Porter-Cable PC70THD Manual

Porter-Cable Hamer PC70THD

Læs gratis den danske manual til Porter-Cable PC70THD (30 sider) i kategorien Hamer. Denne vejledning er vurderet som hjælpsom af 54 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 27.5 anmeldelser. Har du et spørgsmål om Porter-Cable PC70THD, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/30
7.0 Amp ½ in. (13mm) Dual Speed Hammer Drill
Marteau perforateur à deux vitesses de 7,0 A, 13 mm (1/2 po)
Taladro percutor de velocidad doble de 13 mm (1/2 pulgada)
y 7 amperios
CATALOG NUMBER
N° DE CATALOGUE
CATÁLOGO N°
PC70THD
Instruction manual
Manuel d’instructions
Manual de’instrucciones
www.portercable.com
INSTRUCTIVO DE OPERACIÓN, CENTROS DE
SERVICIO Y PÓLIZA DE GARANTÍA.
ADVERTENCIA: LÉASE ESTE INSTRUCTIVO
ANTES DE USAR EL PRODUCTO.
Thank you for choosing PORTER-CABLE! To register your new product, go to:
www.portercable.com/ServiceAndSupport/ProductRegistration.aspx
Merci d’avoir choisi PORTER-CABLE! Consulter le site Web www.portercable.
com/ServiceAndSupport/ProductRegistration.aspx pour enregistrer votre
nouveau produit.
Gracias por elegir PORTER-CABLE usted! Para registrar su nuevo producto,
visite: www.portercable.com / ServiceAndSupport / ProductRegistration.aspx
2
General Power Tool Safety Warnings
WARNING: Read all safety warnings and all instructions. Failure to follow
the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warningS and inStructionS for future reference
The term “power tool” in the warnings refers to your mains-operated (corded) power
tool or battery-operated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a ground
fault circuit interrupter (GFCI) protected supply. Use of a GFCI reduces the
risk of electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired or
under the influence of drugs, alcohol or medication. A moment of inattention
while operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust mask, nonskid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off position
before connecting to power source and/ or battery pack, picking up
or carrying the tool. Carrying power tools with your finger on the switch or
energizing power tools that have the switch on invites accidents.
SAFETY GUIDELINES - DEFINITIONS
It is important for you to read and understand this manual. The information it contains
relates to protecting The symbols YOUR SAFETY and PREVENTING PROBLEMS.
below are used to help you recognize this information.
DANGER: Indicates an imminently hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION: Indicates a potentially haz ard ous situation which, if not avoided,
may result in minor or mod er ate injury.
NOTICE: Used without the safety alert symbol indicates potentially hazardous
situation which, if not avoided, may result in property damage.

Produkt Specifikationer

Mærke: Porter-Cable
Kategori: Hamer
Model: PC70THD

Har du brug for hjælp?

Hvis du har brug for hjælp til Porter-Cable PC70THD stil et spørgsmål nedenfor, og andre brugere vil svare dig


Hamer Porter-Cable Manualer

Porter-Cable

Porter-Cable PC70THD Manual

22 Juli 2024

Hamer Manualer

Nyeste Hamer Manualer

Bavaria By Einhell

Bavaria By Einhell BBH 1500 Manual

2 April 2025
Bavaria By Einhell

Bavaria By Einhell BBH 520 Manual

2 April 2025
Bavaria By Einhell

Bavaria By Einhell BABH 24 Manual

2 April 2025
Bavaria By Einhell

Bavaria By Einhell BBH 826 Manual

2 April 2025
Einhell

Einhell EMH 125 Manual

29 Marts 2025
Kraftronic

Kraftronic KT-BH 1600 Manual

29 Marts 2025
Kraftronic

Kraftronic KT-BH 620 4F Manual

29 Marts 2025
Stanley

Stanley Fatmax SFMCD715 Manual

29 Marts 2025
Stanley

Stanley Fatmax SFMCD711 Manual

29 Marts 2025
Makita

Makita HM1304 Manual

26 Marts 2025