Panduit CCL3 Manual

Panduit slot CCL3

Læs gratis den danske manual til Panduit CCL3 (4 sider) i kategorien slot. Denne vejledning er vurderet som hjælpsom af 39 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 20 anmeldelser. Har du et spørgsmål om Panduit CCL3, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

INSTRUCTIONS V00029AF Rev. 01

FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.asp

-A

CCESS

N-Type and S-Type Cabinets

(CCL3 - Combination Lock Swing Handle

)

CCL3 - Combination Lock Swing Handle Installation

• Reference the latest revisions of the following instruction sheets for door removal (if necessary):

• N-Type Cabinets: CM598

• S-Type Cabinets: CM599

Page 1 of 4

Combination Lock Swing Handle Operation

• Default combination: “0,0,0”

• Set [3] dials to correct combination, or use key to open handle

SET NEW COMBINATION

• Open swing handle

• Rotate handle insert counter-clockwise 30º (from unlocked position) or

210º (from locked position)

• Set [3] dials to desired combination

• Return handle insert to original position

• Close swing handle

[3] Dials

Handle Insert (from unlocked)

(rotate counter-clockwise 30º

from unlocked position to set

new combination)

Handle Insert (from locked)

(rotate counter-clockwise 210º

from locked position to set new

combination)

NOTE

Entire handle assembly

must be removed from door

prior to installation of CCL3

INSTRUCTIONS V00029AF Rev. 01

For Technical Support: www.panduit.com/resources/install_maintain.asp

Page 2 of 4

Door

Handle

Backing

Plate

REMOVE:

-Cam Screw

(use 10mm socket wrench)

-Door Cam

-Cam Stop

(note orientation)

S-Type Single Hinge Door

Combination Lock Swing Handle Installation

• Remove Cam Screw (use 10mm socket wrench), Cam Stop (note orientation of Cam Stop), and Cam from existing handle

• Remove Door Handle Backing Plate and remove existing door handle (remove [2] Phillips screws)

• Install Combination Lock Swing Handle by securing Door Handle Backing Plate to Swing Handle with [2] Phillips screws

• Install Cam, Cam Stop, and Cam Screw (use 10mm socket wrench)

• Note orientation of Cam Stop

REMOVE EXISTING

DOOR HANDLE [2] Phillips

Screws

Existing

Door

Handle

INSTALL:

-Cam Screw

(use 10mm socket wrench)

-Door Cam

-Cam Stop

(note orientation)

Door Handle

Backing Plate

[2] Phillips

Screws

Combination Lock

Swing Handle

Produkt Specifikationer

Mærke:	Panduit
Kategori:	slot
Model:	CCL3

Har du brug for hjælp?

Hvis du har brug for hjælp til Panduit CCL3 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

slot Panduit Manualer

Panduit CCL3 Manual

8 August 2024

slot Manualer

Nyeste slot Manualer

Aqara Smart Door Lock A100 Zigbee Manual

11 Januar 2025

Abus 158 Manual

10 Januar 2025

Nuki Smart Lock 3.0 Manual

1 Januar 2025

LogiLink NBS002 Manual

28 December 2024

Middle Atlantic PFD-38A Manual

25 December 2024

Eura ELH-01H4 Manual

19 December 2024

Kidde AccessPoint 001827 Manual

11 December 2024

Abus 160er Manual

9 December 2024

Burg Wächter Entry 5711 KP PIN Manual

6 December 2024

Kensington K60508WW Manual

26 September 2024