Ozito PXMFTS-100 Manual

Ozito Multiværktøj PXMFTS-100

Læs gratis den danske manual til Ozito PXMFTS-100 (6 sider) i kategorien Multiværktøj. Denne vejledning er vurderet som hjælpsom af 36 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 18.5 anmeldelser. Har du et spørgsmål om Ozito PXMFTS-100, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

SPECIFICATIONS

Voltage: 18V

No Load Speed: 11,000-20,000/min

Orbit Angle: 3.2°

Sanding Pad Size: 90 x 90 x 90mm

Sandpaper Size: 93 x 93 x 93mm

Weight: 1.18kg

MULTI FUNCTION

TOOL

INSTRUCTION MANUAL

ozito.com.au

STANDARD EQUIPMENT

Multi Function Tool

Accessories

PXMFTS-100

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU

MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS

WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO

RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE

OUR CUSTOMER SERVICE HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL

NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER

SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND

ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE

WARRANTY POLICY OR PROCEDURE.

OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

The benets provided under this warranty are in addition to other rights and

remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded at law. You are entitled to

a replacement or refund for a major failure and for compensation for any other

reasonably foreseeable loss or damage. You are also entitled to have the goods

repaired or replaced if the goods fail to be of acceptable quality and the failure

does not amount to a major failure.

Generally you will be responsible for all costs associated with a claim under this

warranty, however, where you have suffered any additional direct loss as a result of

a defective product you may be able to claim such expenses by contacting our

customer service helpline above.

0318

WARNING

The following actions will result in the warranty being

void.

• If the tool has been operated on a supply voltage other than that specied

on the tool.

• If the tool shows signs of damage or defects caused by or resulting from

abuse, accidents or alterations.

• Failure to perform maintenance as set out within the instruction manual.

• If the tool is disassembled or tampered with in any way.

5 YEAR REPLACEMENT WARRANTY

Your Product is guaranteed for a period of 60 months from the original date of

purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it

will be replaced in accordance with the terms of this warranty. Lithium Ion

batteries and chargers are covered by a 36 month

warranty and are excluded from the warranty extension. Warranty excludes

consumable parts, for example: cutting blades.

WOOD M ET AL

1. FITTING THE BATTERY

Inserting & Removing the Battery

1 Slide the battery into the seating

at the back of the tool until it

clicks into place.

2 To remove, press and

hold the battery release

tab and then slide out.

WOOD METAL

KNOW YOUR PRODUCT SETUP & PREPARATION

CORDLESS MULTI FUNCTION TOOL

ACCESSORIES

1 2 3 4

7 8 9 10 11 12 13

1 Accessory Locking Lever

2 On/Off Switch

3 Variable Speed Dial

4 Battery Seating

5 Accessory Drive Spindle

6 Sure Grip Handle

7 Sanding Pad

8 Sanding Paper

(3 x 60grit, 3 x 80grit, 3 x 120grit)

9 Wood Plunge Blade

10 Metal Plunge Blade

11 Semi-Circular Blade

12 Scraper

13 Accessory Adapter

ONLINE MANUAL

Scan this QR Code with your

mobile device to take you to the

online manual.

BATTERY & CHARGER

This tool is compatible with all batteries and chargers from the Ozito

Power X Change Range.

Battery protection system

The tool is equipped with the battery protection system, which helps to ensure a long service

life.

The output power automatically cuts off during operation when the tool and/or battery are

placed under the following situations:

• When the tool is overloaded:

If this occurs, release the trigger switch and remove causes of overload, then pull the

switch trigger again to restart.

• When the remaining battery capacity becomes low:

Recharge the battery pack.

Note: The battery protection system does not in any way damage the tool.

Note: The indicated capacity may be lower than the actual level during use or immediately

after using the tool.

To absorb the vibrations which arise

on the rechargeable battery, there

is some play between the battery

and the tool’s battery seating. This

is normal and has no effect on the

performance of the equipment or the

rechargeable battery

Vibration Absorption

Produkt Specifikationer

Mærke:	Ozito
Kategori:	Multiværktøj
Model:	PXMFTS-100

Har du brug for hjælp?

Hvis du har brug for hjælp til Ozito PXMFTS-100 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Multiværktøj Ozito Manualer

Ozito PXPPHTK-258 Manual

6 September 2024

Ozito PXGMTK-2536 Manual

5 September 2024

Ozito PXMFTK-200 Manual

14 August 2024

Ozito MFR-2200U Manual

13 August 2024

Ozito PXMFTS-100U Manual

12 August 2024

Ozito PXCPPHTC-418U Manual

6 August 2024

Ozito MFR-2200 Manual

4 August 2024

Ozito ZLRTS-012 Manual

24 December 2022

Ozito PXMFTS-100 Manual

22 November 2022

Ozito RTR-2000 Manual

1 November 2022

Multiværktøj Manualer

Nyeste Multiværktøj Manualer

Draper 58300 Manual

6 Juni 2025

Draper Storm Force 58307 Manual

6 Juni 2025

Meec Tools 010-644 Manual

2 Juni 2025

Draper 19392 Manual

31 Maj 2025

Vonroc OT505DC Manual

9 Januar 2025

Einhell TE-MG 18/1 Li Manual

30 December 2025

Alpha Tools A 180 Manual

28 December 2024

Powerblade PC4MT5 Manual

10 December 2024

EGO PH1420E Manual

8 December 2024

Einhell TE-MG 200 E Manual

23 November 2024