Netgear PA101 Manual

Netgear Telefon PA101

Læs gratis den danske manual til Netgear PA101 (2 sider) i kategorien Telefon. Denne vejledning er vurderet som hjælpsom af 52 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 26.5 anmeldelser. Har du et spørgsmål om Netgear PA101, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
PC*
Phone line behind the wall
RJ-11
connectors
PC with network
card installed
Telephone
(optional)
PA101 Phoneline10X USB adapter
Cable/ADSL
modem
*PC with FA310 Ethernet PCI card installed to interface
with the Cable or ADSL modem
START HERE
This guide provides instructions to install the Model PA101
Phoneline10X USB Adapter, using Windows®98.
The following six easy steps are provided in this guide for installing
your Phoneline10X USB Adapter:
1. Verify Package Contents
2. Install the Model PA101 Phoneline10X USB Adapter
3. Connect the Telephone Cables
4. Install the Network Driver
5. Install the FirstGear Software
6. Access the Network Printer
As a final step, be sure to register your NETGEAR™product at the
www.NETGEAR.com address.
VERIFY PACKAGE CONTENTS
Unpack the package contents and verify that you have the following:
Verify PC Requirements
The instructions given in this guide are for using the Phoneline10X
USB Adapter in a PC that has Microsoft®Windows 98.
INSTALL THE ADAPTER
To install the Phoneline10X USB Adapter:
1. Insert the Phoneline10X USB Adapter into the USB
(universal serial bus) as shown in the illustration.
Some PCs have two USB ports.The Phoneline10X USB
Adapter can be inserted into either port.
2. Turn on power to the PC, if you have chosen to install the
adapter with the power turned off.
CONNECT THE TELEPHONE CABLES
Using the telephone cable provided in the NETGEAR package,
connect one end of the telephone cable to the port labeled
“WALL”on the adapter and the other end of the cable to an
available wall jack, as illustrated above.
Using the cable shipped with your telephone or modem, connect
that cable to the port labeled “PHONE”on the adapter.
For External Modem
If you are using an external analog modem to connect to the
Internet, refer to the following illustration that shows the connec-
tions for the wall jack, Phoneline10X USB Adapter, external
modem, and phone. Note that the captions on the USB adapter,
and modem direct you to the outlets where you connect
the cables.
For Internal Modem
The illustration below depicts the configuration with an internal
modem and shows a closeup of the connections for the wall jack,
modem adapter, Phoneline10X USB Adapter, and phone. Note that
the caption on the modem adapter and USB adapter direct you to
the outlets where you connect the cable from the wall jack and the
cable that connects to the phone.
Note: For optimal performance, the Phoneline10X USB
Adapter should be plugged directly into a wall jack, and the
modem should be plugged directly into the USB adapter.
For Cable or ADSL Modem
If you are using a cable or ADSL modem to connect to the Internet,
refer to the following illustration that shows the connections for
the wall jack, Phoneline 10X USB Adapter, and the cable/ADSL
modem. Note the captions on the USB adapter direct you to the
outlets where you connect the cables.
INSTALL THE NETWORK DRIVER
This guide provides instructions for installing the Windows
Network Driver.The steps given are for users of Windows 98.
However, because all versions of Windows 98 might not respond
the same, windows that are different from those shown in these
instructions might open but prompt you for the same information,
or windows might open in a different order than shown in these
instructions.
Note: You must install the USB adapter before installing
the network driver.You need to have the Windows 98 CD and
the NETGEAR Phoneline10X Resource CD ready to use in
the installation process.
If you have not yet named your PC and your network, before you
proceed with the installation steps, decide on a name for your
network and for each PC.You will be using these names in the
section, “Install the FirstGear Software.”
Note: If the Insert CD window opens and the “Please insert
the CD labeled Windows message appears at any time during”
the installation process, insert the Windows CD and click
OK.Then proceed with the following steps.
To install the network driver:
1. Turn on the power to the computer to start Windows 98,
if you have chosen to install the adapter with the power
turned off.
Click Next to continue.
2.
Select “Search for best driver for your device”.
Click Next to continue.
3.
Insert the NETGEAR Phoneline10X Resource CD.
Make sure the CD Rom drive check box is selected and
click Next.
4.
Windows is now ready to load the drivers. Click Next to start
copying the drivers.
5.
Click Finish. It may take several minutes for the operating
system to complete the driver installation.
6.
Click Yes to restart the computer. If the System Settings
Change window does not open, restart your PC by using the
Start menu; select Shut down, click Restart your computer,
and then click Yes.
10X
Phoneline Home Network
U S B A D A P T E R
Installation Guide
™
N E T G E A R
NETGEAR, Inc.
4401 Great America Parkway
Santa Clara, CA 95054 USA
Phone: 888-NETGEAR
http://WWW.NETGEAR.com
™
N E T G E A R
Phoneline10X USB Adapter
Telephone cable (10ft)
Resource CD
Installation Guide
Phoneline10X
USB Adapter
Phone
Telephone
wall jack PC
Telephone wire
Serial cable PhoneExternal modem
Telephone
wall jack
Phoneline10X USB adapter
PC with internal modem
USB Port
PC with PA101 Phoneline10X
USB adapter installed
Phone line
behind the wall
RJ-11
connectors
PA101 Phoneline 10X
USB adapter
Printer (optional)
Telephone
(optional)
Laptop
PA101QCard_eng_r2.qxd4 12/15/00 12:59 PM Page 1

Produkt Specifikationer

Mærke: Netgear
Kategori: Telefon
Model: PA101

Har du brug for hjælp?

Hvis du har brug for hjælp til Netgear PA101 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Telefon Netgear Manualer

Netgear

Netgear PA101 Manual

20 September 2024
Netgear

Netgear PA301 Manual

20 April 2023

Telefon Manualer

Nyeste Telefon Manualer

Unify

Unify OpenStage M3 handsets Manual

18 Oktober 2025
Unify

Unify OpenStage 10T Manual

18 Oktober 2025
Swissvoice

Swissvoice Avena 479 Manual

13 Oktober 2025
Swissvoice

Swissvoice Eurit 67 Manual

13 Oktober 2025
Motorola

Motorola Moto G24 Power Manual

12 Oktober 2025
Axis

Axis C1210-E Manual

12 Oktober 2025
Aastra

Aastra A6735-0131-1055 Manual

9 Oktober 2025
Vtech

Vtech LS6001 Manual

4 Oktober 2025
Realme

Realme GT2 Manual

4 Oktober 2025
Vtech

Vtech CS6419-2 Manual

4 Oktober 2025