt Specifikationer

Mærke:	NAV-TV
Kategori:	Ikke kategoriseret
Model:	PCM3-CAM NTV-KIT100

Har du brug for hjælp?

Hvis du har brug for hjælp til NAV-TV PCM3-CAM NTV-KIT100 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret NAV-TV Manualer

NAV-TV NTV-KIT736 Manual

18 September 2024

NAV-TV PCM3-CAM NTV-KIT100 Manual

14 August 2024

NAV-TV MOST-AUX NTV-KIT001 Manual

14 August 2024

NAV-TV RGB-LEX+ NTV-KIT062 Manual

14 August 2024

NAV-TV UNI-CAN+ NTV-KIT760 Manual

14 August 2024

NAV-TV MOST-AUX NTV-KIT152 Manual

14 August 2024

NAV-TV MOST-AUX NTV-KIT007 Manual

14 August 2024

NAV-TV GVIF-RR NTV-KIT167 Manual

14 August 2024

NAV-TV MOST-AUX NTV-KIT008 Manual

14 August 2024

NAV-TV MOST-AUX NTV-KIT002 Manual

14 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Advantech UNO-2372G-J1 Manual

16 August 2025

DeWalt DCPS310 Manual

16 August 2025

Vulcan VICM60 Manual

16 August 2025

TP-Link HB610 Manual

16 August 2025

Aiwa IC-300BT Manual

16 August 2025

Biltema 82-3822 Manual

16 August 2025

Alpine KIT-HALO-ID7 Manual

16 August 2025

Biltema 82-3804 Manual

16 August 2025

Advantech AMAX-5570-E2300A Manual

16 August 2025

Alpine APF-D101VW Manual

16 August 2025