One For All SV 9602 Manual

One For All TV signal booster SV 9602

Læs gratis den danske manual til One For All SV 9602 (2 sider) i kategorien TV signal booster. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 12 anmeldelser. Har du et spørgsmål om One For All SV 9602, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
SV9602
Instruction Manual
English
Universal Electronics BV
Europe & International
P.O. Box 3332
7500 DH, Enschede
The Netherlands
SV 9602
709665
RDN-1061017
Guarantee English UNIVERSAL ELECTRONICS / ONE FOR ALL warrants to the original purchaser that this product will
be free from defects in materials and workmanship under normal and correct use for a period of one (1) year from the
date of original purchase. This product will be repaired or if necessary replaced free of charge if it has been proven to be
defective within the one (1) year warranty period. The forwarding costs are on the account of the owner; the costs of
returning the product are on the account of UNIVERSAL ELECTRONICS / ONE FOR ALL.
This warranty does not cover damage or failures caused by products or services not supplied by UNIVERSAL
ELECTRONICS / ONE FOR ALL, or which result from not mounting the product according to manual instructions. This also
applies when the product has been modified / repaired by others than UNIVERSAL ELECTRONICS / ONE FOR ALL or if a
fault is the result from accident, misuse, abuse, neglect, mishandling, misapplication, faulty installation, improper
maintenance, alteration, modifications, fire, water, lightning, natural disasters, wrong use or carelessness.
To obtain warranty service during the warranty period, please notice that we need your original purchase receipt so that
we may establish your eligibility for service. If you have bought this product for purposes which are not related to your
trade, business or profession, please remind that you may have legal rights under your national legislation governing
the sale of consumer goods. This guarantee does not affect those rights.
Official NOTE:
- Where the MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable. In English
this means; For safety reasons, please ensure that the power plug (to mains) is easily accessible (not blocked or
covered) so it can be used to disconnect the device.
- Please ensure a minimum distance of 5 cm around the apparatus for sufficient ventilation.
- Please ensure that the ventilation is not impeded by covering the ventilation openings with items such as newspapers,
tablecloths, curtains, etc.
- Do not place near naked flame sources, such as lighted candles.
- To reduce the risk of fire or electric shocks do not expose this apparatus to rain or moisture, dripping or splashing.
- Use the apparatus only in moderate climates (not in tropical climates).
We’re ready to assist with the installation
Learn about One For All products, download manuals, watch instruction videos or get in tacon ct
with our Customer vice Team for personal assistanSer ce.
Support
www.oneforall.com Support Chat FAQ
@
Email
SV_9602_update okt 2017_Opmaak 1 04-10-17 16:51 Pagina 1
THANK YOU
Thank you for purchasing the ONE FOR ALL Signal Amplifier. ONE FOR ALL continuously
strives to develop, produce and market high-quality innovative products to meet your needs.
We hope this Signal Amplifier will give you total satisfaction.
THE PRODUCT
The ONE FOR ALL Signal Amplifier is designed to boost the signal of your cable box, this
allows you to distribute the signal to multiple devices and/or use longer cables without
losing picture and sound quality.
Below you’ll find the description of your ONE FOR ALL Signal Amplifier (see picture 1).
A. Power adapter (power plug)
B. Power adapter input
C. Signal input
D. Signal outputs
E. LED indicator (ON / OFF)
F. Holes for wall mounting
G. Space for foam feet
CONNECTING THE SIGNAL AMPLIFIER
To connect your ONE FOR ALL Signal Amplifier, please follow the steps below:
• Stick the foam feet at the bottom of the ONE FOR ALL Signal Amplifier (G).
• Connect your TV(s) or other devices to the signal outputs (D 1-2)
• Connect your cable TV coaxial cable or other device (see picture 2) to the input (C) on
the ONE FOR ALL Signal Amplifier.
• Plug the power adapter to the input (B) on the ONE FOR ALL Signal Amplifier.
• Plug the power adapter into the mains (A).
• Check if the LED indicator illuminates (H).
Wall mount installation
• You can use the holes at the back of the ONE FOR ALL Signal Amplifier for wall mount
installation (F).
Examples of different situations (pictures 2 – 5):
A coaxial cable for your cable TV (DVB-C / DVB-C2) is connected to the input (IN) of the
ONE FOR ALL Signal Amplifier. The signal will be boosted and distributed to (up to) 2 TVs
or other devices.
The coaxial output of a TV receiver (DVB-C / DVB-C2) is connected
to the input (IN) of the ONE FOR ALL Signal Amplifier. The signal will be boosted
and distributed to (up to) 2 TVs or other devices.
A coaxial cable for your cable TV (DVB-C / DVB-C2) is connected to the coaxial input of a
TV receiver, which is connected to the HDD / DVD recorder. The coaxial output of the
HDD / DVD recorder is connected with the input (IN) of the ONE FOR ALL Signal
Amplifier. The signal will be boosted and distributed to (up to) 2 TVs or other devices.
The FM is connected to the input (IN) of the ONE FOR ALL Signal Amplifier which will
boost the signal and distribute it to (up to) 2 radio tuners.
(*) It may be possible that you have to use inline coax-connectors to make the connections.
(See picture).
HELPFUL HINTS
If the picture or sound quality is unsatisfying, please follow the helpful hints below:
• If the incoming signal is unclear, the ONE FOR ALL Signal Amplifier will not improve
your picture as it will also amplify the noise in the signal. Please contact your cable TV
installer for further details.
• Check all the connections. Loose or bad connections will result in an unclear picture.
*
2
HDD / DVD
recorder STB
STB
5
4
3
B
G
C
D D1 2
E
F F
G
1
TV TV1 2
TV TV1 2
TV1TV2
Radio Radio1 2
A
1
2
3
4
5
SV_9602_update okt 2017_Opmaak 1 04-10-17 16:51 Pagina 2

Produkt Specifikationer

Mærke: One For All
Kategori: TV signal booster
Model: SV 9602

Har du brug for hjælp?

Hvis du har brug for hjælp til One For All SV 9602 stil et spørgsmål nedenfor, og andre brugere vil svare dig


TV signal booster One For All Manualer

One For All

One For All SV 9602 Manual

3 August 2024
One For All

One For All SV 9640 Manual

20 Juli 2024

TV signal booster Manualer

Nyeste TV signal booster Manualer

Wilson

Wilson weBoost Drive X RV Manual

26 December 2024
Wilson

Wilson weBoost Drive Reach Fleet Manual

26 December 2024
Wilson

Wilson weBoost Drive 4G-X RV Manual

26 December 2024
Wilson

Wilson weBoost Home 4G Manual

26 December 2024
Wilson

Wilson weBoost Drive Reach RV Manual

26 December 2024
Wilson

Wilson weBoost Home Studio Manual

26 December 2024
Wilson

Wilson Weboost Drive Reach OTR Manual

26 December 2024
Wilson

Wilson WeBoost RV Antenna Manual

26 December 2024
Wilson

Wilson weBoost Signal 4G Manual

26 December 2024
Wilson

Wilson PRO 1100 Manual

26 December 2024