Orbbec Gemini 2 L Manual

Orbbec 3D printer Gemini 2 L

Læs gratis den danske manual til Orbbec Gemini 2 L (9 sider) i kategorien 3D printer. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Orbbec Gemini 2 L, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/9
Gemini 2 L
Datasheet v1.0
Product Brief
Product Specications
Product Information
SDK
Camera Setup and Operation
Installation Guide
Product Drawings
Multi-Camera Synchronization
Safety and Handling
Principles of Depth Field of View
Glossary of Terms
02
02
04
04
05
05
06
06
07
07
08
Copyright 2023 Orbbec Inc. All rights reserved. The product described may contain defects or errors or deviation from published specications.
Contact your sales representative to obtain the latest Orbbec 3D product specications. Orbbec is not responsible for any users infringing on third party
copyright or other rights in use of Orbbec products. In addition, Orbbec does not assume any liability for damages or any losses resulting from the use of
this product. All information provided here is subject to change without notice.
2. Product Specications
1. Product Brief
Gemini 2 L | Datasheet v1.0
ORBBEC. All Rights Reserved. https://orbbec3d.com/
Note: Orbbec reserves the right to change any information in the document without prior notice.
Contact us: | 2800 Livernois Rd, Troy, MI 48083 USA
info@orbbec3d.com 02
• Global shutter for RGB and IR cameras
• Wide Field of View at 91° Horizontal and 66° Vertical
• High quality depth data output from 0.25m to 10m
• Up to 60fps at 640x400 and 30fps at 1280X800 depth resolutions
• USB Type-C for power and data connectivity
• Internal IMU
• Multi-camera synchronization
Product Features:
Parameter Specications
Model G20055-15
VID/PID 0x2BC5/0x0673
Technology Active Stereo IR
Shutter Type IR: Global Shutter; Color: Global Shutter
Wavelength 850nm
Product Overview
The Orbbec Gemini 2 L is based on active stereo IR technology with a baseline
of 100mm and is equipped with Orbbec’s latest custom ASIC for high quality
depth processing. It has a depth Field of View (FoV) of up to 101° diagonally and
operates with a single USB 3.0 cable for power and connectivity. The camera
also has a proximity sensor for close distance single point ranging, which
eliminates any blind spot in depth measurements within the entire 0-10m
range. An internal IMU enables motion and position tracking.
Gemini 2 L is easy to set up and operate with the Orbbec SDK, and the camera
delivers extreme y accurate and reliable data in arious lighting conditions from l v
pitch black to semi-outdoor.

Produkt Specifikationer

Mærke: Orbbec
Kategori: 3D printer
Model: Gemini 2 L

Har du brug for hjælp?

Hvis du har brug for hjælp til Orbbec Gemini 2 L stil et spørgsmål nedenfor, og andre brugere vil svare dig


3D printer Orbbec Manualer

Orbbec

Orbbec Femto Bolt Manual

26 Januar 2025
Orbbec

Orbbec Femto Mega I Manual

26 Januar 2025
Orbbec

Orbbec Gemini 2 XL Manual

26 Januar 2025
Orbbec

Orbbec Gemini 2 L Manual

26 Januar 2025
Orbbec

Orbbec Astra 2 Manual

26 Januar 2025
Orbbec

Orbbec Gemini 2 Manual

26 Januar 2025
Orbbec

Orbbec Persee N1 Manual

26 Januar 2025
Orbbec

Orbbec Persee 2 Manual

26 Januar 2025
Orbbec

Orbbec Multi-Camera Sync Hub Pro Manual

25 Januar 2025

3D printer Manualer

Nyeste 3D printer Manualer

Creality

Creality K1 SE Manual

17 Juli 2025
Creality

Creality Ender-6 Manual

17 Juli 2025
Afinia

Afinia H+1 Manual

8 Juli 2025
Creality

Creality Ender-2 Pro Manual

9 Juni 2025
Creality

Creality Hi Manual

7 Juni 2025
Renkforce

Renkforce Pro 10+ Manual

1 April 2025
BFB

BFB 3D Touch Manual

24 Februar 2025
Sharebot

Sharebot 42 Manual

4 Februar 2025
Sharebot

Sharebot NG XXL Manual

4 Februar 2025
Creality

Creality CR-6 Max Manual

24 Januar 2025