Ozito AGM-5005U Manual

Ozito Kværn AGM-5005U

Læs gratis den danske manual til Ozito AGM-5005U (3 sider) i kategorien Kværn. Denne vejledning er vurderet som hjælpsom af 39 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 20 anmeldelser. Har du et spørgsmål om Ozito AGM-5005U, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

size 445 x 210 mm

Danger! - Read the operating instructions to re-

duce the risk of inquiry

Caution! Wear ear-mus. The impact of noise

can cause damage to hearing.

Caution! Wear a breathing mask. Dust which

is injurious to health can be generated when

working on wood and other materials. Never use

the device to work on any materials containing

asbestos!

Caution! Wear safety goggles. Sparks gene-

rated during working or splinters, chips and dust

emitted by the device can cause loss of sight.

This safety guard is designed for sanding/

grinding.

This safety guard is designed for cutting and

grinding/sanding.

AGM-5005U

GB Additonal operating & safety instructions Angle Grinder

Yang/Product-ManagementWeichselgartner/General-Manager

explains the following conformity according to EU directives and norms for

the following product

Angle Grinder AGM-5005U (Ozito)

2014/29/EU

2005/32/EC_2009/125/EC

2014/35/EU

2006/28/EC

X 2014/30/EU

2014/32/EU

2014/53/EC

2014/68/EU

90/396/EC_2009/142/EC

89/686/EC_96/58/EC

X 2011/65/EU

X 2006/42/EC

Annex IV

Noti ed Body:

Noti ed Body No.:

Reg. No.:

2000/14/EC_2005/88/EC

Annex V

Annex VI

Noise: measured LWA = dB (A); guaranteed LWA = dB (A)

P = KW; L/Ø = cm

Noti ed Body:

2004/26/EC

Emission No.:

Standard references: EN 60745-1; EN 60745-2-3; EN 55014-1;

EN 55014-2; EN 61000-3-2; EN 61000-3-3

Landau/Isar, den 05.07.2016

First CE: 16 Archive-File/Record: NAPR014358

Art.-No.: 44.722.64 I.-No.: 11016 Documents registrar: Robert Gehard

Subject to change without notice Wiesenweg 22, D-94405 Landau/Isar

ISC GmbH · Eschenstraße 6 · D-94405 Landau/Isar

Declaration of conrmity

The reprinting or reproduction by any other me-

ans, in whole or in part, of documentation and

papers accompanying products is permitted only

with the express consent of the iSC GmbH.

Subject to technical changes

Service information

We have competent service partners in all countries named on the guarantee certicate whose contact

details can also be found on the guarantee certicate. These partners will help you with all service re-

quests such as repairs, spare and wearing part orders or the purchase of consumables.

Please note that the following parts of this product are subject to normal or natural wear and that the

following parts are therefore also required for use as consumables.

Category Example

Wear parts* Carbon brushes

Consumables* Cutting wheels, grinding wheels

Missing parts

* Not necessarily included in the scope of delivery!

In the eect of defects or faults, please register the problem on the internet at www.isc-gmbh.info. Plea-

se ensure that you provide a precise description of the problem and answer the following questions in all

cases:

• Did the equipment work at all or was it defective from the beginning?

• Did you notice anything (symptom or defect) prior to the failure?

• What malfunction does the equipment have in your opinion (main symptom)?

Describe this malfunction.

size 445 x 210 mm

Items supplied

Please check that the article is complete as

specied in the scope of delivery. If parts are

missing, please contact our service center or the

sales outlet where you made your purchase at

the latest within 5 working days after purchasing

the product and upon presentation of a valid bill

of purchase. Also, refer to the warranty table in

the service information at the end of the operating

instructions.

• Open the packaging and take out the equip-

ment with care.

• Remove the packaging material and any

packaging and/or transportation braces

(if available).

• Check to see if all items are supplied.

• Inspect the equipment and accessories for

transport damage.

• If possible, please keep the packaging until

the end of the guarantee period.

Danger!

The equipment and packaging material are

not toys. Do not let children play with plastic

bags, foils or small parts. There is a danger of

swallowing or suocating!

Proper use

The angle grinder is designed for grinding metal

and stone when using the appropriate grinding

wheel and guard.

Warning! To cut metal and stone the grinder/san-

der may only be used when the guard (available

as an accessory) is mounted.

The equipment is to be used only for its prescri-

bed purpose. Any other use is deemed to be a

case of misuse. The user/operator and not the

manufacturer will be liable for any damage or inju-

ries of any kind caused as a result of this.

Please note that our equipment has not been de-

signed for use in commercial, trade or industrial

applications. Our warranty will be voided if the

machine is used in commercial, trade or industrial

businesses or for equivalent purposes.

Technical data

Mains voltage: 230-240 V ~ 50 Hz ........................

Power input: 1010 W ............................................

Idling speed: 12,000/min.......................................

Max. wheel diameter: 125 mm .............................

Grinding wheel: 125 x 22.2 x 6 mm ......................

Cutting wheel: 125 x 22.2 x 3 mm ........................

Mounting spindle thread: M 14 .............................

Protection class: II / ........................................... &

Danger!

Sound and vibration

Sound and vibration values were measured in

accordance with EN 60745.

LpA sound pressure level ................... 88.97 dB(A)

KpA uncertainty ............................................. 3 dB

LWA

sound power level ..................... 99.97 dB(A)

KWA uncertainty ............................................. 3 dB

Wear ear-mus.

The impact of noise can cause damage to hea-

ring.

Total vibration values (vector sum of three direc-

tions) determined in accordance with EN 60745.

Surface sanding/grinding:

Vibration emission value ahAG = 14.08 m/s2

K uncertainty = 1.5 m/s2

The specied vibration value was established in

accordance with a standardized testing method. It

may change according to how the electric equip-

ment is used and may exceed the specied value

in exceptional circumstances.

The specied vibration value can be used to

compare the equipment with other electric power

tools.

The specied vibration value can be used for initi-

al assessment of a harmful eect.

Keep the noise emissions and vibrations to a

minimum.

• Only use appliances which are in perfect wor-

king order.

• Service and clean the appliance regularly.

• Adapt your working style to suit the appliance.

• Do not overload the appliance.

• Have the appliance serviced whenever

necessary.

• Switch the appliance off when it is not in use.

• Wear protective gloves.

Caution!

Residual risks

Even if you use this electric power tool in ac-

cordance with instructions, certain residual

risks cannot be rules out. The following ha-

zards may arise in connection with the equip-

ment’s construction and layout:

1. Lung damage if no suitable protective dust

mask is used.

2. Damage to hearing if no suitable ear protecti-

on is used.

3. Health damage caused by hand-arm vibra-

tions if the equipment is used over a pro-

longed period or is not properly guided and

maintained.

For EU countries only

Never place any electric power tools in your

household refuse.

To comply with European Directive 2012/19/EC

concerning old electric and electronic equipment

and its implementation in national laws, old elec-

tric power tools have to be separated from other

waste and disposed of in an environment-friendly

fashion, e.g. by taking to a recycling depot.

Recycling alternative to the return request:

As an alternative to returning the equipment to

the manufacturer, the owner of the electrical

equipment must make sure that the equipment

is properly disposed of if he no longer wants to

keep the equipment. The old equipment can be

returned to a suitable collection point that will

dispose of the equipment in accordance with the

national recycling and waste disposal regulations.

This does not apply to any accessories or aids

without electrical components supplied with the

old equipment.

Produkt Specifikationer

Mærke:	Ozito
Kategori:	Kværn
Model:	AGM-5005U

Har du brug for hjælp?

Hvis du har brug for hjælp til Ozito AGM-5005U stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Kværn Ozito Manualer

Ozito LRT-4100U Manual

9 August 2025

Ozito EGR-2050U Manual

9 August 2025

Ozito PXAGS-500U Manual

9 August 2025

Ozito RTR-040U Manual

9 August 2025

Ozito RTR-2000U Manual

9 August 2025

Ozito AGB-1201 Manual

29 November 2023

Ozito AGM-5005U Manual

19 Oktober 2023

Ozito AGS-4050U Manual

1 Oktober 2023

Ozito AGL-9100U Manual

12 September 2023

Ozito PXAGS-500 Manual

27 Juli 2023

Kværn Manualer

Nyeste Kværn Manualer

Milwaukee M12 Fuel 2486-20 Manual

13 August 2025

Flex L 1606 VR Manual

13 August 2025

Milwaukee M18 Fuel 2888-20 Manual

13 August 2025

Milwaukee M12 Fuel 3485-20 Manual

13 August 2025

Milwaukee M12 Fuel 3485-22 Manual

13 August 2025

Graef ABSOLUTE Manual

13 August 2025

Milwaukee M18 Fuel 2889-20 Manual

13 August 2025

Milwaukee M18 Fuel 2887-20 Manual

12 August 2025

Camry CR 4301 Manual

12 August 2025

Makita DCC500 Manual

12 August 2025