Palmer MS 02 Manual

Palmer Ikke kategoriseret MS 02

Læs gratis den danske manual til Palmer MS 02 (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Palmer MS 02, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

PMS – 2-CHANNEL MICROPHONE SPLITTER02

SAFETY INFORMATION

1. Please read these instructions carefully.

2. Keep all information and instructions in a safe place.

3. Follow the instructions.

4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.

5. Use the equipment only in the intended manner and for the intended purpose.

6. Use only sufficiently stable and compatible stands and/or mounts (for fixed installations). Make cer-

tain that wall mounts are properly installed and secured. Make certain that the equipment is installed

securely and cannot fall down.

7. During installation, observe the applicable safety regulations for your country.

8. Never install and operate the equipment near radiators, heat registers, ovens or other sources of heat.

Make certain that the equipment is always installed so that is cooled sufficiently and cannot overheat.

9. Never place sources of ignition, e.g., burning candles, on the equipment.

10. Ventilation slits must not be blocked.

11. Do not use this equipment in the immediate vicinity of water (does not apply to special outdoor

equipment - in this case, observe the special instructions noted below. Do not expose this equipment

to flammable materials, fluids or gases.

12. Make certain that dripping or splashed water cannot enter the equipment. Do not place containers

filled with liquids, such as vases or drinking vessels, on the equipment.

13. Make certain that objects cannot fall into the device.

14. Use this equipment only with the accessories recommended and intended by the manufacturer.

15. Open the device for changing the battery, do not modify this equipment.

16. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due

to tripping hazards.

17. During transport, make certain that the equipment cannot fall down and possibly cause property

damage and personal injuries.

18. If your equipment is no longer functioning properly, if fluids or objects have gotten inside the equip-

ment or if it has been damaged in another way, switch it off immediately and unplug it from the

mains outlet (if it is a powered device). This equipment may only be repaired by authorized, qualified

personnel.

19. Clean the equipment using a dry cloth.

20. Comply with all applicable disposal laws in your country. During disposal of packaging, please sep-

arate plastic and paper/cardboard.

21. Plastic bags must be kept out of reach of children.

22. If the equipment has been exposed to strong fluctuations in temperature (for example, after trans-

port), do not switch it on immediately. Moisture and condensation could damage the equipment. Do

not switch on the equipment until it has reached room temperature.

23. Do not step on the power cord. Make certain that the power cable does not become kinked, especially

at the mains outlet and/or power adapter and the equipment connector.

24. When connecting the equipment, make certain that the power cord or power adapter is always freely

accessible. Always disconnect the equipment from the power supply if the equipment is not in use

or if you want to clean the equipment. Always unplug the power cord and power adapter from the

power outlet at the plug or adapter and not by pulling on the cord. Never touch the power cord and

power adapter with wet hands.

25. To disconnect the equipment from the power mains completely, unplug the power cord or power

adapter from the power outlet.

26. Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning strike

or before extended periods of disuse.

CAUTION:

CAU T ION

RIS K OF SELE CTRIC HOCK

DO N O NOT PE

There are no user serviceable parts inside. Have repairs carried out only by qualified service personnel.

CAUTION – HIGH VOLUME LEVELS WITH AUDIO PRODUCTS!

This equipment is intended for professional use. Therefore, commercial use of this equipment is subject

to the respectively applicable national accident prevention rules and regulations. As a manufacturer, Adam

Hall is obligated to notify you formally about the existence of potential health risks. Hearing damage due to

high volume and prolonged exposure: When in use, this product is capable of producing high sound-pres-

sure levels (SPL) that can lead to irreversible hearing damage in performers, employees, and audience

members. For this reason, avoid prolonged exposure to volumes in excess of 90 dB.

MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY

You can find our current warranty conditions and limitation of liability at: http://www.adamhall.com/media/

shop/downloads/documents/manufacturersdeclarations.pdf

To request warranty service for a product, please contact Adam Hall GmbH, Daimler Straße 9, 61267 Neu

Anspach / Email Info@adamhall.com / 49 (0) 6081 / 9419-0

PROPER DISPOSAL OF THIS PRODUCT

(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)

(Valid in the European Union and other European countries with waste separation)

This symbol on the product, or the documents accompanying the product, indicates that this appliance

may not be treated as household waste. This is to avoid environmental damage or personal injury due

to uncontrolled waste disposal. Please dispose of this product separately from other waste and have it

recycled to promote sustainable economic activity.

HOW TO USE

The PMS02 is a professional quality 2-channel microphone splitter that allows you to split each mic

input into two discreet outputs. With the additional parallel outputs, it feeds the microphone signals into 3

mixing consoles simultaneously, e.g. FOH, monitor and recording or broadcast mixer.

Condenser microphones are easily phantom powered via the parallel outputs while the PMS02’s split

outputs are transformer isolated to prevent sound coloration and ground loop hum. The unit also features

a push button for ground lift.

TECHNICAL SPECIFICATIONS

Product category: splitters

Type: mic split box

Split function: 1 into 2 + 1

Channels: 2

Inputs: 2

Input connectors: XLR

Max. input level: + 4 dB

Split outputs per channel: 2

THRU outputs per channel: 1

Max. output level: + 4 dB

Output connectors: XLR

Transformer isolated outputs: yes

Controls: ground lift

Enclosure material: sheet steel

Enclosure surface: powder coated

Width: 115 mm

Depth: 46 mm

Height: 140 mm

Weight: 0.8 kg

FAX: ++49 (0)6081 43280 WEB: www.adamhall.com, www.palmer-germany.com EMAIL: info@palmer-germany.com

Produkt Specifikationer

Mærke:	Palmer
Kategori:	Ikke kategoriseret
Model:	MS 02

Har du brug for hjælp?

Hvis du har brug for hjælp til Palmer MS 02 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Palmer Manualer

Palmer PLI01 Manual

21 September 2025

Palmer SUPREME SOAKER Manual

11 September 2025

Palmer Tauber Manual

11 September 2025

Palmer PAN 04 Manual

11 September 2025

Palmer PLI-06 Manual

10 September 2025

Palmer RIVER inn Manual

29 August 2025

Palmer RIVER mosel Manual

28 August 2025

Palmer Monicon M G2 Manual

18 August 2025

Palmer Monicon L G2 Manual

18 August 2025

Palmer Monicon S G2 Manual

18 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Eschenbach laboCLIP Manual

30 Oktober 2025

Iogear GearPower GPAWC145W Manual

30 Oktober 2025

DeWalt DWST83471 Manual

30 Oktober 2025

Elvid SignalMaster UDX-HS Manual

30 Oktober 2025

First Alert SMCO600NV Manual

30 Oktober 2025

ROCWARE RM702 Manual

29 Oktober 2025

Trinnov D-MON Manual

29 Oktober 2025

Meliconi Base Wash Evo Manual

29 Oktober 2025

Olimpia Splendid Bi2 SL AIR Manual

29 Oktober 2025

Abus C523–C526 Manual

29 Oktober 2025