Ozito RHD-6100U Manual

Ozito Hammer RHD-6100U

Læs gratis den danske manual til Ozito RHD-6100U (2 sider) i kategorien Hammer. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Ozito RHD-6100U, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
size 445 x 210 mm
Danger! - Read the operating instructions to re-
duce the risk of inquiry
Caution! Wear ear-mus. The impact of noise
can cause damage to hearing.
Caution! Wear a breathing mask. Dust which
is injurious to health can be generated when
working on wood and other materials. Never use
asbestos!
Caution! Wear safety goggles. Sparks gene-
rated during working or splinters, chips and dust
emitted by the device can cause loss of sight.
Select between the individual functions only when
the equipment is at a standstill. If you fail to obser-
ve this point, the equipment may be damaged.
The reprinting or reproduction by any other me-
ans, in whole or in part, of documentation and
papers accompanying products is permitted only
with the express consent of the iSC GmbH.
Subject to technical changes
RHD-6100U
GB Additonal operating & safety instructions Rotary Hammer Drill
Service information
We have competent service partners in all countries named on the guarantee certicate whose contact
details can also be found on the guarantee certicate. These partners will help you with all service re-
quests such as repairs, spare and wearing part orders or the purchase of consumables.
Please note that the following parts of this product are subject to normal or natural wear and that the
following parts are therefore also required for use as consumables.
Category Example
Wear parts* Carbon brushes, chuck
Consumables* Drill bits, chisels
Missing parts
* Not necessarily included in the scope of delivery!
In the eect of defects or faults, please register the problem on the internet at www.isc-gmbh.info. Plea-
se ensure that you provide a precise description of the problem and answer the following questions in all
cases:
•
Did the equipment work at all or was it defective from the beginning?
•
Did you notice anything (symptom or defect) prior to the failure?
•
What malfunction does the equipment have in your opinion (main symptom)?
Describe this malfunction.
Yang/Product-ManagementWeichselgartner/General-Manager
explains the following conformity according to EU directives and norms for
the following product
Rotary Hammer Drill RHD-6100U (Ozito)
2014/29/EU
2005/32/EC_2009/125/EC
2014/35/EU
2006/28/EC
X
2014/30/EU
2014/32/EU
2014/53/EC
2014/68/EU
90/396/EC_2009/142/EC
89/686/EC_96/58/EC
X
2011/65/EU
X
2006/42/EC
Annex IV
Noti ed Body:
Noti ed Body No.:
Reg. No.:
2000/14/EC_2005/88/EC
Annex V
Annex VI
Noise: measured L
WA
= dB (A); guaranteed L
WA
= dB (A)
P = KW; L/Ø = cm
Noti ed Body:
2012/46/EU
Emission No.:
Standard references: EN 60745-1; EN 60745-2-6; EN 55014-1; EN 55014-2;
EN 61000-3-2; EN 61000-3-3
Landau/Isar, den 29.06.2016
First CE: 16 Archive-File/Record: NAPR014309
Art.-No.: 44.722.37 I.-No.: 11016 Documents registrar: Robert Gehard
Subject to change without notice Wiesenweg 22, D-94405 Landau/Isar
ISC GmbH · Eschenstraße 6 · D-94405 Landau/Isar
Declaration of conrmity
size 445 x 210 mm
Items supplied
Please check that the article is complete as
specied in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suocating!
Proper use
The tool is designed for drilling with hammer acti-
on in concrete, rock and brick, as well as for chi-
seling work, always using the respective correct
drill or chisel bit.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Technical data
Mains voltage: 230-240 V ~ 50 Hz ........................
Power input: ............................................ 1500 W
Idling speed: ............................................750/min
Impact rate: 3000/min ...........................................
Drilling capacity masonry: 36 mm ........................
Protection class: II / ...........................................
&
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L
pA
sound pressure level ........................ 98 dB(A)
K
pA
uncertainty .............................................. 3 dB
L
WA
sound power level .......................... 109 dB(A)
K
WA
uncertainty ............................................. 3 dB
The hammer drill is not designed for outdoors
use as specied I Article 3 of Directive 2000/14/
EC_2005/88/EC.
Wear ear-mus.
The impact of noise can cause damage to
hearing.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 60745.
Hammer drilling in concrete (Handle)
Vibration emission value a
h,HD
= 6.118 m/s
2
K uncertainty = 1.5 m/s
2
Hammer drilling in concrete (Additional
handle)
Vibration emission value a
h,HD
= 7.16 m/s
2
K uncertainty = 1.5 m/s
2
Chiseling (Handle)
Vibration emission value a
h,Cheq
= 13.6 m/s
2
K uncertainty = 1.5 m/s
2
Chiseling (Additional handle)
Vibration emission value a
h,Cheq
= 7.4 m/s
2
K uncertainty = 1.5 m/s
2
The specied vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specied value
in exceptional circumstances.
The specied vibration value can be used to
compare the equipment with other electric power
tools.
The specied vibration value can be used for initi-
al assessment of a harmful eect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever
necessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in ac-
cordance with instructions, certain residual
risks cannot be rules out. The following ha-
zards may arise in connection with the equip-
ment’s construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protecti-
on is used.
3. Health damage caused by hand-arm vibra-
tions if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
For EU countries only
Never place any electric power tools in your
household refuse.
To comply with European Directive 2012/19/EC
concerning old electric and electronic equipment
and its implementation in national laws, old elec-
tric power tools have to be separated from other
waste and disposed of in an environment-friendly
fashion, e.g. by taking to a recycling depot.
Recycling alternative to the return request:
As an alternative to returning the equipment to
the manufacturer, the owner of the electrical
equipment must make sure that the equipment
is properly disposed of if he no longer wants to
keep the equipment. The old equipment can be
returned to a suitable collection point that will
dispose of the equipment in accordance with the
national recycling and waste disposal regulations.
This does not apply to any accessories or aids
without electrical components supplied with the
old equipment.

Produkt Specifikationer

Mærke: Ozito
Kategori: Hammer
Model: RHD-6100U

Har du brug for hjælp?

Hvis du har brug for hjælp til Ozito RHD-6100U stil et spørgsmål nedenfor, og andre brugere vil svare dig


Hammer Ozito Manualer

Ozito

Ozito RHD-1600U Manual

9 August 2025
Ozito

Ozito RHD-6100U Manual

9 August 2025
Ozito

Ozito RHD-900U Manual

9 August 2025
Ozito

Ozito RHD-9035 Manual

12 April 2024

Hammer Manualer

Nyeste Hammer Manualer

Bavaria

Bavaria BDH 1600 Manual

28 September 2025
Draper

Draper Storm Force 65142 Manual

23 September 2025
FERM

FERM DHM-1800 Manual

20 September 2025
Lescha

Lescha BELLE BHB 27 Manual

20 September 2025
Bosch

Bosch GBH 18V-22 X Professional Manual

16 September 2025
Go On

Go On BH 850/1 Manual

12 September 2025
Altrad

Altrad BELLE BHB 27 Manual

11 September 2025
DeWalt

DeWalt DCD997C Manual

7 September 2025
DeWalt

DeWalt D25911 Manual

3 September 2025
Stanley

Stanley Bostitch P50 Manual

1 September 2025