Owon CP024 Manual

Owon Måleudstyr CP024

Læs gratis den danske manual til Owon CP024 (4 sider) i kategorien Måleudstyr. Denne vejledning er vurderet som hjælpsom af 50 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 25.5 anmeldelser. Har du et spørgsmål om Owon CP024, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

MODEL: CP024

AC/DC CLAMP CURRENT PROBE

1、

、

、、INTRODUCTION

The is a mini size clamp current probe. It can convert the test current into a

voltage output. As an adapter of the oscilloscope, it is very convenient to use

this probe to test AC or DC current in any conductor.All ranges are selected by

toggle switch, easy to operate.It is an ideal tester for maintenance and

inspection work on all types of electrical equipment.

2、

、

、、SAFETY INTRODUCTIONS

Please according to the method of using this manual before operating

equipment, in case the instrument damage.

To maintain the instrument use safety, please do not test beyond the

prescribed current.

Do not use a broken probe signal output line.

When testing working voltage higher than 60 VDC or 30 vac line, please be

careful to use.

Operating environment condition:

1. Secondary safety insulation

2. Secondary pollution

3. Suitable for indoor use

4. Relative humidity below 70%RH

5. Operating temperature: 0C to 40C

Maintenance Essentials:The inspection and maintenance detailed in this

manual shall be handled by professionally qualified maintenance personnel.

Essentials of cleaning:Clean with dry cloth, do not use stain remover, solvent

clean this probe.

Safety symbols description:

Caution, risk of danger (refer to this manual for

specific Warning or Caution information)

Equipment protected throughout by double

insulation or reinforced insulation

Conforms to European Union directives

3、

、

、、Specification

3.1 GENERAL Specification

RANGE：

：

：：4A，40A，400A

Minimum resolution：

：

：：10mA

Band wide up to 200KHz（-3dB）

Error by earth magnetic: ± 30mA max

Remanence(±100A



0A)：

：

：： ± 30mA max

Jaw size: 23mm (Max)

Auto Zero at power on

Low battery/return to zero indicator: When the battery voltage is lower

than the operating voltage, the indicator lights up; When press

the return to zero key, the output automatically return to zero, at

the same time the indicator light on, after the end of the return to

zero yellow and green indicator light automatically out.

Power Supply: 9V 6F22 Battery

Power Consumption:280mW (typical)

Operating temperature and humidity:

0C to 40C ,relative humidity below 70%RH

Store temperature and humidity:

-10C to 60C ,relative humidity below 70%RH

Size: 180mm(L)x 44mm(W)x 30mm(H)

Weight: Approx. 200g

Accessories: Manual,Battery

3.2ELECTRICAL SPECIFICATIONS

Accuracy are (%rdg + Number of current) at 23C5C below 70%RH;

DC CURRENT:

Range

Accuracy

Sensitivity

±1.5%rdg±5d

1 mV/10 m A

40A

±1.5%rdg±5d

1 mV/ 0.1A

300A

±1.5%rdg±5d

1 mV/ 1A

300A~400A

±3.5%rdg±5d

1 mV/ 1A

AC CURRENT:

Produkt Specifikationer

Mærke:	Owon
Kategori:	Måleudstyr
Model:	CP024

Har du brug for hjælp?

Hvis du har brug for hjælp til Owon CP024 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Måleudstyr Owon Manualer

5 September 2024

5 September 2024

2 September 2024

2 September 2024

2 September 2024

2 September 2024

2 September 2024

2 September 2024

1 September 2024

1 September 2024

Måleudstyr Manualer

Nyeste Måleudstyr Manualer

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025