Orbbec Multi-Camera Sync Hub Pro Manual

Orbbec 3D printer Multi-Camera Sync Hub Pro

Læs gratis den danske manual til Orbbec Multi-Camera Sync Hub Pro (11 sider) i kategorien 3D printer. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Orbbec Multi-Camera Sync Hub Pro, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/11

Multi-Camera

Sync Hub Dev/Pro

Datasheet v1.0

Product Brief

Product Information

Multi-Camera Sync Hub Internal

Connections

Multi-Camera Sync Interface and

Electrical Parameters

Cables

Multi-Camera Setup Extended Connection

Additional Interfaces of Multi-Camera

Sync Hub Dev

Software Conguration

Contact your sales representative to obtain the latest Orbbec 3D product specications. Orbbec is not responsible for any users infringing on third party

copyright or other rights while using Orbbec products. In addition, Orbbec does not assume any liability for damages or any losses resulting from the use

of this product. All information provided here is subject to change without notice.

Product Overview

Multiple cameras are used to

increase camera coverage, ll in

occlusions where a single camera

might have blind spots or blockage,

capture multiple images of the same

scene from different viewpoints

or angles or increase the effective

frame rate. Orbbec’s Sync Hubs are

available in two versions, the Sync

Hub Dev and Sync Hub Pro, and are

designed to reduce the complexity

and cost of a multi-camera network

of compatible Orbbec cameras and

external sensors. The trigger voltage

is switchable, and the number of

secondary devices can be extended

using multiple hubs.

The Developer edition, compact

and exible, uses a GPIO interface,

perfectly meeting rapid prototyping

needs during early-stage

development. The Professional

edition, designed for commercial use,

employs a reliable RJ45 interface,

guaranteeing a more stable and

longer-range signal connection using

standard CAT5 or better cables.

1. Product Brief

Product Features

• Compact, dedicated versions for

Star or Daisy Chain connections

• 1 Primary and up to 4 Secondary

devices, extensible by connecting

additional hubs

• Uses 8-pin at cables

• Switchable voltages when used

with USB-C power supply or 5V

input

Note: Orbbec reserves the right to change any information in the document without prior notice.

Multi-Camera Sync Hub Dev/Pro | Datasheet v1.0

Sync Hub Dev, Star and Daisy Chain:

• Compact, mountable enclosure

• Ingenuous use of industry standard

RJ45 interfaces and CAT5 or better

cables

• Supports 1 Primary and up to 8

secondary devices in Star format,

extensible by connecting additional

hubs

• Switchable voltages when used

with USB-C power supply

Sync Hub Pro:

Produkt Specifikationer

Mærke:	Orbbec
Kategori:	3D printer
Model:	Multi-Camera Sync Hub Pro

Har du brug for hjælp?

Hvis du har brug for hjælp til Orbbec Multi-Camera Sync Hub Pro stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

3D printer Orbbec Manualer

Orbbec Femto Bolt Manual

26 Januar 2025

Orbbec Femto Mega I Manual

26 Januar 2025

Orbbec Gemini 2 XL Manual

26 Januar 2025

Orbbec Gemini 2 L Manual

26 Januar 2025

Orbbec Astra 2 Manual

26 Januar 2025

Orbbec Gemini 2 Manual

26 Januar 2025

Orbbec Persee N1 Manual

26 Januar 2025

Orbbec Persee 2 Manual

26 Januar 2025

Orbbec Multi-Camera Sync Hub Pro Manual

25 Januar 2025

3D printer Manualer

Nyeste 3D printer Manualer

Creality Ender-2 Pro Manual

9 Juni 2025

Creality Hi Manual

7 Juni 2025

Renkforce Pro 10+ Manual

1 April 2025

BFB 3D Touch Manual

24 Februar 2025

Sharebot 42 Manual

4 Februar 2025

Sharebot NG XXL Manual

4 Februar 2025

Creality CR-6 Max Manual

24 Januar 2025

Creality CR-30 Manual

24 Januar 2025

Creality Ender-5 Pro Manual

16 Januar 2025

Creality Ender-7 Manual

16 Januar 2025