Paxton Proximity P50 Manual

Paxton Sikkerhed adgangskontrolsystem Proximity P50

Læs gratis den danske manual til Paxton Proximity P50 (4 sider) i kategorien Sikkerhed adgangskontrolsystem. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om Paxton Proximity P50, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Ins-30002 PROXIMITY P series reader

24/11/2011

Technical Support

Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT)

Saturday from 09:00 - 13:00 (GMT)

01273 811011 support@paxton.co.uk

Fitting

Reader covers

Additional covers are available in black, white, grey, blue and silver. Registered installers can order these free

of charge by logging onto the secure installer extranet: http://paxton.info/1035 or if you are not a registered

installer please call us on: for more information.01273 811011

P75 Screw connector option

The unit should be mounted in conjunction with

an electrical backbox to achieve the required

clearance for the connector.

If an adaptor plate (310-750) is tted, the

mountings on the backbox can also be used.

Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/

Paxton

Indoor use only

WHITE labelled control units provide 5V at the Red terminal. The Red power wire

for the reader should therefore be directly connected to the 12V supply terminal.

Cable extensions

Readers can be extended using Belden CR9540 10-core overall screened cable to a maximum of 100 metres.

Wiring

The reader port module is designed to convert the

standard reader ports on Switch2 and Net2 controllers

to accept one or two RJ45 connections. Pull off the

screw terminal block from the reader port and simply

replace it with this module.

This module can be used to provide a

connection point for the reader RJ45 plug.

The terminals on the module are then wired

colour for colour to the controller.

Alternatively, the reader can be wired directly

into the screw terminals of the control unit by

rst cutting off the RJ45 plug and stripping

back the wires in the cable.

Reader port module (325-030)

This module may be purchased separately to speed up

the installation and replacement of readers.

Connection modules

Further information on how to purchase Installer Tools is available at:

http://paxton.info/841

Reader junction box (325-020)

Connection to a control

unit reader port

Produkt Specifikationer

Mærke:	Paxton
Kategori:	Sikkerhed adgangskontrolsystem
Model:	Proximity P50
Produktfarve:	Black, White
Driftstemperatur (T-T):	-20 - 55 °C
Dimensioner (BxDxH):	50 x 15 x 100 mm
Certificering:	FCC
Effektkrav:	12V
Trådløs forbindelse:	Ingen
Strømforbrug:	1000 mA
Sikkerhed:	IPX7