NEC MultiSync X841UHD SST Manual

NEC overvåge MultiSync X841UHD SST

Læs gratis den danske manual til NEC MultiSync X841UHD SST (10 sider) i kategorien overvåge. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om NEC MultiSync X841UHD SST, eller vil du spørge andre brugere om produktet?

Side 1/10
User’s Manual ShadowSense Touch
MultiSync® E705 SST
MultiSync® E805 SST
MultiSync® E905 SST
MultiSync® P403 SST
MultiSync® P463 SST
MultiSync® P553 SST
MultiSync® P703 SST
MultiSync® P801 SST
MultiSync® X651UHD SST
MultiSync® X841UHD SST
MultiSync® X981UHD SST
2 © NEC Corporation 2015
For using Touch Panel
1. Turn off the monitor.
2. Install the equipment.*1
- Using slot 2 type PC (OPS):
Connect the slot 2 type PC into the option board slot. Connect the B type
connector to the USB upstream port on the left back side of the monitor and
the A type connector to the downstream port on the slot 2 type PC.
NOTE: Please refer to the slot 2 type PC’s manual for connection.
NOTE: When you set option board accessory other than slot 2 type
PC, touch function may not work.
- Using external computer:
Connect the B type connector to the USB upstream port on the left back side of
the monitor and the A type connector to the downstream port on the external
computer (Figure 1).
NOTE: On all ShadowSense touch displays from 40 up to 80”, the USB
connector type B is located on the left back side of the monitor, above the OPS
slot. (Figure 2)
NOTE: On all ShadowSense touch displays from 84” up to 98”, the USB
connector is located on the bottom of the right back side of the monitor.
(Figure 3)
Figure 1: Figure 2:


Produkt Specifikationer

Mærke: NEC
Kategori: overvåge
Model: MultiSync X841UHD SST

Har du brug for hjælp?

Hvis du har brug for hjælp til NEC MultiSync X841UHD SST stil et spørgsmål nedenfor, og andre brugere vil svare dig




overvåge NEC Manualer

overvåge Manualer

Nyeste overvåge Manualer