Paxton Net2 Entry Control Manual

Paxton Sikkerhed adgangskontrolsystem Net2 Entry Control

Læs gratis den danske manual til Paxton Net2 Entry Control (4 sider) i kategorien Sikkerhed adgangskontrolsystem. Denne vejledning er vurderet som hjælpsom af 34 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 17.5 anmeldelser. Har du et spørgsmål om Paxton Net2 Entry Control, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

19/11/2012

Ins-30200 Net2 Entry - Control unit

Technical Support

Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT)

Saturday from 09:00 - 13:00 (GMT)

01273 811011 support@paxton.co.uk

Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/

Paxton

Description of product

The Net2 Entry control unit is the central interface between a panel and the door and provides data and PoE power

for the monitors. The ports can also be used to expand the network of panels and monitors through Net2 Entry

extension switches or to connect the control unit to a Net2 system running Net2 v4.25 or later.

0 V

12V

PSU

1 redaeR

:noituaC ylno sredaer CD V21 roF

2 redaeR

stupnI tputsuO

rewoP

repmaT/USP tcatnoC nottuB tixE 2 yaleR 1 yaleR

Expansion

Port 1Port 2Port 3Port 4Port 5

RxTx

RS485 Network

CAT5 Cable Coding

nrG

/thW

eraps ro neercS

atad morf seroc

elbac

gnrO/th

egnarO

10/100 Ethernet

Server Connected

Server Link 100

End of Line Termination

ON OFF

Net2 plus

Intruder Alarm

Set

mrA

MOC

.O.N

LABEL HERELABEL HERE

http://paxton.info/107

123456

00-01-02-03-04-05

2345612

INPUT AC 100-240V

50 / 60 Hz

1.2A

OUTPUT DC 13.8V 2A

Paxton recommend that the network cable is run

to each location and terminated in a network box.

A patch cable should then be used to link the unit

to the network. This makes unit replacement or

removal for building maintenance much easier.

1. PoE Switch ( 4 PoE + 1 standard port )

2. Net2 plus control unit

3. Tamper switch

4. 2A 12V DC power supply

5. Battery backup ( not supplied )

6. Plastic cabinet

236 mm 320 mm 80 mm

12v DC

0 °C 45 °C

Specications

Operating temperature

Electrical

Environment

Dimensions

Max

Height Depth

Features

Indoor use only IP Rating

Min

Max

Lock power considerations

The power required for the lock will limit the number of Net2 Entry devices that this control board will support.

Each control board has four network ports that can also provide PoE. The following table shows the devices that

can be supported by a Net2 Entry control unit depending on the power required for the lock.

The additional network connections are available to link to the Net2 PC server, other Net2 Entry control units or

network switch units to expand the system. These do not require PoE power.

If additional equipment (Exit button, internal reader/keypad, etc.) is to be tted, this must be included in the Lock

power requirement.

PSU output voltage

PoE network ports

Net2 plus port

IEEE 802.3af

Standard network ports

Net2 hardware and software

The access control function is administered by the Net2 system.

The installation of Net2 hardware and software is fully described in the Net2 documentation supplied with this unit

and also on the website as follows:

XIns-30080 - Net2 plus control unit < http://paxton.info/924 >

XAN1127 - Net2 Entry - Planning and installation < http://paxton.info/1896 >

PSU output current

Connect the entry panel to the control unit using the network cabling. Connect the monitor(s) to the control unit.

Further devices may easily be added as required in the future.

Power up the control unit.

The Net2 Entry panel and monitor(s) will power up using the PoE provided by the control unit.

Installation

Width

up to 650 mA

up to 500 mA

up to 350 mA

up to 200 mA

1 Panel only

1 Panel + 1 Monitor

1 Panel + 2 Monitors

1 Panel + 3 Monitors

Lock power required PoE powered devices Additional network connections

Resource Distribution

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to the standard EN55022, when using UTP (unshielded twisted pair) category cable. In order

to comply with the limits for a Class B digital device it is necessary to use FTP (foiled twisted pair) or

STP (shielded twisted pair) category cable on the PoE/network ports.

Produkt Specifikationer

Mærke:	Paxton
Kategori:	Sikkerhed adgangskontrolsystem
Model:	Net2 Entry Control
Produktfarve:	Hvid
Driftstemperatur (T-T):	0 - 45 °C
Dimensioner (BxDxH):	236 x 80 x 320 mm
Effektkrav:	12V DC