NUVO Bento 60/4091 Manual

NUVO lampe Bento 60/4091

Læs gratis den danske manual til NUVO Bento 60/4091 (2 sider) i kategorien lampe. Denne vejledning er vurderet som hjælpsom af 7 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 4 anmeldelser. Har du et spørgsmål om NUVO Bento 60/4091, eller vil du spørge andre brugere om produktet?

Side 1/2
ASSEMBLY INSTRUCTION
SKU#60/4 091
NOTE: Please consult a qualied electrician if you are not certain of the installation or service.
CAUTION: Before starting the installation or service, disconnect the power by turning off the circuit
breaker or by removing the fuse at the fuse box.
1. Carefully unpack the xture, lay out all parts on a clean surface.
2. Fasten the mounting ring onto the outlet box by using provided 2 outlet box screws.
3. Place the nipples D through the canopy, place the washer A and washer B onto the nipple D, then using
4. Screw the nipple A into the bushing, screw nipple B into the tube A, screw the nipple C into the tube B.
5. Tie ground wire from outlet box and from xture to the ground screw on the mounting strap. Connect
white wire from xture to white wire (neutral wire) from supply circuit. Connect black wire from
xture to black wire (live wire) from supply circuit. Cover connections using provided wire
connectors.
6. ace the canopy to the outlet box by aligning the protruding mounting screws all the way through the Pl
canopy and tighten the xture using lock nuts provided until xture body is held rmly.
7. Unscrew the socket rings and covers from the sockets. Place the shades and socket covers over the
sockets, refasten the socket rings to secure them.
8. Install the bulb (Not included). Turn on the power.
A Satco Product


Produkt Specifikationer

Mærke: NUVO
Kategori: lampe
Model: Bento 60/4091

Har du brug for hjælp?

Hvis du har brug for hjælp til NUVO Bento 60/4091 stil et spørgsmål nedenfor, og andre brugere vil svare dig