1
LED 18" WRAP FIXTURE
WITH DUAL GFCIS
Models: 62-700
INSTALLATION
External Wiring Method
STEP 1: Turn OFF power supply before installation.
STEP 2: Remove diffuser from housing. Near one end of
housing, grasp edge of diffuser and carefully squeeze to
release diffuser from housing. Continue down length of
diffuser to fully disengage.
INSTALLATION AND SAFETY INSTRUCTIONS
IMPORTANT: Read before installing xture. Retain for future reference.
Satco Products, Inc.
Brentwood, NY 11717© Copyright 2024 Satco Products, Inc. 5/24 v2.0
WARNING: Risk of Fire or Electric Shock
• LED xture installation requires knowledge of luminaries’
electrical systems. If not qualied, do not attempt installation.
Contact a qualied electrician.
• To reduce risk of re and over-heating, secure all connections.
• TURN OFF the electrical power before proceeding.
• The electrical rating of this product is 120V 50/60Hz.
• To prevent wiring damage or abrasion, do not expose wiring
to edges of sheet metal or other sharp objects.
• Do not make or alter any open holes in an enclosure of wiring
or electrical components during installation.
• Not intended for recessed installation in ceilings or softs.
• For indoor or damp location.
• This product must be installed in accordance with the owner’s
manual, current electrical codes and/or the current National
Electric Code (NEC).
WARRANTY: This product is guaranteed for a 5-year warranty.
Any quality issue in normal use within the warranty period, will
be repaired or replaced according to the situation and under the
condition specications can be provided. Visit www.Satco.com
for full warranty details and dimmer compatibility information.
Part Description Quantity
LED Module 1
GFCI Socket 1
Modulator Body 1
Machine Screw 2
Drywall Anchor 2
Wood Screw 2
Wire Nuts 3
5CCT Switch 1
LED Driver 1
18" L x 2 1/5" W x 4 7/16" D
(458mm) x (64mm) x (113mm)
STEP 3: Remove xture components and parts.
Check that all parts are included.
STEP 4: Thread two machine screws into junction
box (NOTE: screws must be the same distance apart
as keyholes in back of housing assembly).
