Pioneer CP-2EX Manual

Pioneer højttalerstøtte CP-2EX

Læs gratis den danske manual til Pioneer CP-2EX (40 sider) i kategorien højttalerstøtte. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Pioneer CP-2EX, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/40

CP-2EX

Speaker Stand / Socle d’enceinte / Lautsprecherständer /

Base per diffusori / Luidsprekerstandaard / Soportes de altavoz /

Suporte para colunas / Högtalarstativ / Højttalerstativ /

Høyttalerstativ / Kaiutinjalusta / Стойка под динамик

Thank you for buying this Pioneer product. Please read

through these operating instructions for proper assembly

and use. After you have finished reading the instructions, put

them away in a safe place for future reference.

Before you start

Before setting up your speaker system, we recommend

reading the operating instructions for your system thor-

oughly.

• Only use the screws supplied when fixing the speaker to

the speaker stand.

• Do not place the stand on an unstable and/or sloping

surface. The stand and speaker may fall and cause

injury.

• Do not use with any speaker system other than the one

for which the unit was designed. The stand may collapse

and be damaged and/or the speaker may fall and cause

injury.

• When moving the speaker and stand, first remove the

speaker from the stand, and then move the stand,

holding it by the two stems.

Installing the speaker stands

Place the stand on a stable, level surface; placing the stand

on an unstable surface can be dangerous.

When placing the speaker, keep in mind that the tone is

affected by the position of the speaker.

If the bass is insufficient, move the speaker closer to the wall.

The richest bass sound is obtained when the speaker is right

against the wall. If the bass is too powerful, producing a

muffled tone, move the speaker away from the wall. Placing

the speaker against a thick curtain may also be effective.

50 cm 20 cm

Adjust the position as necessary to obtain optimal sound

from your system.

•Pioneer assumes no liability whatsoever for damages

resulting from assembly, improper mounting, insuffi-

cient reinforcement, misuse of the product, acts of

nature, etc.

Assembling the speaker stands

Assemble the speaker stands as illustrated below. Please

note that a flathead screwdriver will be necessary for

assembly. The following illustration shows the fully assem-

bled speaker stand:

Screw holes

for securing

speaker

Speaker support

Stand base

Stand stems

• Align the screw holes on the stand base and speaker

support with the screw holes in the two stems, then

insert the screws and tighten.

Screws (Bind head, M6xL40)

40 mm

Black

Screws (Bind head, M6xL40)

Nut

Spike (SBA6053)

Spike base

(SLA1057)

40 mm

Black

Speaker

support

Stand

base

Stand

stems

Please note that sunken

screw holes are provided

in the speaker support.

(SBA6054)

•Make sure you assemble the stand on a flat surface that

is relatively soft (such as a carpet).

•Make sure the screws are inserted in the screw holes as

shown above (with the screw head hidden) when

securing the speaker. Improper setup could result in

damage or injury if the speaker falls from the stand.

Produkt Specifikationer

Mærke:	Pioneer
Kategori:	højttalerstøtte
Model:	CP-2EX

Har du brug for hjælp?

Hvis du har brug for hjælp til Pioneer CP-2EX stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

højttalerstøtte Pioneer Manualer

Pioneer CP-F150 Manual

1 August 2024

Pioneer CP-2EX Manual

18 Juli 2024

højttalerstøtte Manualer

Nyeste højttalerstøtte Manualer

NeoMounts NS-SHELF100 Manual

14 Januar 2025

Sonos Arc Ultra Wall Mount Manual

14 Januar 2025

Omnitronic STS-1 Manual

31 December 2025

Omnitronic EUMO-2 Manual

31 December 2025

Konig & Meyer 24496 Manual

30 December 2025

Bowers Wilkins FS-700 S3 Manual

30 December 2025

Vonyx DJP165 Manual

30 December 2025

Velleman VDLLB6 Manual

30 December 2025

Sanus HTB3 Manual

28 December 2024

Sanus EF24 Manual

28 December 2024