Paxton Touchlock K38 Manual

Paxton Sikkerhed adgangskontrolsystem Touchlock K38

Læs gratis den danske manual til Paxton Touchlock K38 (4 sider) i kategorien Sikkerhed adgangskontrolsystem. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Paxton Touchlock K38, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Ins-30077 - TOUCHLOCK K and KP series

Fitting

28/11/2011

Technical Support

Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT)

Saturday from 09:00 - 13:00 (GMT)

01273 811011 support@paxton.co.uk

K75 Screw connector option

The unit should be mounted in conjunction with

an electrical backbox to achieve the required

clearance for the connector.

If an adaptor plate (310-750) is tted, the

mountings on the backbox can also be used.

Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/

Cable extensions

Readers can be extended using Belden CR9540 10-core overall screened cable to a maximum of 100 metres.

Illustrations in this instruction show the standard keypad.

The Stainless Steel version installs and operates in exactly the same manner.

Indoor use only

Paxton

Switch2 controllers with WHITE labels are incompatible with these products. The keypads in the K and KP series,

can only be used with Switch2 controllers tted with YELLOW wiring labels.

When using this keypad style with Net2, the software version used must be v3.21 or later.

WHITE labelled Net2 control units provide 5V at the Red terminal. The Red power wire

for the reader should therefore be directly connected to the 12V ACU terminal.

Wiring

The reader port module is designed to convert the

standard reader ports on Switch2 and Net2 controllers

to accept one or two RJ45 connections. Pull off the

screw terminal block from the reader port and simply

replace it with this module.

This module can be used to provide a

connection point for the reader RJ45 plug.

The terminals on the module are then wired

colour for colour to the controller.

Alternatively, the reader can be wired directly

into the screw terminals of the control unit by

rst cutting off the RJ45 plug and stripping

back the wires in the cable.

Reader port module (325-030)

This module may be purchased separately to speed up

the installation and replacement of readers.

Connection modules

Further information on how to purchase Installer Tools is available at:

http://paxton.info/841

Reader junction box (325-020)

1 2 3

4 5 6

7 8 9

0 #



Connection to a control unit reader port

Produkt Specifikationer

Mærke:	Paxton
Kategori:	Sikkerhed adgangskontrolsystem
Model:	Touchlock K38
Produktfarve:	Rustfrit stål
Driftstemperatur (T-T):	-20 - 55 °C
Dimensioner (BxDxH):	38 x 12.5 x 78 mm
Certificering:	FCC\n
Effektkrav:	12V
Trådløs forbindelse:	Ingen
Strømforbrug:	1000 mA
Sikkerhed:	IPX7