NAV-TV Tooki NTV-KIT010 Manual

NAV-TV Ikke kategoriseret Tooki NTV-KIT010

Læs gratis den danske manual til NAV-TV Tooki NTV-KIT010 (7 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 55 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 28 anmeldelser. Har du et spørgsmål om NAV-TV Tooki NTV-KIT010, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/7

What s in the box!

Fig. 1 - Package Contents

1. Tooki module.

2. Plug n Play power harness.! !

3. MOST ﬁber optic cable with connector.

4. Microphone.

5. Fiber optic coupler.

NOTE: Due to differences in

manufacturing, some items may not

appear exactly as pictured.

1 2

3 4

Please inspect the contents of your package to make sure all parts are included, there are no loose wires in

the harness and the ﬁber optic cable isn t kinked, bent or otherwise deformed.(2) (3) !

NOTES:

1) To ensure the most reliable operation, Nav-TV recommends professional installation of our

products.

2) Fiber optic cable is much more fragile and sensitive than normal wire therefore:(3)

a) Make sure your hands are clean when working with the ﬁber.

b) Do not bend or coil the ﬁber excessively.

c) Do not scrape or attempt to strip the orange insulation of the ﬁber.

d) Do not use zip ties or wire ties on ﬁber cable; if you need to keep the excess ﬁber (loosely)

coiled, use tape only.

Tooki Install 2/22/2008

Rev 1

3950 120th NW Ave., Coral Springs, FL 33065

Tel. 561-955-9770 Fax. 561-955-9760

www.nav-tv.com info@nav-tv.com

Tooki Porsche

Bluetooth phone integration for Porsche PCM

Certain features are intended for passenger and off-road use only. User must obey all State and Federal regulations

Installation Instructions

Agreement: End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for misuse of its product.

If you do not agree, please discontinue use immediately and return product to place of purchase.

This product is intended for off-road use and passenger entertainment only.

3) The ﬁber optic coupler is not required for the installation. DO NOT discard it. If the Tooki unit(5)

needs to be removed from the vehicle, then the ﬁber optic bypass must be installed in the place of

the Tooki to maintain the continuity of the MOST ﬁber optic ring.

Close up of Tooki

Fig. 2 - Connections

1. Microphone jack.

2. MOST ﬁber optic connector, with cover.

3. Power connector.

1 2 3

The Nav-TV Tooki module is a very sophisticated piece of equipment. Though the installation is fairly

straightforward, please read the entire manual prior to starting.

BEFORE YOU START: Verify if the vehicle is equipped with the factory phone module. Press

the TEL button on the PCM; if an “Insert SIM card” or “No card” message appears, then the factory

phone module is installed. If that is the case, (a) the factory phone module must be disconnected and

(b) the location of the phone module (under the passenger seat) is an ideal location to install the

Tooki, as it has both the ﬁber optic connection and a power connection.

NOTE: Even if the Tooki will not be mounted in the factory phone location, the factory phone

module still needs to be disconnected and the coupler/bypass will need to be used.. (5)

Therefore, NAV-TV recommends that location for mounting the Tooki.