OSD Audio ACE800ST Manual

OSD Audio Højttaler ACE800ST

Læs gratis den danske manual til OSD Audio ACE800ST (2 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 40 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 20.5 anmeldelser. Har du et spørgsmål om OSD Audio ACE800ST, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

ACE800ST INSTALL GUIDE

Preparation:

Installation:

Tools For Installation Speaker Wire Guide

Considerations

Cut Out

- Pencil

- Drill

- Tape Measure

- Wire Cutter

- Phillips Screwdriver

- Utility Knife

- Safety Eye Wear

- Gloves

- Sandpaper

- Where is the best place to install the speakers?

- Where do the speakers sound the best?

- Separate the speakers 6 - 10 feet apart.

NOTE: This is the most important part of the entire installation.

If you are not certain whether any obstructions exist behind the

desired mounting area, you should start by cutting a small hole in

the center of your penciled mounting hole with a drywall saw.

Trace along the included template. Cut along the traced line using a

drywall saw or rotary drill. Use a piece of sandpaper to sand down the

cut out edge for a smoother contour. (See Diagram 1.)

18AWG minimum - for distances up to …………………. 10 ft

16AWG - from …………………………………..…... 10 to 50 ft

14AWG - from …………………………………...… 50 to 100 ft

Diagram 1

Connection

Transformer Settings

When connecting any speakers to the amplier always make sure

the power is off. Locate the connection terminals on the back of

your amplier. Always make sure to connect audio out from the

back of your amplier to the speakers.

(See Diagram 2.)

NOTE: Not all Amplier can safely play more than one pair of

speakers at once. Please refer to your amplier owner’s manual for

impedance and wattage compatibility.

Choose the correct wires on the transformer for your particular

application.

(See Diagram 3.)

NOTE: Tap settings may differ slightly from diagram

depending on model.

Left Out

Left Speaker

Amplier

Right Out

Right Speaker

- -

+ +

Diagram 2

Diagram 3

4W 8W 16W 32W COM

COM 8Ω

All OSD Audio speaker products have (10) Year Limited Warranty against defects in materials and workmanship. Proof of purchase

must accompany all claims. During the warranty period OSD Audio will replace any defective part and correct any defect in

workmanship without charge for either parts or labor OSD Audio may replace returned speakers with a product of equal value and

performance. In such cases, some modication to the mounting may be necessary and are not OSD Audios responsibility.

For this warranty to apply, the unit must be installed and used according to its written instructions. If necessary, repairs must be

performed by OSD Audio. The unit must be returned to OSD Audio at the owner’s expense and with prior written permission.

Accidental damage and shipping damage are not considered defects, nor is damaged resulting from abuse or from servicing

performed by an agency or person not specically authorized in writing by OSD Audio

OSD Audio sells products only through authorized dealers and distributors to ensure that customers obtain proper support and

service. Any OSD Audio product purchased from an unauthorized dealer or other source, including retailers, mail over dealers and

on-line sellers will not be honored or serviced under existing OSD Audio warranty policy. Any sale of product by an unauthorized

source or other manner not authorized by OSD Audio shall void the warranty on the applicable product.

Damage to or destruction of components due to application of excessive power voids the warranty on those parts. In these cases,

repairs will be made on the basis of the retail value of the parts and labor. To return for repairs, you must email customer service

at RMA@audiogeargroup.com for a Returned Merchandise Authorization (RMA) number# then the unit must be shipped to OSD

Audio at the owner’s expense, along with a note explaining the nature of service required. Be sure to pack the speaker(s) in a

corrugated container with at least 3 inches of resilient material to protect the unit from damage in transit.

This Warranty Does Not Cover: Damage caused by abuse, accident, misuse, negligence, or improper operation (installation) •

Any products that have been altered or modied • Any product whose identifying number of decal, serial #, etc. has been altered,

defaced or removed • Normal wear and maintenance.

ACE800ST INSTALL GUIDE

WARRANTY

ACE800ST Manual 1/25

Specs

Trimless 70V Commercial Ceiling Speaker

Woofer: 8” Poly Cone with Rubber Surround

Tweeter: .5” PEI Dome

Frequency Response: 35Hz-20kHz

Power Handling: 120W

Sensitivity: 89 dB 1w/1m

Impedance: 8 Ohms/ 70V

Wattage Taps: 32W, 16W, 8W, 4W, or 8 Ohms

Diameter & Depth: 10.75” x 4.1”

Cutout Diameter: 9.3”

OSD Audio | Brea, CA | osdaudio.com

Mounting

Tighten the mounting brackets by simply turning the screws on

the front of the speaker bafe slowly clockwise. The quick-turn

mounting system and frame will “sandwich” or clamp around the

dry-wall to hold the speaker securely in place once fully tightened

to the locked position.

(See Diagram 4.)

Open PositionLocked Position

Diagram 4

Produkt Specifikationer

Mærke:	OSD Audio
Kategori:	Højttaler
Model:	ACE800ST

Har du brug for hjælp?

Hvis du har brug for hjælp til OSD Audio ACE800ST stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler OSD Audio Manualer

OSD Audio ACE800ST Manual

11 Februar 2025

OSD Audio Black R103 Manual

29 Januar 2025

OSD Audio FORZA-4 Manual

28 Januar 2025

OSD Audio Black R82SM Manual

28 Januar 2025

OSD Audio Black R43SQ Manual

27 Januar 2025

OSD Audio Black R52 Manual

27 Januar 2025

OSD Audio Black Pendant83 Manual

27 Januar 2025

OSD Audio Black BK-T61 Manual

14 Januar 2025

OSD Audio Black BK-T81 Manual

14 Januar 2025

OSD Audio Nero ARC Sub Manual

14 Januar 2025

Højttaler Manualer

Nyeste Højttaler Manualer

DS18 PRO-TWN5 Manual

17 Juni 2025

DS18 PRO-CF69.4NR Manual

16 Juni 2025

DS18 PRO-FR6NEO Manual

16 Juni 2025

DS18 SLG-AR6V2 Manual

16 Juni 2025

DS18 Hydro NXL-6 Manual

16 Juni 2025

DS18 PRO-HY6.4B Manual

16 Juni 2025

DS18 PRO-HY6MSL Manual

16 Juni 2025

DS18 HYDRO JK-BD-LR Manual

16 Juni 2025

Induction Dynamics S1.8SW Manual

16 Juni 2025

DS18 PRO-NS 6.4 Manual

16 Juni 2025