Premier Mounts AST-2446 Manual


Læs gratis den danske manual til Premier Mounts AST-2446 (2 sider) i kategorien Projektor tilbehør. Denne vejledning er vurderet som hjælpsom af 53 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 27 anmeldelser. Har du et spørgsmål om Premier Mounts AST-2446, eller vil du spørge andre brugere om produktet?

Side 1/2
AST-2446 Suspension Adapter
Page - 1 - Installation Instructions
9533-011-011-01
AST-2446 INSTALLATION INSTRUCTIONS
Single Stud Installation
Step 1. Secure the ceiling plate to the ceiling structure (see WARNING).
Step 2. Use suitable hardware (commercially available), depending on your installation environment, to secure
the two (2) mounting points found on the ceiling plate to the ceiling structure.
Step 3. Refer to ceiling adapter installation instructions.
The ceiling structure must be capable of supporting a weight of 400 lbs. If not, the ceiling must be reinforced. Proper
installation procedure by qualified personnel as outlined in the installation instructions must be adhered to. Failure to do
so could result in serious personal injury.
Make sure to hold the flat panel, or projector, securely and remove it from the mount to make the height adjustment
prior to loosening the adjustment screws. Loosen, remove, adjust then re-tighten the screws. Failure to do so could
result in injury and or damage to the flat panel or projector.
AST-2446 Suspension Adapter
Page - 2 - Installation Instructions
Concrete Surface Installation
Step 1. Secure the ceiling plate to the ceiling structure (see WARNING).
Step 2. Use suitable hardware (commercially available), depending on your installation environment, to secure the four (4) mounting
points found on the ceiling plate to the ceiling structure.
Step 3. Refer to ceiling adapter installation instructions.
The ceiling structure must be capable of supporting a weight of 400 lbs. If not, the ceiling must be reinforced. Proper
installation procedure by qualified personnel as outlined in the installation instructions must be adhered to. Failure to do
so could result in serious personal injury.
Make sure to hold the flat panel, or projector, securely and remove it from the mount to make the height adjustment
prior to loosening the adjustment screws. Loosen, remove, adjust then re-tighten the screws. Failure to do so could
result in injury and or damage to the flat panel or projector.


Produkt Specifikationer

Mærke: Premier Mounts
Kategori: Projektor tilbehør
Model: AST-2446

Har du brug for hjælp?

Hvis du har brug for hjælp til Premier Mounts AST-2446 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Projektor tilbehør Premier Mounts Manualer

Projektor tilbehør Manualer

Nyeste Projektor tilbehør Manualer