Olympia WSL 10 Manual


Læs gratis den danske manual til Olympia WSL 10 (4 sider) i kategorien Overvågningskamera. Denne vejledning er vurderet som hjælpsom af 54 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 27.5 anmeldelser. Har du et spørgsmål om Olympia WSL 10, eller vil du spørge andre brugere om produktet?

Side 1/4
Installation
1 Close the window or French window and determine the assembly
position (see Figure 2).
2 Turn the latch (A) of the additional locking device (see Figure 3) and
remove the caps (C).
3 Position the mounting block (B) on the window frame(F). When
doing so, pay attention that there is 2 mm distance between the
window casement (D) and mounting block (B). The 2 mm spacer
plate (H) supplied can be used as an aid to determine the distance.
4 Mark the 4 drill holes for the retaining screws (E).
5 Then drill the holes using a drill bit with 3 mm Ø and screw the
mounting block (B) rmly to the window frame (F) using the self-tap -
ping screws (E).
6 To ensure that the latch (A) does not scrape over the window case-
ment when locking and unlocking, it may be necessary to use the
spacer plates (H) supplied to adjust the height.
7 Finally, press the 2 caps (C) back on the recesses in the retaining
screws (E).
Operation
1 To lock the window or French window, turn the latch (A) until it
engages.
2 To unlock it, press and hold the knob (G) in and turn the latch (A)
back again.
Figure 1: Overview, locked position
WSL 10 single-leaf Figure 2: Recommended
assembly position
Figure 3: Assembly of the
mounting block
Manufacturer Information:
Olympia Business Systems Vertriebs GmbH
Zum Kraftwerk 1 | 45527 Hattingen | Germany
Assembly Manual
WSL10
WSL20
Additional Window and French Window Lock
WSL 20 double-leaf


Produkt Specifikationer

Mærke: Olympia
Kategori: Overvågningskamera
Model: WSL 10

Har du brug for hjælp?

Hvis du har brug for hjælp til Olympia WSL 10 stil et spørgsmål nedenfor, og andre brugere vil svare dig