Plugwise Stealth Manual

Plugwise Elmåler Stealth

Læs gratis den danske manual til Plugwise Stealth (3 sider) i kategorien Elmåler. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 18 anmeldelser. Har du et spørgsmål om Plugwise Stealth, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/3
Be wise, plug in.
Stealth installaon
Stealth installaon guide
Also applicable to: Stealth+, Stealth M, Stealth M+
Be aware:
The Stealth is specically designed
to be built in to an appliance/lighng
xture or as a permanently connected
device in the electrical installaon of
a building. Installaon should always
be executed by a registered installer
in compliance with the local electrical
code (e.g. BS 7671 or NEC).
It is required to include an overcurrent protecve device (circuit breaker),
that support a maximum rang of 16A (depending on your localisaon). Be
sure to switch o the circuit before installing the Stealth!
The product should be installed in a closed ame retardant casing with a
proper strain-relief mechanism.
Use the L↑ labelled clamp to connect the phase wire to the appliance and
connect the neutral wire to one of the ‘N’ labelled clamps. Then connect
the incoming phase wire to the clamp labelled ‘L’ and the neutral wire to
the free ‘N’ connecon.
For double phase 230V networks the second phase can be connected to the ‘N’ poles
(it will not be switched).
Informaon for the installer
Technical details
Voltage: 100-240 V~ Frequency: 50 / 60 Hz Total max. current: 16 A*
If a normal Stealth with relay is used, these addional maximum rangs apply:
• Inducve load: 4A
• Capacive load: 1A
Exceeding these rangs will adversely aect the service life of the relay!
Dimensions:
57.1 x 39 x 21 mm
ZigBee Dynamic MESH
2.4 GHz
E: helpdesk@plugwise.com T: +31(0) 252 43 30 70 W: www.plugwise.com
* Total max. current Stealth M and M+ : 20A.
All specicaons without prejudice.
See www.plugwise.com for detailed informaon.
Be wise, plug in.
Stealth installa฀on
Stealth installaon guide
1. Insert screwdriver and move in the direc฀on of the arrow (up)
2. Insert wire
L L N
Appliance/ circuit
Inverter
N
L
Be aware:
Connect the L↑ (black line) to the appliance to be measured (in this
example the inverter of the solar panel).

Produkt Specifikationer

Mærke: Plugwise
Kategori: Elmåler
Model: Stealth

Har du brug for hjælp?

Hvis du har brug for hjælp til Plugwise Stealth stil et spørgsmål nedenfor, og andre brugere vil svare dig


Elmåler Plugwise Manualer

Plugwise

Plugwise Stretch 3.0 Manual

20 Juli 2024
Plugwise

Plugwise Stealth M Manual

20 Juli 2024
Plugwise

Plugwise Stealth Manual

20 Juli 2024
Plugwise

Plugwise Start Stretch 3.0 Manual

20 Juli 2024
Plugwise

Plugwise Start Source Manual

20 Juli 2024

Elmåler Manualer

Nyeste Elmåler Manualer

Hager

Hager ECA310D Manual

1 Maj 2024
ORNO

ORNO OR-WE-517 Manual

26 August 2023
Hager

Hager ECR310D Manual

10 Juli 2023
ORNO

ORNO OR-WE-514 Manual

14 Maj 2023
Greenlee

Greenlee GT-12 Manual

19 December 2022
Greenlee

Greenlee GT-16 Manual

16 December 2022
Kathrein

Kathrein MSK 125/MR Manual

9 December 2022
ORNO

ORNO OR-WE-504 Manual

15 November 2022
Brennenstuhl

Brennenstuhl PM 231 E Manual

7 November 2022
ORNO

ORNO OR-WE-502 Manual

9 Oktober 2022