Planar SL4851 Manual
Læs gratis den danske manual til Planar SL4851 (46 sider) i kategorien overvåge. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Planar SL4851, eller vil du spørge andre brugere om produktet?
Side 1/46
Planar Simplicity Series
www.planar.com
Planar Simplicity Series
ii
Safety Instructions
Warnings and Precautions
KNOW THESE SAFETY SYMBOLS
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
This symbol indicates high voltage is present inside.
It is dangerous to make any kind of contact with any
inside part of this product.
This symbol alerts you that important literature
concerning operation and maintenance has been
included with this product.
CAUTION: FCC/CSA regulations state that any unauthorized
changes or modications to this equipment may void
the user’s authority to operate it.
CAUTION: To prevent electric shock, match the wide blade of plug
to the wide slot, and fully insert the plug.
TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR ELECTRIC
SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
The Socket-outlet should be installed near the apparatus and be easily
accessible.
Read and follow these instructions
when connecting and using your Public
Information Display:
• Unplug the display if you are not going to use it for an extensive
period of time.
• Unplug the display if you need to clean it with a slightly damp cloth.
The screen many be wiped with a dry cloth when the power is off.
However, never use alcohol, solvents or ammonia-based liquids.
• Consult a service technician if the display does not operate normally
when you have followed the instructions in this manual.
• The casing cover should be opened only by qualied service
personnel.
• Keep the display out of direct sunlight and away from stoves or any
other heat sources.
• Remove any object that could fall into the vents or prevent proper
cooling of the display’s electronics.
• Do not block the ventilation holes on the cabinet.
• Keep the display dry. To avoid electric shock, do not expose it to
rain or excessive moisture.
• If turning off the display by detaching the power cable, wait for 6
seconds before re-attaching the power cable for normal operation.
• To avoid the risk of shock or permanent damage to the set do not
expose the display to rain or excessive moisture.
• When positioning the display, make sure the power plug and outlet
are easily accessible.
• IMPORTANT: Always activate a screen saver program during your
application. If a still image in high contrast remains on the screen for
an extended period of time, it may leave an ‘after-image’ or ‘ghost
image’ on the front of the screen. This is a well-known phenomenon
that is caused by the shortcomings inherent in LCD technology. In
most cases the after-image will disappear gradually over a period
of time after the power has been switched off. Be aware that the
after-image symptom cannot be repaired and is not covered under
warranty.
Produkt Specifikationer
| Mærke: | Planar |
| Kategori: | overvåge |
| Model: | SL4851 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Planar SL4851 stil et spørgsmål nedenfor, og andre brugere vil svare dig
overvåge Planar Manualer
11 Januar 2025
8 Januar 2025
8 Januar 2025
16 December 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
6 September 2024
5 September 2024
3 September 2024
overvåge Manualer
- Westinghouse
- TVLogic
- Behringer
- Vidi-Touch
- Medion
- Onyx
- Sharp
- UPERFECT
- DataVideo
- Feelworld
- COMMBOX
- BenQ
- Hannspree
- BlueBuilt
- Shure
Nyeste overvåge Manualer
8 April 2025
8 April 2025
8 April 2025
7 April 2025
4 April 2025
2 April 2025
1 April 2025
30 Marts 2025
30 Marts 2025
30 Marts 2025