Planet GSD-1121XP Manual

Planet Skifte GSD-1121XP

Læs gratis den danske manual til Planet GSD-1121XP (4 sider) i kategorien Skifte. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om Planet GSD-1121XP, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1. Package Contents

Thank you for purchasing PLANET 8-Port 10/100/1000T 802.3at PoE +

2-Port 2.5G 802.3at PoE + 1-Port 10G SFP+ Ethernet Switch, GSD-1121XP.

In the following sections, the term means the “802.3at PoE+ Switch”

GSD-1121XP.

Open the box of the 802.3at PoE+ Switch and carefully unpack it. The

box should contain the following items:

802.3at PoE+ Switch x 1 User’s Manual x 1 Power Cord x 1

SFP Dust Cap

x 1 Screws x 8 Rack-mounting

Brackets x 2 Rubber Feet x 4

If any of these are missing or damaged, please contact your dealer

immediately; if possible, retain the carton including the original packing

material, and use them again to repack the product in case there is a

need to return it to us for repair.

2.2 LED Indicators

System

LED Color Function

PWR Green Lit: It indicates it has power.

Per Gigabit TP Port

LED Color Function

PoE-in-Use Amber

Lights to indicate that the port is providing

PoE to remote powered device.

O to indicate that the port is not a PoE

powered device (PD).

10/100/1000

LNK/ACT Green

Lights to indicate that the copper port is

successfully connecting to the network at

10/100/1000Mbps.

Blinks to indicate the copper port is receiving

or sending data.

3. Hardware Installation

3.1 Rack Mounting

To install the 802.3at PoE+ Switch in a 19-inch standard rack, follow the

instructions described below.

Step 1: Place your 802.3at PoE+ Switch on a hard at surface, with

the front panel positioned towards your front side.

Step 2: Attach a rack-mount bracket to each side of the 802.3at PoE+

Switch with supplied screws attached to the package. Figure

3-1 shows how to attach brackets to one side of the 802.3at

PoE+ Switch.

PoE-in-Use

ACTLNK

79 10 11

PWR

ACT

LNK10G

2.5G

10G

SFP

Figure 3-1: Attaching the Brackets to the 802.3at PoE+ Switch.

Caution

You must use the screws supplied with the mounting

brackets. Damage caused to the parts by using incorrect

screws would invalidate the warranty.

Step 3: Secure the brackets tightly.

Step 4: Follow the same steps to attach the second bracket to the

opposite side.

2.3 Rear Panel

The rear panel of the 802.3at PoE+ Switch indicates an AC power

socket and a switch, which accepts input power from 100 to 240V AC,

50-60Hz, 2.5A.

100-240V , 2.5A max.

50/60Hz

Figure 2-2: GSD-1121XP Switch Rear Panel

AC Power Receptacle

Power

Notice

The device is a power-required device, which means

it will not work till it is powered. If your networks

should be active all the time, please consider using UPS

(uninterrupted power supply) for your device. It will

prevent you from network data loss or network downtime.

Power

Notice

In some areas, installing a surge suppression device may

also help to protect your 802.3at PoE+ Switch from being

damaged by unregulated surge or current to the 802.3at

PoE+ Switch or the power adapter.

2. Hardware Introduction

2.1 Switch Front Panel

The front panel of the 802.3at PoE+ Switch consists of 8 auto-sensing

10/100/1000BASE-T RJ45 ports, 2 auto-sensing 100/1G/2.5GBASE-T RJ45

ports and 1 10GBASE-X SFP+ port. Figure 2-1 shows the front panel of

the 802.3at PoE+ Switch.

 Front View

PoE-in-Use

ACTLNK

7 9 10 11

PWR

ACT

LNK10G

2.5G

10G

SFP+

Figure 2-1: GSD-1121XP Front Panel

■ GigabitTPInterface

Eight 10/100/1000BASE-T RJ45 ports with 802.3af/at PoE+ injector

function, and auto-MDI/MDI-X

■ 2.5GTPInterface

Two 100/1G/2.5GBASE-T RJ45 ports with 802.3af/at PoE+ injector

function, and auto-MDI/MDI-X

■ 10GSFP+Port

One 10GBASE-X SFP+ port for transceiver module, enabling to have

a networking distance of 300 meters to 2km (multi-mode ber) and

10/20/40/60/80 kilometers (single-mode ber)

Per 2.5G TP Port

9 10

2.5G

LED Color Function

PoE-in-Use Amber

Lights to indicate that the port is providing

PoE to remote powered device.

O to indicate that the port is not a PoE

powered device (PD).

100/1G/2.5G

LNK/ACT Green

Lights to indicate that the copper port is

successfully connecting to the network at

100/1000/2500Mbps.

Blinks to indicate the copper port is receiving

or sending data.

10G SFP+ Port

PWR

ACT

LNK10G

10G

SFP+

LED Color Function

Fiber

LNK/ACT Amber

Lights to indicate that the ber optic port

is successfully connecting to the network at

10Gbps.

Blinks to indicate the ber optic port is

receiving or sending data.

2.4 GroundingtheDevice

Users MUST complete grounding wired with the device; otherwise, a

sudden lightning could cause fatal damage to the device.

100-240V , 2.5A max.

50/60Hz

Earth Ground

Note

EMD (Lightning) DAMAGE IS NOT CONVERED UNDER

WARRANTY.

Step 5: After the brackets are attached to the 802.3at PoE+ Switch,

use suitable screws to securely attach the brackets to the

rack, as shown in Figure 3-2.

PoE-in- U s e

ACTLNK

79 10 11

PWR

ACT

LNK10G

2.5G

10G

SFP

Figure 3-2: Mounting the 802.3at PoE+ Switch in a Rack

Step 6: Connect your 802.3at PoE+ Switch to 802.3af/802.3at

complied PDs and other network devices.

A. Connect one end of a standard network cable to the

100/1G/2.5GBASE-T RJ45 ports or 10GBASE-X SFP+ port on the

front panel of the 802.3at PoE+ Switch.

B. Connect the other end of the cable to the network devices such as

printer servers, workstations or routers, etc.

Step 7: Supply power to the 802.3at PoE+ Switch.

A. Connect one end of the power cable to the 802.3at PoE+ Switch.

B. Connect the power plug of the power cable to a standard wall

outlet.

When the 802.3at PoE+ Switch receives power, the Power LED should

remain solid Green.

Produkt Specifikationer

Mærke:	Planet
Kategori:	Skifte
Model:	GSD-1121XP

Har du brug for hjælp?

Hvis du har brug for hjælp til Planet GSD-1121XP stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skifte Planet Manualer

Planet DCS-7342-32C2X Manual

8 Oktober 2024

Planet DCS-7342-48Y8C Manual

8 Oktober 2024

Planet GSD-1121XP Manual

18 September 2024

Planet BSP-115PV-15A Manual

7 September 2024

Planet BSP-115HP-5A Manual

5 September 2024

Planet IGTP-805AT Manual

3 September 2024

Planet IPM-16230 Manual

3 September 2024

Planet FSD-804P Manual

3 September 2024

Planet UPOE-1600G Manual

1 September 2024

Planet WS-1032P Manual

1 September 2024

Skifte Manualer

Nyeste Skifte Manualer

Lancom GS-2412 Manual

4 April 2025

Lancom GS-2412P Manual

4 April 2025

Lancom GS-2426 Manual

4 April 2025

Hager ARF970D Manual

3 April 2025

Hager ARF920D Manual

3 April 2025

Roline 14.01.3579 Manual

2 April 2025

Fantini Cosmi B12BN Manual

1 April 2025

Fantini Cosmi B12DN Manual

1 April 2025

Fantini Cosmi B12GN Manual

1 April 2025

Fantini Cosmi B12HN Manual

1 April 2025