Ozito PXGMTK-2536 Manual

Ozito Multiværktøj PXGMTK-2536

Læs gratis den danske manual til Ozito PXGMTK-2536 (40 sider) i kategorien Multiværktøj. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Ozito PXGMTK-2536, eller vil du spørge andre brugere om produktet?

Side 1/40
1
INSTRUCTION MANUAL
0223
PXGMTK-2536
BRUSHLESS 4-IN-1
MULTI TOOL KIT
2
GENERAL MACHINE SAFETY WARNINGS
WARNING! Failure Read all safety warnings, instructions, illustrations and specifications provided with this machine.
to follow all instructions listed below may result in electric shock, re and/or serious injury.
Save all warnings and instructions for future reference.
The term “machine” in the warnings refers to your mains-operated (corded) machine or battery-operated (cordless) machine.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate machines in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Machines create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a machine. Distractions can cause you to lose control.
2) Electrical safety
a) Machine plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed
(grounded) machines. Unmodied plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk
of electric shock if your body is earthed or grounded.
c) Do not expose machines to rain or wet conditions. Water entering a machine will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the machine. Keep cord away from heat, oil,
sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
e) When operating a machine outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk
of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating a machine. Do not use a machine while you are
tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating machines may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat or
hearing protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery
pack, picking up or carrying the machine. Carrying machines with your nger on the switch or energising machines that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the machine on. A wrench or a key left attached to a rotating part of the machine may result in
personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the machine in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly
used. Use of dust collection can reduce dust-related hazards.
h) Do not let familiarity gained from frequent use of machines allow you to become complacent and ignore machine safety
principles. A careless action can cause severe injury within a fraction of a second.
4) Machine use and care
a) Do not force the machine. Use the correct machine for your application. The correct machine will do the job better and safer at the rate for which
it was designed.
b) Do not use the machine if the switch does not turn it on and off. Any machine that cannot be controlled with the switch is dangerous and must be
repaired.
c) Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the machine before making
any adjustments, changing accessories, or storing machines. Such preventive safety measures reduce the risk of starting the machine accidentally.
d) Store idle machines out of the reach of children and do not allow persons unfamiliar with the machine or these instructions to
operate the machine. Machines are dangerous in the hands of untrained users.
e) Maintain machines and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other
condition that may affect the machine’s operation. If damaged, have the machine repaired before use. Many accidents are caused by
poorly maintained machines.
f) Keep cutting machines sharp and clean. Properly maintained cutting machines with sharp cutting edges are less likely to bind and are easier to control.
g) Use the machine, accessories and machine bits etc. in accordance with these instructions, taking into account the working
conditions and the work to be performed. Use of the machine for operations different from those intended could result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe
handling and control of the machine in unexpected situations.
5) Battery machine use and care
a) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of re when
used with another battery pack.
b) Use machines only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and re.


Produkt Specifikationer

Mærke: Ozito
Kategori: Multiværktøj
Model: PXGMTK-2536

Har du brug for hjælp?

Hvis du har brug for hjælp til Ozito PXGMTK-2536 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Multiværktøj Ozito Manualer

Ozito

Ozito PXPPHTK-258 Manual

6 September 2024
Ozito

Ozito PXGMTK-2536 Manual

5 September 2024
Ozito

Ozito PXMFTK-200 Manual

14 August 2024
Ozito

Ozito MFR-2200U Manual

13 August 2024
Ozito

Ozito PXMFTS-100U Manual

12 August 2024
Ozito

Ozito MFR-2200 Manual

4 August 2024
Ozito

Ozito ZLRTS-012 Manual

24 December 2022
Ozito

Ozito PXMFTS-100 Manual

22 November 2022
Ozito

Ozito RTR-2000 Manual

1 November 2022

Multiværktøj Manualer

Nyeste Multiværktøj Manualer

Draper

Draper 58300 Manual

6 Juni 2025
Draper

Draper 19392 Manual

31 Maj 2025
Vonroc

Vonroc OT505DC Manual

9 Januar 2025
Einhell

Einhell TE-MG 18/1 Li Manual

30 December 2025
Alpha Tools

Alpha Tools A 180 Manual

28 December 2024
Powerblade

Powerblade PC4MT5 Manual

10 December 2024
EGO

EGO PH1420E Manual

8 December 2024
Einhell

Einhell TE-MG 200 E Manual

23 November 2024