Plugwise Stealth M Manual

Plugwise Elmåler Stealth M

Læs gratis den danske manual til Plugwise Stealth M (7 sider) i kategorien Elmåler. Denne vejledning er vurderet som hjælpsom af 32 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 16.5 anmeldelser. Har du et spørgsmål om Plugwise Stealth M, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/7

Be wise, plug in.

Stealth installaon

Stealth installaon guide

Also applicable to: Stealth+, Stealth M, Stealth M+

Be aware:

The Stealth is specically designed

to be built in to an appliance/lighng

xture or as a permanently connected

device in the electrical installaon of

a building. Installaon should always

be executed by a registered installer

in compliance with the local electrical

code (e.g. BS 7671 or NEC).

It is required to include an overcurrent protecve device (circuit breaker),

that support a maximum rang of 16A (depending on your localisaon). Be

sure to switch o the circuit before installing the Stealth!

The product should be installed in a closed ame retardant casing with a

proper strain-relief mechanism.

Use the L↑ labelled clamp to connect the phase wire to the appliance and

connect the neutral wire to one of the ‘N’ labelled clamps. Then connect

the incoming phase wire to the clamp labelled ‘L’ and the neutral wire to

the free ‘N’ connecon.

For double phase 230V networks the second phase can be connected to the ‘N’ poles

(it will not be switched).

Informaon for the installer

Technical details

Voltage: 100-240 V~ Frequency: 50 / 60 Hz Total max. current: 16 A*

If a normal Stealth with relay is used, these addional maximum rangs apply:

• Inducve load: 4A

• Capacive load: 1A

Exceeding these rangs will adversely aect the service life of the relay!

Dimensions:

57.1 x 39 x 21 mm

ZigBee Dynamic MESH

2.4 GHz

E: helpdesk@plugwise.com T: +31(0) 252 43 30 70 W: www.plugwise.com

* Total max. current Stealth M and M+ : 20A.

All specicaons without prejudice.

See www.plugwise.com for detailed informaon.

Be wise, plug in.

Stealth installaon

Stealth installaon guide

1. Insert screwdriver and move in the direcon of the arrow (up)

2. Insert wire

L L N

Appliance/ circuit

Inverter

Be aware:

Connect the L↑ (black line) to the appliance to be measured (in this

example the inverter of the solar panel).

Produkt Specifikationer

Mærke:	Plugwise
Kategori:	Elmåler
Model:	Stealth M
Vekselstrømsindgangsfrekvens:	50 - 60 Hz
Bredde:	39 mm
Dybde:	21 mm
Højde:	57.1 mm
Produktfarve:	Black, White
Indgangsspænding:	100 - 240 V
Driftsfrekvens:	2400 MHz
Nominel strøm:	16 A