Planet IGS-500T Manual

Planet Skifte IGS-500T

Læs gratis den danske manual til Planet IGS-500T (4 sider) i kategorien Skifte. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 17 anmeldelser. Har du et spørgsmål om Planet IGS-500T, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1. Package Contents

Thank you for purchasing PLANET compact industrial 5-port

10/100/1000T Gigabit Ethernet Switch, IGS-500T. In the following

section, the term means the “Industrial Gigabit Ethernet Switch”

IGS-500T.

Open the box of the Industrial Gigabit Ethernet Switch and carefully

unpack it. The box should contain the following items:

Industrial Gigabit Ethernet Switch x 1 User’s Manual x 1

Wall-mount Kit DIN-rail Kit

If any of these are missing or damaged, please contact your dealer

immediately; if possible, retain the carton including the original packing

material, and use them again to repack the product in case there is a

need to return it to us for repair.

3. Product Specications

Model IGS-500T

Hardware Specications

Copper Ports 5 x 10/100/1000BASET RJ45 TP auto-MDI/

MDI-X, auto negotiation

Connector

Removable 6-pin terminal block

Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin

5/6 for Power 2

Alarm Provides one relay output for power failure

Alarm relay current carry ability: 1A@DC 24V

LED

3 x LED for system and power:

 Green: DC Power 1

 Green: DC Power 2

 Red: Power Fault

2 x LED for each copper port

 Green: 1000Mbps LNK/ACT

 Orange:10/100Mbps LNK/ACT

ESD Protection 6KV

EFT Protection 6KV

Power Requirements

12~48V DC, redundant power with polarity

reverse protection function, 24V AC power

support

Power Consumption

/ Dissipation 3.6 watts/12.35BTU

Installation DIN-rail kit and wall-mount ear

Enclosure IP30 metal case

Dimensions

(W x D x H) 70 x 104 x 30 mm

Weight 252g

LED Denition:

LED Color Function

P1 Green Lights to indicate power input 1 has power.

P2 Green Lights to indicate power input 2 has power.

Fault Red Lights to indicate that power 1 or power 2 has

failed.

1000

LNK/ACT Green

Lights: Indicating the port is running at

1000Mbps speed and successfully established.

Blinks: Indicating that the switch is actively

sending or receiving data over that port.

100

LNK/ACT Orange

Lights: Indicating the port is running at

10/100Mbps speed and successfully established.

Blinks: Indicating that the switch is actively

sending or receiving data over that port.

Top View:

1 2 3 4 5 6

Figure 3: IGS-500T Top View

4.2 Wiring the Power Inputs

The 6-contact terminal block connector on the top panel of Industrial

Gigabit Ethernet Switch is used for two DC redundant power inputs.

Please follow the steps below to insert the power wire.

4. Hardware Introduction

4.1 Three-View Diagram

The three-view diagram of the Industrial Gigabit Ethernet Switch

consists of ve auto-sensing 10/100/1000BASE-T RJ45 port and one

removable 6-pin terminal block. The LED indicators are also located

on the front panel.

18.00

9.00

91.00

52.00 52.00

104.00

30.00

50.00

30.00

70.00

21.69

28.65

Dimensions ( unit = mm )

Side View Front View Side View

Top View Bottom View

Rear View

P1 P2 FAULT

1000

100

ACTLNK

Figure 1: IGS-500T Three-View Diagram

2. Product Features

Physical Port

5-port 10/100/1000BASE-T RJ45 with auto-MDI/MDI-X function

Layer 2 Features

Complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX,

IEEE 802.3ab 1000BASE-T Ethernet standard

Supports auto-negotiation and 10/100Mbps half/full duplex and

1000Mbps full duplex

Prevents packet loss with back pressure (half-duplex) and IEEE

802.3x pause frame ow control (full-duplex)

High-performance Store and Forward architecture, broadcast storm

control and runt/CRC ltering eliminate erroneous packets to opti-

mize the network bandwidth

Backplane (switching fabric): 10Gbps

Integrated address look-up engine, supporting 4K absolute MAC

addresses

9K jumbo packet size

Automatic address learning and address aging

CSMA/CD Protocol

Industial Case and Installation

IP30 metal case

DIN rail and wall-mount design

12 to 48V DC, redundant power with polarity reverse protect func-

tion and connective, removable terminal block for master and slave

power; 24V AC power support

Supports 6000 VDC Ethernet ESD protection

-40 to 75 degrees C operating temperature

Free fall, shock-proof and vibration-proof for industries

Switch Specications

Switch Processing

Scheme Store-and-Forward

Address Table 4K entries

Buffer Memory 1M bits on-chip buffer memory

Flow Control Back pressure for half duplex

IEEE 802.3x pause frame for full duplex

Switch Fabric 10Gbps

Throughput

(packet per second) 7.4Mpps@64bytes

Jumbo Frame 9K

Network Cables

10/100/1000BASE-T

Cat. 3, 4, 5, 5e, 6 UTP cable (max. 100 meters)

EIA/TIA-568 100-ohm STP (max. 100 meters)

Standards Conformance

Standards

Compliance

IEEE 802.3 Ethernet

IEEE 802.3u Fast Ethernet

IEEE 802.3ab Gigabit Ethernet

IEEE 802.3x Full-Duplex Flow Control

IEEE 802.3az Energy Efcient Ethernet

IEEE 802.1p Class of Service

Regulatory

Compliance FCC Part 15 Class A, CE

Stability Testing

IEC 60068-2-32 (free fall)

IEC 60068-2-27 (shock)

IEC 60068-2-6 (vibration)

Environment

Temperature Operating: -40~75 degrees C

Storage: -40~75 degrees C

Humidity Operating: 5~90%,

Storage: 5~90% (non-condensing)

Front View:

P1 P2 FAULT

1000

100

ACTLNK

Figure 2: IGS-500T Front View

When performing any of the procedures like inserting the

wires or tightening the wire-clamp screws, make sure the

power is OFF to prevent from getting an electric shock.

1. Insert positive and negative DC power wires into contacts 1 and 2

for POWER 1, or contacts 5 and 6 for POWER 2.

1 2 3 4 5 6

2. Tighten the wire-clamp screws for preventing the wires from

loosening.

1 2 3 4 5 6

Power 1 Fault Power 2

+ - + -

Note

1. The wire gauge for the terminal block should be in the

range between 12 and 24 AWG.

2. The DC power input range is 12V ~ 48V DC and

supports 24V AC

3. Please just use one power input when using 24V AC.

Produkt Specifikationer

Mærke:	Planet
Kategori:	Skifte
Model:	IGS-500T
Kode for international beskyttelse (IP):	IP30
Bredde:	30 mm
Dybde:	70 mm
Højde:	104 mm
Vægt:	252 g
Produktfarve:	Blå
Opbevaringstemperatur (T-T):	-40 - 75 °C
Relativ luftfugtighed ved drift (H-H):	5 - 90 %
Relativ luftfugtighed ved opbevaring (H-H):	5 - 90 %
Strømforbrug (typisk):	3.6 W
Driftstemperatur (T-T):	-40 - 75 °C
Husmateriale:	Metal
Certificering:	FCC Part 15 Class A, CE\nIEC 60068-2-32 (free fall)\nIEC 60068-2-27 (shock)\nIEC 60068-2-6 (vibration)
Netværksstandarder:	IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
LED-indikatorer:	Ja
Kan monteres på væggen:	Ja
Harmoniseret systemkode (HS):	85176990
DC indgangsspænding:	24 V
Fuld duplex:	Ja
Strøm over Ethernet (PoE):	Ingen
Switch-type:	Ikke administreret
10G understøttelse:	Ingen
Auto MDI/MDI-X:	Ja
Flowkontrol support:	Ja
Basis omskiftning RJ-45 Ethernet porte, antal:	5
Basis omskiftning RJ-45 Ethernet porttype:	Gigabit Ethernet (10/100/1000)
Opbevar-og-frem:	Ja
MAC adresselabel:	4000 entries
Switch kapacitet:	10 Gbit/sek.
Gennnemløb:	7.4 Mpps
Jumbo Frames support:	Ja
Jumbo rammer:	9000
Varmeafgivelse:	12.35 BUT/t
Gigabit Ethernet (kobber) porte, antal:	5
MAC-adresse auto-indlæring understøttet:	Ja
MAC-adresse auto-forældelse understøttet:	Ja
DIN-skinne montering:	Ja
Auto-forhandling:	Ja
Pakke bufferlager:	1 MB
Redundant strømforsyning:	Ja
Understøttede kabeltyper:	Cat3, Cat4, Cat5, Cat5e, Cat6