Nedis SEST201BK Manual

Nedis Ikke kategoriseret SEST201BK

Læs gratis den danske manual til Nedis SEST201BK (20 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 7 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 4 anmeldelser. Har du et spørgsmål om Nedis SEST201BK, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/20

Quick start guide

Sele Stick

SEST201BK

For more information see the extended

manual online: ned.is/sest201bk

Intended use

The SEST201BK is a smartphone holder that allows

you to take seles from a greater distance.

The product is not intended for professional use.

Any modication of the product may have

consequences for safety, warranty and proper

functioning.

Specications

Product Sele Stick

Article number SEST201BK

Dimensions (l x w x h) 105 x 28.8 x 28.8 mm (folded)

Max. length 480 mm

Smartphone holder

width

60 – 88 mm

Weight 81 g

Input power 3.0 V

Current 120 mAh

FM frequency 2402 - 2480 MHz

Antenna gain 0.5 dBi

Transmission power -6 - 4 dBm

Built-in wireless

shutter

Yes

Material Aluminium Alloy and ABS

Battery type Lithium button cell CR1632

(included)

Main parts (image A)

1 Smartphone holder

2 Telescopic rod

3 Status indicator LED

4 Photo button

5 Battery compartment

Safety instructions

WARNING

• Always keep button cell batteries, both full and

empty, out of reach of children to avoid the

chance of swallowing. Dispose of used batteries

immediately and safely. Button cell batteries can

cause serious internal chemical burns in as little

as two hours when swallowed. Keep in mind that

the rst symptoms may look like child diseases

like coughing or drooling. Seek immediate

medical attention when you suspect that

batteries have been swallowed.

• Ensure you have fully read and understood the

instructions in this document before you install

or use the product. Keep the packaging and this

document for future reference.

• Only use the product as described in this

document.

• Do not use the product if a part is damaged or

defective. Replace a damaged or defective

product immediately.

• Do not drop the product and avoid bumping.

• This product may only be serviced by a qualied

technician for maintenance to reduce the risk of

electric shock.

• Do not expose the product to water or moisture.

• Do not dismantle, open or shred batteries.

• Do not expose batteries to heat or re. Avoid

storage in direct sunlight.

• Do not short-circuit a battery.

• Do not store cells or batteries haphazardly in a

box or drawer where they may short-circuit each

other or be short-circuited by other metal

objects.

• Do not subject cells or batteries to mechanical

shock.

• In the event of a cell leaking, do not allow the

liquid to come in contact with the skin or eyes. If

contact has been made, wash the aected area

with copious amounts of water and seek medical

advice.

• Only use the battery type(s) recommended in

this document.

• Keep cells and batteries clean and dry.

• Wipe the cell or battery terminals with a clean

dry cloth if they become dirty.

• Do not remove a battery from its original

packaging until required for use.

• Retain the original product literature for future

reference.

• When possible, remove the battery from the

product when not in use.

• Observe the plus (+) and minus (–) marks on the

cell, battery and equipment and ensure correct

use.

• Dispose of the cell or battery properly.

Bluetooth pairing

1. Press and hold the photo button A

for 2

seconds.

The status indicator LED A

blinks to indicate the

product is in pairing mode.

2. Enable Bluetooth on the device you want to pair

the product with.

3. Select "SEST201BK" from the list of available

Bluetooth devices on your device.

lights up green when pairing is successful.

Using the product

1. Place your smartphone into the smartphone

holder A

2. Press A

to take a picture.

3. Press and hold A

for 3 seconds to switch o

the product.

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that

the product SEST201BK from our brand Nedis

produced in China, has been tested according

to all relevant CE standards and regulations and

that all tests have been passed successfully. This

includes, but is not limited to the RED 2014/53/EU

regulation.

The complete Declaration of Conformity (and the

safety datasheet if applicable) can be found and

downloaded via:

nedis.com/sest201bk#support

For additional information regarding the

compliance, contact the customer service:

Web: www.nedis.com

E-mail: service@nedis.com

Nedis B.V., de Tweeling 28

5215 MC ’s-Hertogenbosch, the Netherlands

Produkt Specifikationer

Mærke:	Nedis
Kategori:	Ikke kategoriseret
Model:	SEST201BK
Velegnet til:	Smartphone
Produktfarve:	Sort
Batterispænding:	3 V
Bluetooth:	Ja
Antal:	1
Pakketype:	Hængende boks
Batterier inkluderet:	Ja
Materiale:	Acrylonitrile Butadiene Styrene (ABS), Aluminium
Batteritype:	CR1632
Mærke kompatibilitet:	Alle mærker
Maksimal vægtkapacitet:	0.4 kg
Teleskopisk:	Ja
Længde (maks):	1800 mm
Foldet længde:	150 mm
Batteristrøm:	0.12 A
Udløserknap:	Ja