Point POMA20CFIL Manual


Læs gratis den danske manual til Point POMA20CFIL (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Point POMA20CFIL, eller vil du spørge andre brugere om produktet?

Side 1/3
1. This plasma filter can be applied to for all hoods that can be
used for re-circulation.
2. Connect the product with the attached plug.
3. The national legislation, building regulations regarding air
emissions must be observed.
4. Ensure that the connection between the product and the
hood is tight or the product will not work operate optimally.
5. Do NOT connect the product if the power cord is damaged.
6. The product has been designed for connection to φ150mm
exhaust.
6
7. When a hood is used for re-circulation of air and an
exhaust into the open air has not been installed, it is
important that the exhaust is not blocked or made smaller,
as this will damange the hood, increase noise levels and may
reduce the extraction performance. It is also important that a
non-return valve is not fitted.
INSTALLATION
GB
A.
Install the hood according to the requirements contained in the installation instructions for the
hood.
1. Universal Socket;
2. Main power cable socket;
3. Indicator lamp;
POMA40PFILPOMA60PFIL


Produkt Specifikationer

Mærke: Point
Kategori: Ikke kategoriseret
Model: POMA20CFIL

Har du brug for hjælp?

Hvis du har brug for hjælp til Point POMA20CFIL stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Point Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer