Optex VXI-ST Manual

Optex Bevægelsesdetektor VXI-ST

Læs gratis den danske manual til Optex VXI-ST (3 sider) i kategorien Bevægelsesdetektor. Denne vejledning er vurderet som hjælpsom af 71 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 36 anmeldelser. Har du et spørgsmål om Optex VXI-ST, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

SPECIFICATIONS

Detection method

PIR coverage

PIR distance limit

Detectable speed

Sensitivity

Power input

Current draw

Alarm period

Warm-up period

Alarm output

Trouble output

Tamper output

LED indicator

RF interference

Operating temperature

Environment humidity

International protection

Mounting

Mounting height

Weight

Accessories

* Specifications and design are subject to change without prior notice.

Model VXI-R VXI-RAM VXI-RDAM

12.0 m (40 ft) wide / 16 zones

12 - 2.5 m (5 levels)

0.3 – 1.5 m/s (1 - 5 ft/s)

2.0°C (3.6°F) at 0.6 m/s (2 ft/s)

3 – 9 V DC(Lithium or Alkaline Battery)

10μA (standby) / 4 mA (max)

at 3 V DC

2.0 ±1 sec.

Approx. 60 sec. (LED blinks)

N.C. / N.O. Selectable-Solid State Switch 10 V DC 0.01 A (max)

No alarm 10 V/m

95% max.

IP55

Wall, Pole (Outdoor, Indoor)

0.8 – 1.2 m (2.64 ft – 3'94 ft)

Connector for POWER and ALARM, Connector for TROUBLE, Screw (4×20mm) ×2, Masking seal ×3

Detection method

PIR coverage

PIR distance limit

Detectable speed

Sensitivity

Power input

Current draw

Alarm period

Warm-up period

Alarm output

Trouble output

LED indicator

RF interference

Operating temperature

Environment humidity

International protection

Mounting

Mounting height

Weight

Accessories

Passive infrared

Disable: During normal operation.

Enable: During WALK TEST or LED SW on.

Red: Warm-up, alarm, masking detection (VXI-RAM only)

-20 – +60°C (-4 – +140°F)

500 g (17.7 oz.)

9μA (standby) / 4 mA (max)

at 3 V DC

Passive infrared & Microwave

18μA (standby) / 8 mA (max)

at 3 V DC

Disable: During normal operation.

Enable: During WALK TEST or LED SW on.

Red: Warm-up, alarm, masking detection.

Yellow: Warm-up, MW detect.

-20 – +45°C (-4 – +113°F)

600 g (21.2 oz.)

12.0 m (40 ft) 90° wide / 16 zones

12 - 2.5 m (5 levels)

0.3 – 1.5 m/s (1 - 5 ft/s)

2.0°C (3.6°F) at 0.6 m/s (2 ft/s)

9.5 – 18 V DC

24 mA (max) at 12 V DC

2.0 ±1 sec.

Approx. 60 sec. (LED blinks)

N.C. / N.O. Selectable 28 V DC 0.1 A (max)

N.C. 28 V DC 0.1 A (max) open when cover removed.

No alarm 10 V/m

95% max.

IP55

Wall, Pole (Outdoor, Indoor)

0.8 – 1.2 m (2.64 ft – 3'94 ft)

Screw (4×20 mm) ×2 , Wiring sponge ×3 , Masking seal ×3

Passive infrared

Red: Warm-up, alarm,

masking detection (VXI-AM only)

-30 – +60°C (-22 – +140°F)

500 g (17.7 oz.)

N.C. 28 V DC 0.1 A (max)

20 mA (max) at 12 V DC

Model VXI-ST VXI-AM VXI-DAM

Unit:mm(inch)

The actual detection

distance is dependent

on the thermal conditions

within the given environment.

SIDE VIEW (Detection Distance by Positions)

Position 1 : Approx. 12m/40ft (Default)

0 5m 10m 12m

Position 2 : Approx. 8.5m/27.9ft

0 5m 10m 12m

Position 3 : Approx. 6.0m/19.7ft

0 5m 10m 12m

Position 4 : Approx. 3.5m/11.5ft

0 5m 10m 12m

Position 5 : Approx. 2.5m/8.2ft

0 5m 10m 12m

TOP VIEW

(Area diagram for D position)

12m

10m

12m 12m10m 10m5m 5m0

fg h i

d k

PIR

ABC E FG

185.9

(7.32)

105.5(4.15 ) Pitch=83.5

(3.29)

DETECTION AREA DIMENSIONS

T E L :

Tech:

URL:

+1-909-993-5770

(800 )966-7839

http://www.optexamerica.com/

OPTEX INCORPORATED (USA)

T E L :

URL:

+55-11-2225-0934

http://www.optexdobrasil.com.br/

OPTEX DO BRASIL LTDA.

T E L :

URL:

+91-124-4035704

http://www.optex.net/in/

OPTEX PINNACLE INDIA PRIVATE LIMITED

T E L :

URL:

+82-2-719-5971

http://www.optexkorea.com/

OPTEX KOREA CO., LTD. (KOREA)

OPTEX (DONGGUAN) CO., LTD. SHANGHAI OFFICE (CHINA)

T E L :

URL:

+86-21-34600673

http://www.optexchina.com/

T E L :

URL:

+44-1628-631000

http://www.optex-europe.com/

OPTEX (EUROPE) LTD. (UK)

T E L :

URL:

+33-437-55-50-50

http://www.optex-security.com/

OPTEX SECURITY SAS (FRANCE)

T E L :

URL:

+48-22-598-06-55

http://www.optex.com.pl/

OPTEX SECURITY Sp.z o.o. (POLAND)

5-8-12 Ogoto Otsu Shiga 520-0101 JAPAN

T E L :

URL:

+81-77-579-8670

http://www.optex.co.jp/e/

OPTEX CO., LTD. (JAPAN)

No. 77040-00-15747-1306

Passive infrared & Microwave

35 mA (max) at 12 V DC

Red: Warm-up, alarm,

masking detection.

Yellow: Warm-up, MW detect.

-20 – +45°C (-4 – +113°F)

600 g (21.2 oz.)

VXI-T-Bracket BATTERY BOX (RBB-01)

*Battery not included.

Wall Tamper (WRS-04)

for R, RAM, RDAM models

Different values of EOL resistances can be instantly set by

plugging in optional modules. Please refer to the relevant

control panels manual to confirm matching resistance values.

Plug in EOL(End of line) Resistor Modules

CR123A x 3(3.0VDC)

CR2 x 3(3.0VDC)

1/2AA x 3(3.6VDC)

1/2AA x 6

(7.2VDC x 3)*

*3.6 VDC 1/2 AA battery in series.

Alarm: 2.2kΩ / Tamper: 4.7kΩ / Trouble: 2.2kΩ

PEU-A(PACK)

Alarm: 4.7kΩ / Tamper: 4.7kΩ / Trouble: 6.8kΩ

PEU-B(PACK)

Alarm: 1.0kΩ / Tamper: 1.0kΩ / Trouble: 12kΩ

PEU-C(PACK)

Alarm: 1.0kΩ / Tamper: 1.0kΩ / Trouble: 3.0kΩ

PEU-D(PACK)

Alarm: 1.1kΩ / Tamper: 1.1kΩ / Trouble: 15kΩ

PEU-E(PACK)

Alarm: 5.6kΩ / Tamper: 5.6kΩ / Trouble: 5.6kΩ

PEU-F(PACK)

series

VXI-ST

VXI-AM

VXI-DAM

WIRED MODEL

: 12m wide 2PIRs standard

: Anti-masking

: 2PIRs with Microwave

BATTERY OPERATED MODEL

VXI-R

VXI-RAM

VXI-RDAM

: Battery operated 12m 2PIRs

: Battery operated Anti-masking

: Battery operated 2PIRs with Microwave

*VXI-DAM and

VXI-RDAM can

not be used

due to

microwave

interference.

OPTIONS

Without a back box (VXI-ST / AM / DAM)

181.9

(7.16)

64.5(2.54)

With a back box (VXI-R / RAM / RDAM)

70.9(2.80)

71.3(2.81)

for wired models

for ST, AM, DAM models

Wall Tamper (WRS-02)

*Not applicable for a use of a set of dual technology models (DAM & RDAM).

− Flexible Detection Patterns

− Expanded Features in a Down-sized Body

− Digitally Enhanced Reliability

Flexible Detection Patterns

PIR DETECTOR

Optional 180 degree arrangement.

To cover a wider field, optional T-Bracket

enables two VXI detectors join to form a

single detection zone.

PIR DETECTOR with ANTI-MASKING

Active IR Anti-masking detects

covering objects on lens surface

when monitoring of the detector

status is required.

PIR and MICROWAVE DETECTOR

with ANTI-MASKING

Integrated algorithm of both PIR and Microwave provides

the ultimate stability in detection performance. In a field

where strong sun hits the land or facing direct light beams

from traffic, DAM/RDAM offers higher false alarm immunity.

5 types of pre-cut masking seals included for area congurations

Optimal different detection pattern can be

configured by a quick application of an

assigned masking seal onto the VXI lens.

VXI-DAM (Wired model)

VXI-RDAM (Battery operated model)

VXI-AM (Wired model)

VXI-RAM (Battery operated model)

Other Basic Common Features ●Double Conductive Shielding

●Area Defining Masking Seals

VXI reduced its profile size and increased its aesthetic appeal to be

adapted at various installation sites.

Digital Double Layer Detection

Both an upper and a lower detection areas must simultaneously be

crossed to generate an alarm.

The detections are independently analyzed so that a misleading

coincidence of events can be filtered out. This technology virtually

eliminates detections of smaller animals in the premises.

Digitally Enhanced Reliability

Expanded Features in a Down-sized Body

Wireless Ready

Flexible Detection Area SettingTough Mod 2TM (for DAM and RDAM models)

No DetectionDetection

etc.

No Detection

All VXI models are equipped with a digitally enhanced signal

recognition logic called SMDA. SMDA improves immunity against

various noise factors such as climate changes and vegetation

sways. VXIs expands applicable fields and reliability beyond what

VX-402 was capable.

SMDA logic (Super Multidimensional Analysis)

No alarm when only the lower detection

area is blocked.

VXI-ST (Wired model)

VXI-R (Battery operated model)

mm (inch)

8 Horizontal Area

Positions

5 Levels of Detection

Distance Adjustment

OPTEX Tough ModTM Technology enables a

long-time sustainability of Dual-detection

technology. Gold-plated Tough Mod increases

durability of a detector to withstand hot and

humid climates. Now, Tough Mod 2

extends the capability of

Dual-detection to battery operated

detectors with energy saving

circuits.

VXI installation has become easier and versatile

with a new mounting plate. Secure the plate on a

wall and mount VXI.

Alternatively, use a metal band with less than

25mm (1inch) width to secure the VXI onto any

diameter of poles. Optional wall tamper modules

are applicable to either type of installations.

Versatile Mounting Plate

Images

PCB board

Material Ceramic

Gold-plated

Antenna

Material

VX Infinity series Comventional

Wireless Trigger Life Time* Reference

VXI

CR123

(3VDC 1300mAh) 6 years 4years

4 2years years

CR2

(3VDC 750mAh)

R, RAM

Approx

RDAM

Approx

Approx Approx

A wireless transmitter of your choice can be

accommodated in VXI-R/RAM/RDAM models.

These models consume minimum electrical

current* from a battery. Optional battery box

(RBB-01) can expand the battery

capacity to prolong an operation period.

Optional EOL(End of line) resistor

modules are available.

IP55 Protection

UV Resistant ASA Body

*WTLT is an approximation based on hypothetical condition operated

with settings; LED(OFF), AM(ON), Battery Saving Timer(120sec)

*As low as 9 micro amperage at a standby.

Infinity Housing

Anti UV

Protection

IP55

All models of VXI include a back box in

their packages. The back box is

designed to accommodate various

wireless transmitters or can be used as a

conduit or a spacer between a wall and

the detector. Use

of the back box

is optional for

wired installations.

Multipurpose Spacious

Back Box

Tough Mod.2TM

Tough Micro

Wave Unit

EOL Module Socket

Use for maski ng op tiona l area . Use for two wi ng are a setting .(A or G position )

a jihgfedcb nmlka jihgfedcb nmlk

Use for maski ng op tiona l area . Use for two wi ng are a setting .(A or G position )

fedcb nmlka j

fedcb nmlk

Use for maski ng op tiona l area . Use for two wi ng are a setting .(A or G position )

1 2

fedcb nmlka j

fedcb nmlk

REAL SIZE

VXI-ST/VXI-AM/VXI-DAM

without Back Box

Disarm Sabotaged Trouble out

Trouble

signal

Detection

Alarm when both upper and lower detection

area are blocked.

Glass epoxy

Tin-plated

(1.38)

130

(5.12)

(1.18)

CAUTION: T-Bracket cannot be used for a

combination of two microwave detectors;

DAM-DAM, DAM-RDAM, RDAM-RDAM.

Pre-cut masking seals are included in all

packages.

Building upon features inherited from the VX-40 series, VX Infinity presents infinite possibility

with the power of digital processing. VXI-ST/R demonstrates a long & stable performance in

typical outdoor environment.

●Cover Tamper

●Sensitivity Adjustment Switch

●Walk Test Mode LED

Re-defining the Standard: VX-Infinity has 6 models

to choose from,

including RDAM with innovative

low current microwave technology.

Produkt Specifikationer

Mærke:	Optex
Kategori:	Bevægelsesdetektor
Model:	VXI-ST
Kode for international beskyttelse (IP):	IP55
Bredde:	70.9 mm
Dybde:	64.5 mm
Højde:	181.9 mm
Vægt:	500 g
Antal pr. pakke:	1 stk
Produktfarve:	Hvid
Driftstemperatur (T-T):	-30 - 60 °C
Forbindelsesteknologi:	Ledningsført
Placering:	Indoor, Outdoor
LED-indikatorer:	Ja
Monteringstype:	Væg
Indgangsspænding:	9.5 - 18 V
Sensortype:	Passiv infrarød (PIR) sensor
Alarmfunktion:	Ja